Auto Parts Search
1992 Cadillac Seville CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Cadillac REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Section
- Component Locations
- Wiring Diagrams
- Technical Service Bulletins
- Specifications
- A/C & Heater Service
- Brake Service
- Fuel Filter Replacement
- Driveline, U-Joint & CV Axles Replacement
- Starter & Alternator Replacement
- Maintenance Lamp Reset
- Radiator & Hose Replacement
- Serpentine Belt Service
A/C & HEATER SERVICE PROCEDURES FOR 1992 Cadillac Seville AUTOMOBILES
Cooling Fans -> Passenger Cars Except Saturn -> CAVALIER -> 3.1L Engine -> COMPONENT REPLACEMENT -> Coolant Fan Does Not Turn Off With Engine Cool, A/C Mode Selector Off & Ignition Switch In RUN -> Coolant Fan Does Not Turn On -> COOLANT FAN, REPLACE -> DESCRIPTION -> Except 3.1L Engine -> System Check -> System Diagnosis -> SYSTEM DIAGNOSIS & TESTING -> TROUBLESHOOTING
Vehicle: 1992 Cadillac Seville STS 4.9 V8 GAS
DESCRIPTION
The coolant fan is turned on and off by the ECM based on inputs from the coolant temperature sensor, vehicle speed sensor and the A/C system, if equipped. Battery voltage is applied at all times to terminal 1 of the coolant fan relay and, when the ignition switch is in RUN position, battery voltage is applied to terminal 5 of the relay. The ECM energizes the coolant fan relay by grounding circuit 335. The relay energizes and battery voltage is applied to the coolant fan.
TROUBLESHOOTING
- If coolant fan does not operate, check fusible link L and H...
CLICK HERE TO GET FULL ACCESS TO 1992 Cadillac Seville A/C & HEATER SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1992 Cadillac Seville AUTOMOBILES
Disc Brakes -> AC-Delco Single Piston Rear Disc Brake (Type 2) -> Precautions
Vehicle: 1992 Cadillac Seville 4.9 V8 GAS
- Grease or any other foreign material must be kept off the brake linings, caliper, surfaces of the disc and external surfaces of the hub, during service procedures. Handling the brake disc and caliper should be done in a way to avoid deformation of the disc and nicking or scratching brake linings.
- If inspection reveals rubber piston seals are worn or damaged, they should be replaced immediately.
- During removal and installation of a wheel assembly, exercise care so as not to interfere wi...
CLICK HERE TO GET FULL ACCESS TO 1992 Cadillac Seville BRAKE SERVICE PROCEDURES
FUEL FILTER REPLACEMENT PROCEDURES FOR 1992 Cadillac Seville AUTOMOBILES
General Motors Corp./Saturn Passenger Cars -> Fuel Filter Scheduled Maintenance -> 1980-06 Gasoline Engine Models Except Catera, LeMans (1988-93) Metro, Nova (1985-88), Saturn & Sprint -> Normal Service -> Severe Service
Vehicle: 1992 Cadillac Seville STS 4.9 V8 GAS
CLICK HERE TO GET FULL ACCESS TO 1992 Cadillac Seville FUEL FILTER REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1992 Cadillac Seville AUTOMOBILES
CV AXLE SHAFT, Replace
Vehicle: 1992 Cadillac Seville STS 4.9 V8 GAS
- Raise and support vehicle, then remove tire and wheel assembly.
- Install a brass drift or a screwdriver to prevent rotor from turning.
- Remove axle nut and washer.
- Remove stabilizer shaft or link from control arm.
- Remove nut from ball joint, then separate ball joint from steering knuckle using separator tool No. J-36226, or equivalent.
- Remove drive axle from hub and bearing assembly using front ...
CLICK HERE TO GET FULL ACCESS TO 1992 Cadillac Seville DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1992 Cadillac Seville AUTOMOBILES
Alternator, Replace
Vehicle: 1992 Cadillac Seville STS 4.9 V8 GAS
- Disconnect battery ground cable.
- Remove accessory drive belt.
- Remove upper front bolt.
- Remove radiator.
- Raise and suitably support vehicle.
- Remove front engine splash shield.
- Loosen rear alternator bracket from engine.
- Remove top bolt.
- Remove front lower mounting bolt.
- Remove lower rear mounting bolt.
- Remove upper rear mounting bolt.
- Remove duct from back of alternator.
- Disconnect regulator electrical connectio...
CLICK HERE TO GET FULL ACCESS TO 1992 Cadillac Seville STARTER & ALTERNATOR REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1992 Cadillac Seville AUTOMOBILES
General Motors Corp./Saturn Cars -> Check Engine Or Service Now Soon Engine Indicator Lamps (Gasoline Engines w/Electronic Engine Controls Or EFI) -> Except LeMans, Metro, Prizm, Storm & Vibe
Vehicle: 1992 Cadillac Seville STS 4.9 V8 GAS
The Check Engine lamp should light when the ignition is turned On. When the engine is started, the lamp should go off. If the lamp remains on for 10 seconds or constantly after the engine is started, the self diagnosis system has detected a fault condition and has stored a code in the system Electronic Control Module (ECM) or Powertrain Control Module (PCM). After diagnosis and repair, the ECM memory can be cleared of codes as follows:
On models except Cadillac with DEFI, remove the ECM/PCM fuse or disconnect the battery ground cable for approximately 30...
CLICK HERE TO GET FULL ACCESS TO 1992 Cadillac Seville MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 1992 Cadillac Seville AUTOMOBILES
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 1992 Cadillac Seville STS 4.9 V8 GAS
Inlet
- Drain cooling system into a suitable container.
- Reposition heater hose inlet clamp at water supply tube using hose clamp pliers.
- Remove heater inlet hose from water supply tube.
- Reposition heater core inlet hose clamp at heater core using hose clamp pliers.
- Remove hose from heater core.
- Remove hose from vehicle.
- Reverse procedure to in...
CLICK HERE TO GET FULL ACCESS TO 1992 Cadillac Seville RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 1992 Cadillac Seville AUTOMOBILES
Serpentine Drive Belt, Replace
Vehicle: 1992 Cadillac Seville STS 4.9 V8 GAS
- Disable airbag system.
- Rotate belt tensioner upward from drive bel...
CLICK HERE TO GET FULL ACCESS TO 1992 Cadillac Seville SERPENTINE BELT SERVICE PROCEDURES
COMPONENT LOCATION DIAGRAMS FOR 1992 Cadillac Seville AUTOMOBILES
Component location diagrams for most 1992 Cadillac Seville cars and light trucks sold in the U.S. from 1990+.
Below Luggage Compartment Lid Diagram for 1992 Cadillac Seville STS 4.9 V8 GAS Components on diagram: |
LH Front Of Engine Diagram for 1992 Cadillac Seville STS 4.9 V8 GAS Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO 1992 Cadillac Seville PARTS/COMPONENTS LOCATION DIAGRAMS!
WIRING DIAGRAMS FOR 1992 Cadillac Seville AUTOMOBILES
OEM drawn wiring diagrams for most 1992 Cadillac Seville cars and light trucks sold in the U.S.
1992 Cadillac Seville 4.9 V8 GAS Wiring Diagram Components on diagram: |
1992 Cadillac Seville 4.9 V8 GAS Wiring Diagram Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO 1992 Cadillac Seville WIRING DIAGRAMS!
TECHNICAL SERVICE BULLETINS FOR 1992 Cadillac Seville AUTOMOBILES
OEM TSB listings for most 1992 Cadillac Seville cars and light trucks sold in the U.S. from 1985+.
Document: Car and Truck Fix It Right the First Time Issues Vehicle: 1992 Cadillac Seville 4.9 V8 GAS Auto Systems: |
Document: GM TIRE WARRANTY PROGRAM CLAIMS GOODWILL GUIDELINES - REVISED Vehicle: 1992 Cadillac Seville 4.9 V8 GAS Auto Systems: |
CLICK HERE TO GET FULL ACCESS TO 1992 Cadillac Seville TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR 1992 Cadillac Seville AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 1992 Cadillac Seville cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 1992 Cadillac Seville cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 1992 Cadillac Seville cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 1992 Cadillac Seville cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO 1992 Cadillac Seville SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1992 Cadillac Seville vehicle. |
Access the Complete guide! |