Auto Parts Search
We have info for following modifications of 1996 Honda Prelude
- 1996 Honda Prelude S 2.2 L4 GAS, CC:2156, Fuel Injection
- 1996 Honda Prelude SI 2.3 L4 GAS, CC:2259, Fuel Injection
- 1996 Honda Prelude Vtec 2.2 L4 GAS, CC:2156, Fuel Injection
MAINTENANCE LAMP RESET PROCEDURES FOR 1996 Honda Prelude AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1996 Honda Prelude cars and light trucks sold in the U.S. from 1990+.
Honda -> Traction Control System (TCS) Warning Indicator ->
Vehicle: 1996 Honda Prelude S 2.2 L4 GAS
The Traction Control System warning lamp is used to warn of a system fault. The lamp monitors the condition of the Traction Control System system. It will be lit during engine start-up, but should go off when the self-diagnostic system determines that the system is operating properly. If the lamp remains lit, a fault in the Tra...
CLICK HERE TO GET FULL ACCESS TO 1996 Honda Prelude MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1996 Honda Prelude AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1996 Honda Prelude cars and light trucks sold in the U.S. from 1990+.
Honda -> Electric Power Steering (EPS) Warning Indicator ->
Vehicle: 1996 Honda Prelude S 2.2 L4 GAS
The Electric Power Steering (EPS) warning lamp should be illuminate when the ignition switch is placed in the On position and should turn Off as soon as the engine is started. If the indicator comes On while driving the vehicle, pull the vehicle off to the side of the road. Restart the system by restarting the engine. If the indicator does not go Off after driving a short distance, or comes On again, a fault in the electric ...
CLICK HERE TO GET FULL ACCESS TO 1996 Honda Prelude MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1996 Honda Prelude AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1996 Honda Prelude cars and light trucks sold in the U.S. from 1990+.
Honda -> Side Air Bag Off Lamp ->
Vehicle: 1996 Honda Prelude SI 2.3 L4 GAS
This indicator should light for a few seconds when the ignition switch placed in the On position and then go Off. The lamp is used a an alert that the passenger side air bag has been automatically shut off. The passenger side air bag w...
CLICK HERE TO GET FULL ACCESS TO 1996 Honda Prelude MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1996 Honda Prelude AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1996 Honda Prelude cars and light trucks sold in the U.S. from 1990+.
Honda -> Automatic Transmission D, D4 Or D5 Indicator Lamp -> 1996-2001 Prelude
Vehicle: 1996 Honda Prelude Vtec 2.2 L4 GAS
When the PCM detects an abnormal automatic transmission input or output signal the D lamp will usually blink and or the MIL will be illuminated. After completing diagnosis and repairs, reset the D or MIL as follows:
- Obtain t...
CLICK HERE TO GET FULL ACCESS TO 1996 Honda Prelude MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1996 Honda Prelude AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1996 Honda Prelude cars and light trucks sold in the U.S. from 1990+.
Honda -> Anti-Lock Brake System (ABS)/VSA System Warning Lamp -> 1990-96 Prelude
Vehicle: 1996 Honda Prelude S 2.2 L4 GAS
The Anti-Lock warning lamp is used to warn of a system fault. The lamp monitors the condition of the anti-lock brake system. It will be lit during engine start-up, but should go off when the self-diagnostic system determines that the system is operating properly. If the lamp remains lit, a fault in the anti-lock brake system is indicated. After diagnosis and repair of the system, the lamp may be turned off by disconnecting the ABS B2 (15 amp) fuse in the engine compartment relay panel for at least 3 seconds. The relay panel is located at the front LH side of the engine comp...
CLICK HERE TO GET FULL ACCESS TO 1996 Honda Prelude MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1996 Honda Prelude AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1996 Honda Prelude cars and light trucks sold in the U.S. from 1990+.
Honda -> Automatic Transmission (A/T) Fluid Temperature Indicator ->
Vehicle: 1996 Honda Prelude SI 2.3 L4 GAS
The A/T fluid temperature lamp will turn on when ignition switch is placed in On position and should turn off after a few seconds. If lamp illuminates while driving, the vehicle should be pulled off the r...
CLICK HERE TO GET FULL ACCESS TO 1996 Honda Prelude MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1996 Honda Prelude vehicle. |
Access the Complete guide! |