Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1994 Honda Prelude car and truck
repair procedures including Honda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1994 Honda Prelude automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1994 Honda Prelude
- 1994 Honda Prelude S 2.2 L4 GAS, CC:2156, Fuel Injection
- 1994 Honda Prelude SI 2.3 L4 GAS, CC:2259, Fuel Injection
- 1994 Honda Prelude 4WS 2.3 L4 GAS, CC:2259, Fuel Injection
- 1994 Honda Prelude Vtec 2.2 L4 GAS, CC:2156, Fuel Injection
BRAKE SERVICE PROCEDURES FOR 1994 Honda Prelude AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Honda Prelude cars and light trucks from 1990+.
Power Brake Units -> Power Brake Unit Service -> Power Booster Overhaul -> Power Booster, Replace
Vehicle: 1994 Honda Prelude S 2.2 L4 GAS
Power Booster, Replace
- Remove master cylinder as outlined under "Hydraulic Brake Systems."
- Disconnect vacuum hose from booster, then remove vacuum hose bracket.
- On Accord models, remove throttle control cable bracket.
- On Prelude models, remove throttle/cruise control cable bracket, then remove throttle cable grommet from engine compartment bulkhead.
- On Prelude models, remove IAT sensor from intake manifold.
- On Accord and Odyssey models, remove wiring harness from clamp.
- On Accord models with M/T, remove clutch reservoir and reservoir brac...
CLICK HERE TO GET FULL ACCESS TO 1994 Honda Prelude BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Honda Prelude AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Honda Prelude cars and light trucks from 1990+.
Anti-lock Brakes -> Description -> Accumulator -> Control Unit -> Master Cylinder -> Modulator Unit -> Operation -> Power Unit -> Pressure Switch -> Speed Sensor -> System Components
Vehicle: 1994 Honda Prelude Vtec 2.2 L4 GAS
Operation
The anti-lock brake system (ABS), Figs. through , modulates the pressure of the brake fluid applied to each caliper. This prevents the wheels from locking, whenever they are likely to be locked due to excessive braking. It then restores normal hydraulic pressure when there is no longer any possibility of wheel locking. The system has a fail safe function that allows normal braking if there is a problem within the system.
System Components
Master Cylinder
A tandem master cylinder is used in order to improve safety of the braking system. In addition, a center valve method is in...
CLICK HERE TO GET FULL ACCESS TO 1994 Honda Prelude BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Honda Prelude AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Honda Prelude cars and light trucks from 1990+.
Anti-lock Brakes -> Diagnosis & Testing -> 1993 Accord -> Civic & Civic del Sol -> Odyssey & 1994-96 Accord -> Prelude -> Self Diagnosis
Vehicle: 1994 Honda Prelude SI 2.3 L4 GAS
Self Diagnosis
Refer to wiring circuits Figs. through when diagnosing the anti-lock brake system.
Prelude
- Turn ignition switch on and ensure anti-lock warning light comes on.
- Start engine and check anti-lock warning light. If light goes off, there is no problem with anti-lock brake system. If light comes on, continue test.
- Stop engine and disconnect service check connector from connector cover located under front of center console.
- Connect both terminals of service check connector with a jumper wire, Fig. .
- Turn ignition switch on and record blinking frequency of anti-lock...
CLICK HERE TO GET FULL ACCESS TO 1994 Honda Prelude BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Honda Prelude AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Honda Prelude cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed
Vehicle: 1994 Honda Prelude SI 2.3 L4 GAS
Do not mix different brands of brake fluid, as they may not be compatible. Use only DOT 3 or 4 brake fluid.
Ensure brake fluid level in reservoir is at MAX (upper) level line.
- Have an assistant slowly pump brake pedal several times, then hold steady pressure.
- Loosen brake bleed screw to allow air to es...
CLICK HERE TO GET FULL ACCESS TO 1994 Honda Prelude BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Honda Prelude AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Honda Prelude cars and light trucks from 1990+.
Anti-lock Brakes -> Diagnosis & Testing -> 1993 Accord -> Civic & Civic del Sol -> Odyssey & 1994-96 Accord -> Prelude -> Self Diagnosis
Vehicle: 1994 Honda Prelude S 2.2 L4 GAS
Self Diagnosis
Refer to wiring circuits Figs. through when diagnosing the anti-lock brake system.
Prelude
- Turn ignition switch on and ensure anti-lock warning light comes on.
- Start engine and check anti-lock warning light. If light goes off, there is no problem with anti-lock brake system. If light comes on, continue test.
- Stop engine and disconnect service check connector from connector cover located under front of center console.
- Connect both terminals of service check connector with a jumper wire, Fig. .
- Turn ignition switch on and record blinking frequency of anti-lock...
CLICK HERE TO GET FULL ACCESS TO 1994 Honda Prelude BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Honda Prelude AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Honda Prelude cars and light trucks from 1990+.
Power Brake Units -> Adjustments -> Pushrod Clearance -> Pushrod Length
Vehicle: 1994 Honda Prelude Vtec 2.2 L4 GAS
Pushrod Clearance
Master cylinder pushrod-to-piston clearance must be checked and adjusted before installing master cylinder.
- Using pushrod adjustment gauge tool No. 07JAG-SD40100, or equivalent, adjust bolt so top of it is flush with end of master cylinder piston, Fig. .
- Install master cylinder rod seal between pushrod bolt adjustment gauge and brake booster.
- Without disturbing position of adjusting bolts, install gauge upside down on booster and torque nuts to 11 ft. lbs.
- Connect booster inline with a vacuum gauge, and maintain an engine speed that will deliver 20 inches of vacu...
CLICK HERE TO GET FULL ACCESS TO 1994 Honda Prelude BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1994 Honda Prelude vehicle.
|
| Access the Complete guide! |
