Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1997 Infiniti Q45 car and truck
repair procedures including Infiniti engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1997 Infiniti Q45 automobile. Try the Automotix DIY solution today!
BRAKE SERVICE PROCEDURES FOR 1997 Infiniti Q45 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Infiniti Q45 cars and light trucks from 1990+.
Disc Brakes -> Adjustments -> 1997-2001 -> 2002 -> Brake Pedal -> G20 -> I30 & I35 -> J30 -> J30 & Q45 -> Parking Brake -> Q45
Vehicle: 1997 Infiniti Q45 4.1 V8 GAS
Brake Pedal
G20
Refer to Fig. when adjusting brake pedal, noting the following"
- On models equipped with automatic transaxle, brake pedal height should be 6.26-6.65 inches.
- On models equipped with manual transaxle, brake pedal height should be 5.94-6.34 inches.
- On all models, pedal stopper to stop lamp or speed control switch should be .012-.039 inch.
I30 & I35
- Inspect brake pedal free height from dash reinforcement panel, Fig. .
- Loosen lock nut and adjust pedal free height by turning brake booster input rod. Tighten lock nut, Fig. .
- Inspect pedal free play and ensure stop lamps go off when ...
CLICK HERE TO GET FULL ACCESS TO 1997 Infiniti Q45 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Infiniti Q45 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Infiniti Q45 cars and light trucks from 1990+.
Anti-lock Brakes -> Description
Vehicle: 1997 Infiniti Q45 4.1 V8 GAS
The Anti-Lock Brake System (ABS) prevents the wheels from locking up when braking, regardless of the surface conditions. This allows the car to stop in a shorter distance, and allows the driver to maintain directional control of the vehicle during heavy braking.
During normal braking conditions, the ABS...
CLICK HERE TO GET FULL ACCESS TO 1997 Infiniti Q45 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Infiniti Q45 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Infiniti Q45 cars and light trucks from 1990+.
Disc Brakes -> Brake System Bleed
Vehicle: 1997 Infiniti Q45 4.1 V8 GAS
- Carefully monitor brake fluid level at master cylinder during bleeding procedure.
- Fill reservoir with new DOT 3 brake fluid.
- Ensure fluid level is full at all times.
- Connect transparent vinyl tube to air bleeder valve.
- Fully depress brake pedal several times.
- With brake pedal depressed, open air bleeder valve to release air.
- Close bleeder valve.
- Release brake pedal slowly.
- Repeat above steps until clear brake fluid comes out of air bleede...
CLICK HERE TO GET FULL ACCESS TO 1997 Infiniti Q45 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Infiniti Q45 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Infiniti Q45 cars and light trucks from 1990+.
Power Brake Units -> Power Brake Unit Service -> Overhaul -> Replacement
Vehicle: 1997 Infiniti Q45 4.1 V8 GAS
Replacement
- Connect tube to any bleeder valve.
- Open bleeder valve, drain fluid by depressing brake pedal until master cylinder is empty.
- Repeat previous steps for second circuit.
- Remove brake line flare and master cylinder mounting nuts.
- Remove clevis pin, Fig. .
- Remove mounting nuts and brake booster.
- Reverse procedure to install noting the following:
- Inspect output rod length by applying 1...
CLICK HERE TO GET FULL ACCESS TO 1997 Infiniti Q45 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Infiniti Q45 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Infiniti Q45 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed
Vehicle: 1997 Infiniti Q45 4.1 V8 GAS
Do not spill brake fluid on painted surfaces, it may cause damage to the paint. If brake fluid is spilled, wash immediately with water.
- Place container under master cylinder to avoid spillage, then fill master cylinder with brake fluid.
- Connect hose to bleeder valves and depress brake pedal several times.
- With pressure applied to pedal...
CLICK HERE TO GET FULL ACCESS TO 1997 Infiniti Q45 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Infiniti Q45 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Infiniti Q45 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Tightening Specifications
Vehicle: 1997 Infiniti Q45 4.1 V8 GAS
CLICK HERE TO GET FULL ACCESS TO 1997 Infiniti Q45 BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1997 Infiniti Q45 vehicle.
|
| Access the Complete guide! |
