Auto Parts Search
BRAKE SERVICE PROCEDURES FOR 1992 Cadillac Eldorado AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1992 Cadillac Eldorado cars and light trucks from 1990+.
Disc Brakes -> AC-Delco Single Piston Front Disc Brake (Type 2) -> Caliper Service -> CALIPER ASSEMBLE -> CALIPER DISASSEMBLE -> CALIPER INSTALLATION -> CALIPER REMOVAL
Vehicle: 1992 Cadillac Eldorado 4.9 V8 GAS
CALIPER REMOVAL
- Remove approximately 2/3 of brake fluid from master cylinder.
- Raise and support front of vehicle, then remove wheel and tire assembly.
- Position suitable pliers over inboard pad and housing as shown in Fig. , and squeeze pliers to compress caliper piston.
- If caliper assembly is being removed for service, remove inlet fitting attaching bolt, copper washer, and inlet fitting from caliper housing. Plug opening in inlet fitting to prevent fluid loss and contamination. Do not crimp brake hose, as this may damage internal structure of hose. If only shoe and lining assemblie...
CLICK HERE TO GET FULL ACCESS TO 1992 Cadillac Eldorado BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1992 Cadillac Eldorado AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1992 Cadillac Eldorado cars and light trucks from 1990+.
Disc Brakes -> AC-Delco Single Piston Front Disc Brake (Type 2) -> Brake Pad Service -> INSTALLATION -> REMOVAL
Vehicle: 1992 Cadillac Eldorado 4.9 V8 GAS
REMOVAL
- Remove caliper assembly as described in "Caliper Service."
- Remove shoe and lining assemblies from caliper, Figs. through , noting the following:
- On models with tab mount outer shoe (all except series 3264), straighten bent over shoe tabs with suitable pliers.
- On models with spring mount outer shoe (series 3264), insert screwdriver between shoe and caliper and disengage buttons on shoe from holes in caliper.
- Remove sleeves and bushings from grooves in caliper mounting bolt holes, Figs. through .
INSTALLATION
- Lubricate new bushings with suitable grease, install bushings in cali...
CLICK HERE TO GET FULL ACCESS TO 1992 Cadillac Eldorado BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1992 Cadillac Eldorado AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1992 Cadillac Eldorado cars and light trucks from 1990+.
Power Brake Units -> Adjustments -> AC-Delco Type -> AIR METHOD -> BRAKE PEDAL -> GAUGE METHOD -> PUSHROD -> Single Diaphragm Type -> Toyota/GM Single Diaphragm Type
Vehicle: 1992 Cadillac Eldorado 4.9 V8 GAS
BRAKE PEDAL
Toyota/GM Single Diaphragm Type
- With engine running and brake pedal in rest position, measure distance between face of pedal and floor mat.
- If distance is not 5.79-6.18 inches, adjust pedal height as follows:
- Remove left lower instrument panel trim section and air duct.
- Loosen stop lamp switch sufficiently to gain clearance for pedal adjustment.
- Loosen locknut and rotate pedal pushrod as needed to obtain specified pedal height, then tighten locknut.
- Adjust position of brake light switch so that plunger lightly contacts pedal stopper and brake lamps are off when pedal is release...
CLICK HERE TO GET FULL ACCESS TO 1992 Cadillac Eldorado BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1992 Cadillac Eldorado AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1992 Cadillac Eldorado cars and light trucks from 1990+.
Hydraulic Brake Systems -> Hydraulic Brake System Specifications
Vehicle: 1992 Cadillac Eldorado 4.9 V8 GAS
CLICK HERE TO GET FULL ACCESS TO 1992 Cadillac Eldorado BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1992 Cadillac Eldorado AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1992 Cadillac Eldorado cars and light trucks from 1990+.
Power Brake Units -> Power Brake Unit Service -> AC-DELCO TANDEM DIAPHRAGM TYPE -> Assemble -> Assembly -> BCIA SINGLE DIAPHRAGM TYPE -> BCIA TANDEM DIAPHRAGM TYPE -> Disassemble -> Disassembly -> GEO METRO SINGLE DIAPHRAGM TYPE -> OVERHAUL -> TOYOTA/GM SINGLE DIAPHRAGM TYPE
Vehicle: 1992 Cadillac Eldorado 4.9 V8 GAS
AC-DELCO TANDEM DIAPHRAGM TYPE
OVERHAUL
Disassemble
- Remove pedal pushrod boot, silencer, check valve, vacuum switch and grommets, as equipped, then the front housing seal.
- Scribe matching marks between front and rear housing sections, then mount booster assembly in suitable holding fixture with rear housing facing up.
- Apply pressure to housing with holding fixture forcing screw and rotate rear housing counterclockwise to unlock housing halves.
- Slowly release spring tension, then remove booster assembly from holding fixture. Do not allow spring tension to release suddenly, as ...
CLICK HERE TO GET FULL ACCESS TO 1992 Cadillac Eldorado BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1992 Cadillac Eldorado AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1992 Cadillac Eldorado cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> MASTER CYLINDER
Vehicle: 1992 Cadillac Eldorado 4.9 V8 GAS
MASTER CYLINDER
- Disconnect wire connector from brake warning pressure switch.
- Disconnect brake line...
CLICK HERE TO GET FULL ACCESS TO 1992 Cadillac Eldorado BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1992 Cadillac Eldorado vehicle. |
Access the Complete guide! |