Auto Parts Search
We have info for following modifications of 1995 Isuzu Pickup
- 1995 Isuzu Pickup 2.3 L4 GAS, CC:2254, Fuel Injection, Engine VIN:, Desg:L
- 1995 Isuzu Pickup Normal CAB 2.6 L4 GAS, CC:2559, Fuel Injection, Engine VIN:, Desg:E
- 1995 Isuzu Pickup Normal CAB 2.3 L4 GAS, CC:2254, Fuel Injection, Engine VIN:, Desg:L
BRAKE SERVICE PROCEDURES FOR 1995 Isuzu Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Isuzu Pickup cars and light trucks from 1990+.
Drum Brakes -> Adjustments -> Brake Pedal -> Parking Brake -> Rear Disc Brakes -> Rear Drum Brakes -> Service Brake -> Stylus
Vehicle: 1995 Isuzu Pickup 2.3 L4 GAS
Brake Pedal
Stylus
Measure the brake pedal height after making sure the pedal is fully released by the pedal return spring. Measure pedal height as shown in Fig. , dimension " L." Measurement should be 6.22 inches. If measurement is not as specified, proceed as follows:
- Loosen the stop lamp switch.
- Loosen locknut on the pushrod.
- Adjust the pushrod to the specified pedal height.
- Tighten locknut.
Amigo, Hombre, Pickup & Rodeo
- Measure brake pedal height and freeplay, Fig. , with brake pedal fully released.
- Pedal height should be 6.85-7.24 inches. Pedal freeplay should be .23-.35 inch.
- If measurem...
CLICK HERE TO GET FULL ACCESS TO 1995 Isuzu Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 Isuzu Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Isuzu Pickup cars and light trucks from 1990+.
Disc Brakes -> Brake Pad Service -> Amigo, Pickup, Rodeo & Trooper -> Front -> Hombre -> Installation -> Rear -> Removal -> Stylus
Vehicle: 1995 Isuzu Pickup 2.3 L4 GAS
Front
Hombre
- Remove 2/3 of brake fluid from master cylinder.
- Raise and support vehicle.
- Mark relationship of wheel to hub and remove tire/wheel assembly.
- Position "C" clamp around outer pad and caliper. Tighten "C" clamp until caliper piston bottoms in bore.
- Remove mounting bolts and inspect bolts and sleeves for corrosion.
- Remove caliper and suspend with wire to avoid damage to rubber brake line.
- Remove inner/outer pads and retainer spring.
- Reverse procedure to install, noting the following:
- Torque mounting bolts to 37 ft. lbs.
- Before moving vehicle, pump brake pedal several times ...
CLICK HERE TO GET FULL ACCESS TO 1995 Isuzu Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 Isuzu Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Isuzu Pickup cars and light trucks from 1990+.
Hydraulic Brake Systems -> Troubleshooting
Vehicle: 1995 Isuzu Pickup 2.3 L4 GAS
Refer to Fig. when trou...
CLICK HERE TO GET FULL ACCESS TO 1995 Isuzu Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 Isuzu Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Isuzu Pickup cars and light trucks from 1990+.
Hydraulic Brake Systems -> Description -> Combination Valve -> Diagonal Split Master Cylinder -> Dual Master Cylinder -> Fluid Level Sensor Switch -> Proportion Valves
Vehicle: 1995 Isuzu Pickup Normal CAB 2.6 L4 GAS
Dual Master Cylinder
The master cylinder contains two pistons that supply hydraulic pressure for a dual-circuit brake system. The primary piston provides the fluid pressure to the front brakes, while the secondary piston provides the fluid pressure to the rear brakes. If the pressure is lost from either system, the remaining system will function to stop the vehicle.
Diagonal Split Master Cylinder
The diagonal split master cylinder incorporates the functions of the standard dual master cylinder plus a fluid level sensor and proportioning valves. In a diagonal split system, the left rear...
CLICK HERE TO GET FULL ACCESS TO 1995 Isuzu Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 Isuzu Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Isuzu Pickup cars and light trucks from 1990+.
Hydraulic Brake Systems -> Description -> Combination Valve -> Diagonal Split Master Cylinder -> Dual Master Cylinder -> Fluid Level Sensor Switch -> Proportion Valves
Vehicle: 1995 Isuzu Pickup Normal CAB 2.3 L4 GAS
Dual Master Cylinder
The master cylinder contains two pistons that supply hydraulic pressure for a dual-circuit brake system. The primary piston provides the fluid pressure to the front brakes, while the secondary piston provides the fluid pressure to the rear brakes. If the pressure is lost from either system, the remaining system will function to stop the vehicle.
Diagonal Split Master Cylinder
The diagonal split master cylinder incorporates the functions of the standard dual master cylinder plus a fluid level sensor and proportioning valves. In a diagonal split system, the left rear...
CLICK HERE TO GET FULL ACCESS TO 1995 Isuzu Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1995 Isuzu Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1995 Isuzu Pickup cars and light trucks from 1990+.
Disc Brakes -> Brake Pad Service -> Amigo, Pickup, Rodeo & Trooper -> Front -> Hombre -> Installation -> Rear -> Removal -> Stylus
Vehicle: 1995 Isuzu Pickup Normal CAB 2.3 L4 GAS
Front
Hombre
- Remove 2/3 of brake fluid from master cylinder.
- Raise and support vehicle.
- Mark relationship of wheel to hub and remove tire/wheel assembly.
- Position "C" clamp around outer pad and caliper. Tighten "C" clamp until caliper piston bottoms in bore.
- Remove mounting bolts and inspect bolts and sleeves for corrosion.
- Remove caliper and suspend with wire to avoid damage to rubber brake line.
- Remove inner/outer pads and retainer spring.
- Reverse procedure to install, noting the following:
- Torque mounting bolts to 37 ft. lbs.
- Before moving vehicle, pump brake pedal several times ...
CLICK HERE TO GET FULL ACCESS TO 1995 Isuzu Pickup BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1995 Isuzu Pickup vehicle. |
Access the Complete guide! |