Auto Parts Search
We have info for following modifications of 1996 Acura TL
- 1996 Acura TL 2.5 L5 GAS, CC:2451, Fuel Injection
- 1996 Acura TL 3.2 V6 GAS, CC:3206, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Acura TL AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Acura TL cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1996 Acura TL 2.5 L5 GAS
- Loosen wheel nuts slightly.
- Raise front of vehicle, and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Drain differential oil. It is not necessary to drain differential oil when left driveshaft is removed.
- Raise locking tab on spindle nut, then remove nut.
- Remove self-locking nut and flange bolts from damper fork.
- Remove damper fork.
- Remove cotter pin from lower arm ball joint castle nut, and remove nut.
- Install a 14 mm hex nut on ball joint. Make sure hex nut is flush with ball joint pin end, or threaded section of ball joint pin might be ...
CLICK HERE TO GET FULL ACCESS TO 1996 Acura TL DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Acura TL AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Acura TL cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1996 Acura TL 2.5 L5 GAS
- Raise and support front of vehicle.
- Drain transaxle fluid into a suitable container.
- Remove left driveshaft assembly.
- Remove intermediate shaft bearing support attaching bolts.
- Lower bearing support and remove intermediate shaft from differential. T...
CLICK HERE TO GET FULL ACCESS TO 1996 Acura TL DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Acura TL AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Acura TL cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1996 Acura TL 3.2 V6 GAS
- Raise and support front of vehicle.
- Drain transaxle fluid into a suitable container.
- Remove left driveshaft assembly.
- Remove intermediate shaft bearing support attaching bolts.
- Lower bearing support and remove intermediate shaft from differential. T...
CLICK HERE TO GET FULL ACCESS TO 1996 Acura TL DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Acura TL AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Acura TL cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1996 Acura TL 3.2 V6 GAS
- Loosen wheel nuts slightly.
- Raise front of vehicle, and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Drain differential oil. It is not necessary to drain differential oil when left driveshaft is removed.
- Raise locking tab on spindle nut, then remove nut.
- Remove self-locking nut and flange bolts from damper fork.
- Remove damper fork.
- Remove cotter pin from lower arm ball joint castle nut, and remove nut.
- Install a 14 mm hex nut on ball joint. Make sure hex nut is flush with ball joint pin end, or threaded section of ball joint pin might be ...
CLICK HERE TO GET FULL ACCESS TO 1996 Acura TL DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1996 Acura TL vehicle. |
Access the Complete guide! |