Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2002 Toyota 4runner car and truck
repair procedures including Toyota engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2002 Toyota 4runner automobile. Try the Automotix DIY solution today!
BRAKE SERVICE PROCEDURES FOR 2002 Toyota 4runner AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Toyota 4runner cars and light trucks from 1990+.
Disc Brakes -> Rear Disc & Parking Brakes -> Parking Brake Service -> Avalon, Camry, Camry Solara, Celica & Supra -> Land Cruiser & Sequoia -> Shoes, Replace
Vehicle: 2002 Toyota 4runner 3.4 V6 GAS
Avalon, Camry, Camry Solara, Celica & Supra
Shoes, Replace
- Raise and support rear of vehicle, then remove tire and wheel assembly.
- Remove rear caliper.
- Remove rotor disc.
- Remove shoe return springs, Figs. and .
- Using strut remover 09717-20010, or equivalent, remove shoe strut and spring.
- Slide front shoe from under shoe hold-down spring, then remove shoe adjusting screw, tension spring and remove shoe.
- Slide rear from shoe hold-down spring, then disconnect parking brake cable from shoe lever.
- Apply non-melting grease on brake backing plate shoe flats, then on shoe sliding surface.
- ...
CLICK HERE TO GET FULL ACCESS TO 2002 Toyota 4runner BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Toyota 4runner AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Toyota 4runner cars and light trucks from 1990+.
Power Brake Units -> Troubleshooting
Vehicle: 2002 Toyota 4runner 3.4 V6 GAS
Refer to "Hydraulic Brake Systems" ...
CLICK HERE TO GET FULL ACCESS TO 2002 Toyota 4runner BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Toyota 4runner AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Toyota 4runner cars and light trucks from 1990+.
Anti-lock Brakes -> System Service -> ABS Computer -> Brake Actuator -> Brake Lines -> Brake System Bleed -> Component Replacement -> Master Cylinder
Vehicle: 2002 Toyota 4runner 3.4 V6 GAS
Brake System Bleed
Master Cylinder
- Fill reservoir.
- Disconnect master cylinder tubes.
- Slowly depress brake pedal and hold.
- Block outlet holes with fingers and release pedal.
- Repeat 3-4 times.
Brake Lines
Bleed wheel with longest brake line first, then work your way back to the master cylinder according to brake line length.
- Connect brake cylinder tube.
- Depress pedal several times and hold.
- Loosen bleeder plug.
- When fluid stops coming out, tighten bleeder plug and release pedal.
- Repeat several times.
- Repeat entire procedure for each wheel.
- Fill reservoir.
Component Replacement
Brake Actuator
- Remove ...
CLICK HERE TO GET FULL ACCESS TO 2002 Toyota 4runner BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Toyota 4runner AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Toyota 4runner cars and light trucks from 1990+.
Drum Brakes -> Precautions -> Audio Coded Anti-Theft System
Vehicle: 2002 Toyota 4runner 3.4 V6 GAS
Audio Coded Anti-Theft System
Some models are equipped with an audio coded anti-theft system that will disable the radio when the battery cable is disconnected. The system can be identified by the "ANTI-THEFT SYSTEM" on the cassette tape lid. Obtain 3 digit customer code for input. Reset system after service as follows:
- Obtain 3 digit audio anti-theft code.
- Depress 1 (PROG) while depressing righthand side of TUNE SEEK button,- - - will appear in tape operation display.
- To enter the first digit, depress 1 (PROG) button repeatedly until number of times depressed equals first digit beginning...
CLICK HERE TO GET FULL ACCESS TO 2002 Toyota 4runner BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Toyota 4runner AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Toyota 4runner cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Caliper Service -> 2WD -> 4Runner -> Avalon, Camry, Camry Solara, Corolla, Celica, Highlander, MR2 & Sienna -> Echo & RAV4 -> Land Cruiser -> Overhaul -> Replace -> Sequoia & Tundra -> Supra -> T100 -> Tacoma -> Tercel
Vehicle: 2002 Toyota 4runner 3.4 V6 GAS
Avalon, Camry, Camry Solara, Corolla, Celica, Highlander, MR2 & Sienna
Replace
- Raise and support vehicle and remove front wheel.
- Remove union bolt and disconnect brake hose. Use suitable container to catch brake fluid.
- Remove caliper, Figs. through .
- Remove anti-squeal shims and brake pad wear indicator plates.
- Remove support plates.
- Reverse procedure to install.
Overhaul
- Remove caliper.
- Remove the following parts:
- Caliper slide bushings.
- Dust boots.
- Collars.
- Using screwdriver, remove caliper boot set ring and boot.
- Place suitable rag between caliper and piston and using compressed air, remov...
CLICK HERE TO GET FULL ACCESS TO 2002 Toyota 4runner BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Toyota 4runner AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Toyota 4runner cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> Except Land Cruiser & 4Runner -> Except Sienna -> Land Cruiser & 4Runner -> Master Cylinder -> Models w/Load Sensing Proportioning Valve (LSPV) -> Models w/Proportioning & Bypass Valve (P-BV) -> Proportioning Valve -> Sienna -> Wheel Cylinders
Vehicle: 2002 Toyota 4runner 3.4 V6 GAS
Master Cylinder
Except Sienna
- Remove brake fluid with syringe.
- On RAV4 models, remove air cleaner cover with air cleaner hose.
- On all models, label and disconnect brake lines using line wrench 09751-36011, 09023-00100, or equivalent. Cap brake lines from master cylinder.
- Disconnect wire connector from brake pressure switch and then disconnect level warning switch connector, if equipped.
- Remove master cylinder to brake unit attaching nuts, then remove master cylinder, wire clamp, gasket and 3-way union, as needed.
- Reverse procedure to install. Bleed brake system.
Sienna
- Remove air c...
CLICK HERE TO GET FULL ACCESS TO 2002 Toyota 4runner BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
