Auto Parts Search
We have info for following modifications of 1994 Jeep Wrangler
- 1994 Jeep Wrangler S 2.5 L4 GAS, CID:150, Fuel Injection, Aspiration:150, Engine VIN:, Desg:P
- 1994 Jeep Wrangler Sahara 4.0 L6 GAS, CID:242, Fuel Injection, Aspiration:242, Engine VIN:, Desg:S
- 1994 Jeep Wrangler Renegade 4.0 L6 GAS, CID:242, Fuel Injection, Aspiration:242, Engine VIN:, Desg:S
- 1994 Jeep Wrangler SE 4.0 L6 GAS, CID:242, Fuel Injection, Aspiration:242, Engine VIN:, Desg:S
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Jeep Wrangler AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Jeep Wrangler cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace
Vehicle: 1994 Jeep Wrangler S 2.5 L4 GAS
Clamp only the narrow forged portion of the yoke in the vise. Failure to heed caution may result in damage.
- Remove axle shaft.
- Remove bearing cap retaining snap rings. Saturate the bearing caps with penetrating oil prior to removal.
- Place socket (receiver) with inside diameter larger than bearing cap against yoke and perimeter of bearing cap to be removed.
- Pla...
CLICK HERE TO GET FULL ACCESS TO 1994 Jeep Wrangler DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Jeep Wrangler AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Jeep Wrangler cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace
Vehicle: 1994 Jeep Wrangler Renegade 4.0 L6 GAS
Clamp only the narrow forged portion of the yoke in the vise. Failure to heed caution may result in damage.
- Remove axle shaft.
- Remove bearing cap retaining snap rings. Saturate the bearing caps with penetrating oil prior to removal.
- Place socket (receiver) with inside diameter larger than bearing cap against yoke and perimeter of bearing cap to be removed.
- Pla...
CLICK HERE TO GET FULL ACCESS TO 1994 Jeep Wrangler DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Jeep Wrangler AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Jeep Wrangler cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 1994 Jeep Wrangler S 2.5 L4 GAS
Front
- With vehicle in neutral, position vehicle on hoist.
- Remove skid plate if equipped to gain access to propeller shaft.
- Mark a line across axle pinion flange, propeller shaft, flange yoke and transfer case for installation reference.
- Remove U-joint strap bolts at pinion shaft yoke.
- Remove transfer case yoke bolts.
- Push rear of propeller shaft forward to clear transfer case yoke.
- Remove propeller shaft from vehicle.
- Reverse procedure to install, noting the following:
- Align reference marks.
- Torque U-joint strap bolts t...
CLICK HERE TO GET FULL ACCESS TO 1994 Jeep Wrangler DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Jeep Wrangler AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Jeep Wrangler cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 1994 Jeep Wrangler SE 4.0 L6 GAS
Front
- With vehicle in neutral, position vehicle on hoist.
- Remove skid plate if equipped to gain access to propeller shaft.
- Mark a line across axle pinion flange, propeller shaft, flange yoke and transfer case for installation reference.
- Remove U-joint strap bolts at pinion shaft yoke.
- Remove transfer case yoke bolts.
- Push rear of propeller shaft forward to clear transfer case yoke.
- Remove propeller shaft from vehicle.
- Reverse procedure to install, noting the following:
- Align reference marks.
- Torque U-joint strap bolts t...
CLICK HERE TO GET FULL ACCESS TO 1994 Jeep Wrangler DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Jeep Wrangler AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Jeep Wrangler cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace
Vehicle: 1994 Jeep Wrangler SE 4.0 L6 GAS
Clamp only the narrow forged portion of the yoke in the vise. Failure to heed caution may result in damage.
- Remove axle shaft.
- Remove bearing cap retaining snap rings. Saturate the bearing caps with penetrating oil prior to removal.
- Place socket (receiver) with inside diameter larger than bearing cap against yoke and perimeter of bearing cap to be removed.
- Pla...
CLICK HERE TO GET FULL ACCESS TO 1994 Jeep Wrangler DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Jeep Wrangler AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Jeep Wrangler cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace
Vehicle: 1994 Jeep Wrangler Sahara 4.0 L6 GAS
Clamp only the narrow forged portion of the yoke in the vise. Failure to heed caution may result in damage.
- Remove axle shaft.
- Remove bearing cap retaining snap rings. Saturate the bearing caps with penetrating oil prior to removal.
- Place socket (receiver) with inside diameter larger than bearing cap against yoke and perimeter of bearing cap to be removed.
- Pla...
CLICK HERE TO GET FULL ACCESS TO 1994 Jeep Wrangler DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1994 Jeep Wrangler vehicle. |
Access the Complete guide! |