Auto Parts Search


      Over 40 million used auto parts online. Shop online for auto and truck parts and save up to 75%

1992 Oldsmobile 98 CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Oldsmobile REPAIR SHOPS DON'T WANT YOU TO KNOW

Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!

    Automotive Domain Names

    Help me findSearch

    Select Section

    Get Full Access Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1992 Oldsmobile 98 car and truck repair procedures including Oldsmobile engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your Oldsmobile 98 automobile. Try the Automotix DIY solution today!
    DIY REPAIR SAMPLES > CONTINUE EXPLORING >
    Using the Automotix DIY repair procedures will save you hundreds and even thousands of dollars! In addition, it will save you hours of touring the city searching for Oldsmobile mechanics you can trust. The Automotix DIY solution is particularly affordable. A full access to the entire DIY repair procedures and diagrams for your 1992 Oldsmobile 98 vehicle will cost less than a single gallon of gas. Here are some of the DIY repair tips and procedures you will find here:

    A/C & HEATER SERVICE PROCEDURES FOR 1992 Oldsmobile 98 AUTOMOBILES

    Computer Relearn Procedures -> General Motors Corp. -> 1997-98 -> 1998-2000 -> 1998-99 -> 1999-2001 -> 1999-2002 -> 2.2L & 2.4L Engines -> 2000-02 -> 2000-04 -> 2001-02 -> 2001-04 -> 3.1L, 3.4L, 3800/3.8L, 4.0L & 4.6L Engines -> 3.5L Engine -> 5.7L Engine -> Achieva, Alero, Grand Am & Skylark -> Achieva, Cavalier, Skylark & Sunfire -> Alero & Grand Am -> Alero & Malibu -> Aurora -> Aurora, Bonneville, DeVille, LeSabre & Seville -> Aurora, Bonneville, Grand Prix, LeSabre & Park Avenue -> Auto Learn Passlock Procedure -> Body Control Module (BCM) -> Bonneville -> Bonneville, Eighty Eight, LeSabre, LSS & Park Avenue -> C & K Series w/Diesel Engine -> C & K Trucks w/Diesel Engine -> Camaro & Firebird -> Catera -> Cavalier & Sunfire -> Century -> Century, Grand Prix, Impala, Intrigue, Lumina, Monte Carlo & Regal -> Century, Impala, Intrigue, Monte Carlo & Regal -> Corvette -> Crankshaft Position System Variation Learn -> Cutlass & Malibu -> Dash Integration Module (DIM) -> DeVille -> DeVille, Eldorado & Seville -> EEPROM -> Eldorado -> Engine Control Module (ECM) -> Engine Performance -> Except Park Avenue -> Grand Am -> Grand Prix & Regal -> Impala & Monte Carlo -> Instrument Panel Integration Module (IPM) -> Intrigue -> LeSabre -> Less Tech 2 Or Techline Terminal -> Light Truck & Vans -> Park Avenue -> Passenger Cars -> Passkey Module -> Passlock Learn Procedure -> PCM -> Powertrain Control Module (PCM) -> Powertrain Control Module (PCM) & Vehicle Control Module (VCM) -> Rear Integration Module -> Riviera -> Seville -> T50/T60/T20+ -> TDC Offset Adjustment -> Theft Deterrent System Programming -> VCM -> With Tech 2 -> With Techline Terminal & Scan Tool
    Vehicle: 1992 Oldsmobile 98 Regency Elite 3.8 V6 GAS

    Passenger Cars

    Body Control Module (BCM)
    Alero & Grand Am

    This procedure must be performed if the BCM, Passlock sensor or PCM is replaced. If BCM is not properly programmed, it will not control all the features properly.

    • Ensure battery is fully charged and ignition switch is in the ON position.
    • Connect a suitably programmed Tech II, or equivalent, scan tool to Data Link Connector (DLC).
    • Access scan tool "Special Functions" menu and follow scan tool instructions to program BCM.
    • If BCM fails to accept the pr...

    CLICK HERE TO GET FULL ACCESS TO 1992 Oldsmobile 98 A/C & HEATER SERVICE PROCEDURES

    BRAKE SERVICE PROCEDURES FOR 1992 Oldsmobile 98 AUTOMOBILES

    Hydraulic Brake Systems -> Brake System Bleed -> FLUSHING HYDRAULIC SYSTEM -> MANUAL BLEEDING -> PRESSURE BLEEDING -> WHEEL BLEEDING SEQUENCE
    Vehicle: 1992 Oldsmobile 98 Regency Touring 3.8 V6 GAS

    MANUAL BLEEDING

    Pressure bleeding is recommended for all hydraulic systems. However, if a pressure bleeder is unavailable, use the following procedure. Brake fluid damages painted surfaces. Immediately clean any spilled fluid.

    • Remove vacuum reserve by pumping brakes several times with engine off.
    • Fill master cylinder reservoir with clean brake fluid. Check fluid level often during bleeding procedure; do not let reservoir fall below half full.
    • If necessary, bleed master cylinder as follows:
      • Disconnect master cylinder forward brake line connection until fluid flows from reservoir. R...

    CLICK HERE TO GET FULL ACCESS TO 1992 Oldsmobile 98 BRAKE SERVICE PROCEDURES

    FUEL FILTER REPLACEMENT PROCEDURES FOR 1992 Oldsmobile 98 AUTOMOBILES

    General Motors Corp./Saturn Passenger Cars -> Fuel Pressure Relief -> Except Aveo, LaCrosse, LeMans (1988-93), Malibu & Malibu Maxx (2004-05), Metro, Nova, Prizm, Spectrum & Storm -> Engine Fuel Pressure Service Port -> Engines Less Fuel Pressure Service Port
    Vehicle: 1992 Oldsmobile 98 Regency Touring 3.8 V6 GAS

    Do not smoke or allow an open flame of any type when working on or near any fuel system related components. The highly flammable vapor mixtures may ignite, resulting in serious personal injury.

    Prior to disconnecting fuel lines, the fuel system pressure must be relieved to prevent accidental spray of fuel.

    After the battery has been disconnected and reconnected, some abnormal driveability symptoms may occur. The vehicle may need to be driven while the vehicle relearns its adaptive strateg...

    CLICK HERE TO GET FULL ACCESS TO 1992 Oldsmobile 98 FUEL FILTER REPLACEMENT PROCEDURES

    DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1992 Oldsmobile 98 AUTOMOBILES

    CV AXLE SHAFT, Replace
    Vehicle: 1992 Oldsmobile 98 Regency 3.8 V6 GAS

    • Raise and support vehicle, then remove tire and wheel assembly.
    • Install a brass drift or a screwdriver to prevent rotor from turning.
    • Remove shaft nut and washer.
    • Remove brake caliper from steering knuckle and suspend caliper assembly.
    • Remove rotor from hub and bearing assembly, then stabilizer shaft or link from control arm.
    • Remove ball joint from steering knuckle.
    • Remove drive axle from transaxle using axle shaft remover tool No. J-33008, a...

    CLICK HERE TO GET FULL ACCESS TO 1992 Oldsmobile 98 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

    STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1992 Oldsmobile 98 AUTOMOBILES

    Starter, Replace
    Vehicle: 1992 Oldsmobile 98 Regency Elite 3.8 V6 GAS

    When removing starter, note if any shims are used between the starter and mounting surface. If shims are found, reinstall in original locations.

    If starter is noisy during cranking, remove one .015 inch double shim or add one .015 inch single shim to the outer bolt. If starter makes a high pitched whine after engine start, add .01...

    CLICK HERE TO GET FULL ACCESS TO 1992 Oldsmobile 98 STARTER & ALTERNATOR REPLACEMENT PROCEDURES

    MAINTENANCE LAMP RESET PROCEDURES FOR 1992 Oldsmobile 98 AUTOMOBILES

    General Motors Corp./Saturn Cars -> Check Fuel Cap Lamp ->
    Vehicle: 1992 Oldsmobile 98 Regency 3.8 V6 GAS

    The Check Fuel Cap Lamp will illuminate momentarily when the ignition switch is placed in the on position as a bulb check. If...

    CLICK HERE TO GET FULL ACCESS TO 1992 Oldsmobile 98 MAINTENANCE LAMP RESET PROCEDURES

    RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 1992 Oldsmobile 98 AUTOMOBILES

    Heater Hose, Replace -> Inlet -> Outlet
    Vehicle: 1992 Oldsmobile 98 Regency Touring 3.8 V6 GAS

    Inlet

    • Drain cooling system into a suitable container.
    • Reposition heater hose inlet clamp at water outlet using hose clamp pliers.
    • Remove heater inlet hose from water outlet.
    • Reposition heater core inlet hose clamp at heater core using hose clamp pliers.
    • Remove hose from vehicle.
    • Reverse procedure to i...

    CLICK HERE TO GET FULL ACCESS TO 1992 Oldsmobile 98 RADIATOR & HOSE REPLACEMENT PROCEDURES

    SERPENTINE BELT SERVICE PROCEDURES FOR 1992 Oldsmobile 98 AUTOMOBILES

    Serpentine Drive Belt, Replace
    Vehicle: 1992 Oldsmobile 98 Regency Touring 3.8 V6 GAS

    • Remove the battery.
    • Rotate the supercharger tensioner counterclockwise, using a suitable tool to remove the drive belt.
    • Remove the superchar...

    CLICK HERE TO GET FULL ACCESS TO 1992 Oldsmobile 98 SERPENTINE BELT SERVICE PROCEDURES

    COMPONENT LOCATION DIAGRAMS FOR 1992 Oldsmobile 98 AUTOMOBILES

    Component location diagrams for most 1992 Oldsmobile 98 cars and light trucks sold in the U.S. from 1990+.

    Lower LH Front Of Engine Diagram for 1992 Oldsmobile 98 Regency Touring 3.8 V6 GASLower LH Front Of Engine Diagram for 1992 Oldsmobile 98 Regency Touring 3.8 V6 GAS

    Components on diagram:
  • Low Oil Level Sensor
  • LH Side Of Engine Compartment Diagram for 1992 Oldsmobile 98 Regency 3.8 V6 GASLH Side Of Engine Compartment Diagram for 1992 Oldsmobile 98 Regency 3.8 V6 GAS

    Components on diagram:
  • Vapor Canister Purge Solenoid
  • ELC Compressor Assembly
  • CLICK HERE TO GET FULL ACCESS TO 1992 Oldsmobile 98 PARTS/COMPONENTS LOCATION DIAGRAMS!

    WIRING DIAGRAMS FOR 1992 Oldsmobile 98 AUTOMOBILES

    OEM drawn wiring diagrams for most 1992 Oldsmobile 98 cars and light trucks sold in the U.S.

    1992 Oldsmobile 98 Regency Touring 3.8 V6 GAS Wiring Diagram1992 Oldsmobile 98 Regency Touring 3.8 V6 GAS Wiring Diagram

    Components on diagram:
  • HVAC Programmer
  • Blower Motor
  • Blower Control Module
  • 1992 Oldsmobile 98 Regency Elite 3.8 V6 GAS Wiring Diagram1992 Oldsmobile 98 Regency Elite 3.8 V6 GAS Wiring Diagram

    Components on diagram:
  • Security Indicator
  • Firm Ride Indicator
  • Traction OFF Indicator
  • AMP Indicator
  • CLICK HERE TO GET FULL ACCESS TO 1992 Oldsmobile 98 WIRING DIAGRAMS!

    TECHNICAL SERVICE BULLETINS FOR 1992 Oldsmobile 98 AUTOMOBILES

    OEM TSB listings for most 1992 Oldsmobile 98 cars and light trucks sold in the U.S. from 1985+.

    Document: Car and Truck Fix It Right the First Time Issues
    Vehicle: 1992 Oldsmobile 98 Regency 3.8 V6 GAS

    Auto Systems:
  • Labor Times, Manuals, Warranty, Aids
  • Document: GM TIRE WARRANTY PROGRAM CLAIMS GOODWILL GUIDELINES - REVISED
    Vehicle: 1992 Oldsmobile 98 Regency 3.8 V6 GAS

    Auto Systems:
  • Labor Times, Manuals, Warranty, Aids
  • Wheels, Tires, Wheel Bearings, Seals, Hubs
  • CLICK HERE TO GET FULL ACCESS TO 1992 Oldsmobile 98 TECHNICAL SERVICE BULLETINS!

    COMPONENT/PARTS SPECIFICATIONS FOR 1992 Oldsmobile 98 AUTOMOBILES

    BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 1992 Oldsmobile 98 cars and light trucks sold in the U.S. and Canada from 1970+.

    • Brake caliper mounting bolt torque
    • Brake drum runout, machining, & discard specs
    • Minimum brake lining thickness.
    • Brake rotor runout, parallelism, machining, discard, & finish specs

    A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 1992 Oldsmobile 98 cars and light trucks sold in the U.S. and Canada from 1980+.

    • Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap

    COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.

    PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules

    QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 1992 Oldsmobile 98 cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.

    • Automatic transmission/transaxles capacities, lubricant recommendations
    • Differential/final drive capacities, lube recommendations, grades, & viscosities
    • Final drive fill & drain plug torques
    • Number of lubrication fittings & plugs
    • Power steering, brake, & clutch fluid recommendations
    • Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
    • Number of lubrication fittings & plugs
    • Power steering, brake, & clutch fluid recommendations
    • Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
    • Severe service maintenance & interval recommendations
    • Tire sizes, wheel nut/bolt torque, pressures & rim sizes
    • Transfer case capacities, lube recommendations, grades, & viscosities

    TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 1992 Oldsmobile 98 cars and light trucks sold in the U.S. and Canada from 1980+

    • Airflow sensor electrical specifications
    • Tensioning specifications for systems with automatic tensioners
    • Barometric pressure sensor specs
    • Battery group number and cranking performance
    • Crankshaft & camshaft position sensor resistance
    • Engine compression pressures
    • Coolant temperature sensor specs
    • Computer advance.
    • Diesel fuel temperature sensor resistance.
    • Distributor advance specifications
    • Ignition pickup coil resistance
    • Exhaust gas recirculation temperature sensor resistance
    • Engine fastener torque values
    • Firing order diagrams
    • Fuel system pressures
    • Generator (alternator) specs
    • Intake air temperature sensor specs
    • Ignition coil specifications
    • Fuel injector resistance
    • Engine idle speeds
    • Knock sensor resistance
    • Manifold absolute pressure sensor specs
    • Mixture control solenoid resistance
    • Voltage regulator specs
    • Spark plug applications & gaps
    • Starter motor electrical specs.
    • Tensioning specifications for systems without automatic tensioners
    • Throttle body temperature sensor resistance
    • Ignition timing in degrees at rpm
    • Transmission oil temperature sensor resistance
    • Throttle position sensor specs
    • Vacuum sensor valve specs

    CLICK HERE TO GET FULL ACCESS TO 1992 Oldsmobile 98 SPECIFICATIONS DATA!

    Shop online for auto body parts, engines, wheels, lights...

    Click here to view more details about 1996 Oldsmobile 98 Window Motor, Rear, Driver Side, Front1996 Oldsmobile 98 Window Motor, Rear, Driver Side, Front, Supplied with 9-teeth gear; Manufactured to exact OE specifications using 100 percent new and durable components to ensure proper fit, operation, and long lasting performance..

    Source: Auto Body Parts Store

    $48.10

    Click here to view more details1993 Oldsmobile 98 Ignition Switch, 10-prong female terminal; A high quality, OE replacement ignition switch; With 2 years limited TrustBuilt warranty..

    Source: Auto Body Parts Store

    $66.38

    Click here to view more details about 1997 Oldsmobile Supreme Sedan Door Mirror Passenger Side1997 Oldsmobile Supreme Sedan Door Mirror Passenger Side, Passenger Side Power Door Mirror; Paint To Match, , .

    Source: Wheels / Rims, Mirrors & Lights Store

    $81.45

    Click here to view more details1985 Oldsmobile 98 Regency V6, 3.8 L, 231 CID Rebuilt Engine, FWD, 20 bolt pan, uses distributor. With oil pump kit only., Warranty: 3-Year/100,000 Mile, .

    Source: Rebuilt Engines Store

    $1,299.00

    Click here to view more details1993 Oldsmobile 98 Used Exhaust Manifold, 6-231 (3.8L), L. (Fr), Very Good.

    Source: Used Auto Parts Store

    $80.00

    Click here to view more details1991 Oldsmobile 98 Used Air Flow Meter/Sensor, 3.8, AUTO, FWD (6-231, 3.8L), Very Good.

    Source: Used Auto Parts Store

    $69.00
    More parts
    Help me findSearch
    Auto Repair Quick Search
    Help me find
    Search DIY repair manuals by VIN...
    Vehicle Identification Number is a unique serial number used by the automotive industry to identify individual motor vehicles

    Find out what info we have for your vehicle

    Get the Complete Technical Service Bulletins!
    Get the Complete Technical Service Bulletins!Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1992 Oldsmobile 98 vehicle.
    Access the Complete guide!
    Need To Fix Your Car or Truck?
    Save Money With Free Car Insurance Quote
    FREE car insurance quote
    Enter Zip Code:
    GOT A WEBSITE?Make money with Automotix

    Make money with Automotix Partner Program.

    Learn more

    Auto Repair Quick Search
    Help me find