Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2000 Acura Integra car and truck
repair procedures including Acura engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2000 Acura Integra automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2000 Acura Integra
- 2000 Acura Integra TYPE-R 1.8 L4 GAS, CC:1797, Fuel Injection
- 2000 Acura Integra GS 1.8 L4 GAS, CC:1834, Fuel Injection
- 2000 Acura Integra GSR 1.8 L4 GAS, CC:1797, Fuel Injection
- 2000 Acura Integra LS 1.8 L4 GAS, CC:1834, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Acura Integra AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Acura Integra cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2000 Acura Integra TYPE-R 1.8 L4 GAS
Front
- Loosen wheel nuts slightly.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Drain transmission fluid, then reinstall drain plug using new washer. It is not required to remove drain plug when left driveshaft is removed.
- Lift up locking tab on spindle nut then remove nut.
- Remove self-locking nut with 12mm dampner fork mounting bolt. and 10mm dampner pinch bolt then remove dampner fork.
- Remove cotter pin from lower arm ball joint castle nut and remove nut then separate lower ball joint lower arm from using b...
CLICK HERE TO GET FULL ACCESS TO 2000 Acura Integra DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Acura Integra AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Acura Integra cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2000 Acura Integra LS 1.8 L4 GAS
Front
- Loosen wheel nuts slightly.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Drain transmission fluid, then reinstall drain plug using new washer. It is not required to remove drain plug when left driveshaft is removed.
- Lift up locking tab on spindle nut then remove nut.
- Remove self-locking nut with 12mm dampner fork mounting bolt. and 10mm dampner pinch bolt then remove dampner fork.
- Remove cotter pin from lower arm ball joint castle nut and remove nut then separate lower ball joint lower arm from using b...
CLICK HERE TO GET FULL ACCESS TO 2000 Acura Integra DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Acura Integra AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Acura Integra cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2000 Acura Integra GS 1.8 L4 GAS
Front
- Loosen wheel nuts slightly.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Drain transmission fluid, then reinstall drain plug using new washer. It is not required to remove drain plug when left driveshaft is removed.
- Lift up locking tab on spindle nut then remove nut.
- Remove self-locking nut with 12mm dampner fork mounting bolt. and 10mm dampner pinch bolt then remove dampner fork.
- Remove cotter pin from lower arm ball joint castle nut and remove nut then separate lower ball joint lower arm from using b...
CLICK HERE TO GET FULL ACCESS TO 2000 Acura Integra DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Acura Integra AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Acura Integra cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2000 Acura Integra GSR 1.8 L4 GAS
Front
- Loosen wheel nuts slightly.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Drain transmission fluid, then reinstall drain plug using new washer. It is not required to remove drain plug when left driveshaft is removed.
- Lift up locking tab on spindle nut then remove nut.
- Remove self-locking nut with 12mm dampner fork mounting bolt. and 10mm dampner pinch bolt then remove dampner fork.
- Remove cotter pin from lower arm ball joint castle nut and remove nut then separate lower ball joint lower arm from using b...
CLICK HERE TO GET FULL ACCESS TO 2000 Acura Integra DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
