Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1993 Porsche 911 car and truck
repair procedures including Porsche engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1993 Porsche 911 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1993 Porsche 911
- 1993 Porsche 911 Carrera 3.6 H6 GAS, CC:3606, Fuel Injection, Engine VIN:, Desg:B
- 1993 Porsche 911 Carrera 4 3.6 H6 GAS, CC:3606, Fuel Injection
- 1993 Porsche 911 Turbo Look 3.6 H6 GAS, CC:3606, Fuel Injection, Engine VIN:, Desg:B
- 1993 Porsche 911 RS America 3.6 H6 GAS, CC:3606, Fuel Injection, Engine VIN:, Desg:B
- 1993 Porsche 911 Carrera 4 Turbo Look 3.6 H6 GAS, CC:3606, Fuel Injection, Engine VIN:, Desg:B
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1993 Porsche 911 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1993 Porsche 911 cars and light trucks from 1990+.
Starter, Replace -> Automatic Transmission -> Manual Transmission
Vehicle: 1993 Porsche 911 Turbo Look 3.6 H6 GAS
Automatic Transmission
- Disconnect battery ground cable.
- Disconnect battery and alternator wiring.
- Disconnect ignition lead.
- Remove starter attaching bolts, then the starter.
- Reverse procedure to install.
Manual Transmission
- Disconnect battery ground cable, then remove engine guard.
- Remove air distributor rail mounted on left and right sides of transmission.
- Separate driveshaft from differential flange.
- Disconnect solenoid electrical connectors.
- Remove wire clamp holding solenoid wire to body, then remove tie-wrap from starter.
- Remove clutch slave cylinder attaching bolts, then position sla...
CLICK HERE TO GET FULL ACCESS TO 1993 Porsche 911 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1993 Porsche 911 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1993 Porsche 911 cars and light trucks from 1990+.
Starter, Replace -> Automatic Transmission -> Manual Transmission
Vehicle: 1993 Porsche 911 Carrera 3.6 H6 GAS
Automatic Transmission
- Disconnect battery ground cable.
- Disconnect battery and alternator wiring.
- Disconnect ignition lead.
- Remove starter attaching bolts, then the starter.
- Reverse procedure to install.
Manual Transmission
- Disconnect battery ground cable, then remove engine guard.
- Remove air distributor rail mounted on left and right sides of transmission.
- Separate driveshaft from differential flange.
- Disconnect solenoid electrical connectors.
- Remove wire clamp holding solenoid wire to body, then remove tie-wrap from starter.
- Remove clutch slave cylinder attaching bolts, then position sla...
CLICK HERE TO GET FULL ACCESS TO 1993 Porsche 911 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1993 Porsche 911 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1993 Porsche 911 cars and light trucks from 1990+.
Starter, Replace -> Automatic Transmission -> Manual Transmission
Vehicle: 1993 Porsche 911 Carrera 4 Turbo Look 3.6 H6 GAS
Automatic Transmission
- Disconnect battery ground cable.
- Disconnect battery and alternator wiring.
- Disconnect ignition lead.
- Remove starter attaching bolts, then the starter.
- Reverse procedure to install.
Manual Transmission
- Disconnect battery ground cable, then remove engine guard.
- Remove air distributor rail mounted on left and right sides of transmission.
- Separate driveshaft from differential flange.
- Disconnect solenoid electrical connectors.
- Remove wire clamp holding solenoid wire to body, then remove tie-wrap from starter.
- Remove clutch slave cylinder attaching bolts, then position sla...
CLICK HERE TO GET FULL ACCESS TO 1993 Porsche 911 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1993 Porsche 911 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1993 Porsche 911 cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 1993 Porsche 911 Carrera 4 3.6 H6 GAS
- Disconnect battery ground cable at battery.
- Remove drive belt.
- Take off protective cap.
- Undo hexagon head nut (24mm A/F), using a multi-tooth wrench (include...
CLICK HERE TO GET FULL ACCESS TO 1993 Porsche 911 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1993 Porsche 911 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1993 Porsche 911 cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 1993 Porsche 911 Carrera 3.6 H6 GAS
- Disconnect battery ground cable at battery.
- Remove drive belt.
- Take off protective cap.
- Undo hexagon head nut (24mm A/F), using a multi-tooth wrench (include...
CLICK HERE TO GET FULL ACCESS TO 1993 Porsche 911 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1993 Porsche 911 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1993 Porsche 911 cars and light trucks from 1990+.
Starter, Replace -> Automatic Transmission -> Manual Transmission
Vehicle: 1993 Porsche 911 Carrera 4 3.6 H6 GAS
Automatic Transmission
- Disconnect battery ground cable.
- Disconnect battery and alternator wiring.
- Disconnect ignition lead.
- Remove starter attaching bolts, then the starter.
- Reverse procedure to install.
Manual Transmission
- Disconnect battery ground cable, then remove engine guard.
- Remove air distributor rail mounted on left and right sides of transmission.
- Separate driveshaft from differential flange.
- Disconnect solenoid electrical connectors.
- Remove wire clamp holding solenoid wire to body, then remove tie-wrap from starter.
- Remove clutch slave cylinder attaching bolts, then position sla...
CLICK HERE TO GET FULL ACCESS TO 1993 Porsche 911 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1993 Porsche 911 vehicle.
|
| Access the Complete guide! |
