Auto Parts Search
We have info for following modifications of 1993 Oldsmobile Achieva
- 1993 Oldsmobile Achieva S 3.3 V6 GAS, CID:204, Fuel Injection, Aspiration:204, Engine VIN:, Desg:N
- 1993 Oldsmobile Achieva S 2.3 L4 GAS, CID:138, Fuel Injection, Aspiration:138, Engine VIN:, Desg:D
- 1993 Oldsmobile Achieva S 2.3 L4 GAS, CID:138, Fuel Injection, Aspiration:138, Engine VIN:, Desg:3
- 1993 Oldsmobile Achieva S 2.3 L4 GAS, CID:140, Fuel Injection, Aspiration:140, Engine VIN:, Desg:A
- 1993 Oldsmobile Achieva SL 3.3 V6 GAS, CID:204, Fuel Injection, Aspiration:204, Engine VIN:, Desg:N
- 1993 Oldsmobile Achieva SL 2.3 L4 GAS, CID:138, Fuel Injection, Aspiration:138, Engine VIN:, Desg:D
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 Oldsmobile Achieva AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1993 Oldsmobile Achieva cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1993 Oldsmobile Achieva SL 3.3 V6 GAS
- Disconnect battery ground cable.
- Raise and support vehicle, then remove wheel and tire assembly.
- Install drive axle seal protector J-34754 or equivalent on outer joint.
- Insert a screwdriver or drift into caliper and rotor to prevent rotor from turning and remove hub nut and washer.
- Remove lower ball joint cotter pin and nut, then loosen joint using tool No. J-29330 or equivalent.
- If right axle is being removed, turn wheel to left, if left axle is being removed, turn wheel to right.
- Insert a prybar between suspension support and lower co...
CLICK HERE TO GET FULL ACCESS TO 1993 Oldsmobile Achieva DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 Oldsmobile Achieva AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1993 Oldsmobile Achieva cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1993 Oldsmobile Achieva SL 2.3 L4 GAS
- Disconnect battery ground cable.
- Raise and support vehicle, then remove wheel and tire assembly.
- Install drive axle seal protector J-34754 or equivalent on outer joint.
- Insert a screwdriver or drift into caliper and rotor to prevent rotor from turning and remove hub nut and washer.
- Remove lower ball joint cotter pin and nut, then loosen joint using tool No. J-29330 or equivalent.
- If right axle is being removed, turn wheel to left, if left axle is being removed, turn wheel to right.
- Insert a prybar between suspension support and lower co...
CLICK HERE TO GET FULL ACCESS TO 1993 Oldsmobile Achieva DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 Oldsmobile Achieva AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1993 Oldsmobile Achieva cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1993 Oldsmobile Achieva S 3.3 V6 GAS
- Disconnect battery ground cable.
- Raise and support vehicle, then remove wheel and tire assembly.
- Install drive axle seal protector J-34754 or equivalent on outer joint.
- Insert a screwdriver or drift into caliper and rotor to prevent rotor from turning and remove hub nut and washer.
- Remove lower ball joint cotter pin and nut, then loosen joint using tool No. J-29330 or equivalent.
- If right axle is being removed, turn wheel to left, if left axle is being removed, turn wheel to right.
- Insert a prybar between suspension support and lower co...
CLICK HERE TO GET FULL ACCESS TO 1993 Oldsmobile Achieva DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 Oldsmobile Achieva AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1993 Oldsmobile Achieva cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1993 Oldsmobile Achieva S 2.3 L4 GAS
- Disconnect battery ground cable.
- Raise and support vehicle, then remove wheel and tire assembly.
- Install drive axle seal protector J-34754 or equivalent on outer joint.
- Insert a screwdriver or drift into caliper and rotor to prevent rotor from turning and remove hub nut and washer.
- Remove lower ball joint cotter pin and nut, then loosen joint using tool No. J-29330 or equivalent.
- If right axle is being removed, turn wheel to left, if left axle is being removed, turn wheel to right.
- Insert a prybar between suspension support and lower co...
CLICK HERE TO GET FULL ACCESS TO 1993 Oldsmobile Achieva DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 Oldsmobile Achieva AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1993 Oldsmobile Achieva cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1993 Oldsmobile Achieva S 2.3 L4 GAS
- Disconnect battery ground cable.
- Raise and support vehicle, then remove wheel and tire assembly.
- Install drive axle seal protector J-34754 or equivalent on outer joint.
- Insert a screwdriver or drift into caliper and rotor to prevent rotor from turning and remove hub nut and washer.
- Remove lower ball joint cotter pin and nut, then loosen joint using tool No. J-29330 or equivalent.
- If right axle is being removed, turn wheel to left, if left axle is being removed, turn wheel to right.
- Insert a prybar between suspension support and lower co...
CLICK HERE TO GET FULL ACCESS TO 1993 Oldsmobile Achieva DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 Oldsmobile Achieva AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1993 Oldsmobile Achieva cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1993 Oldsmobile Achieva S 2.3 L4 GAS
- Disconnect battery ground cable.
- Raise and support vehicle, then remove wheel and tire assembly.
- Install drive axle seal protector J-34754 or equivalent on outer joint.
- Insert a screwdriver or drift into caliper and rotor to prevent rotor from turning and remove hub nut and washer.
- Remove lower ball joint cotter pin and nut, then loosen joint using tool No. J-29330 or equivalent.
- If right axle is being removed, turn wheel to left, if left axle is being removed, turn wheel to right.
- Insert a prybar between suspension support and lower co...
CLICK HERE TO GET FULL ACCESS TO 1993 Oldsmobile Achieva DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1993 Oldsmobile Achieva vehicle. |
Access the Complete guide! |