INTERNATIONAL 7400 PROBLEMS | SAFETY RECALLS & DEFECTS

INTERNATIONAL 7400 PROBLEMS | SAFETY RECALLS & DEFECTS

Access the National Highway Traffic Safety database of INTERNATIONAL 7400 recalls and defective parts found on INTERNATIONAL 7400 automobiles. The National Highway Traffic Safety administration is authorized to order the INTERNATIONAL 7400 manufacturers to recall and repair vehicles or parts of motor vehicle equipment when its investigation indicates that they contain serious safety defects in their design, structure, body, or performance.

Most Recent Recalls For INTERNATIONAL 7400

Vehicle	Component	Manufacterer
2011 INTERNATIONAL 7400 STEERING:GEAR BOX:SHAFT SECTOR Recall
2011 INTERNATIONAL 7400	STEERING:GEAR BOX:SHAFT SECTOR Units affected: 46	NAVISTAR, INC Report Date: 2010-11-17
Summary: NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2011 INTERNATIONAL 7300, 7400, AND 7500 VEHICLES MANUFACTURED FROM JUNE 30, 2010, THROUGH OCTOBER 13, 2010. THESE VEHICLES WERE BUILT WITH AN INCORRECT STEERING SYSTEM DRAGLINK.
2011 INTERNATIONAL 7400 EXTERIOR LIGHTING:HEADLIGHTS Recall
2011 INTERNATIONAL 7400	EXTERIOR LIGHTING:HEADLIGHTS Units affected: 43	NAVISTAR, INC Report Date: 2010-10-05
Summary: NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2011 INTERNATIONAL 7300, 7400, 7500, VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108,DS"'LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE VEHICLES ARE INSTALLED WITH IMPROPER HEADLIGHT HEIGHT OF 55.5 INCHES AND THE CORRECT HEIGHT SHOULD BE 54 INCHES.
2009-2011 INTERNATIONAL 7400 ELECTRICAL SYSTEM:BATTERY Recall
2009-2011 INTERNATIONAL 7400	ELECTRICAL SYSTEM:BATTERY Units affected: 29460	NAVISTAR, INC Report Date: 2010-03-18
Summary: NAVISTAR HAS NOTIFIED NHTSA OF A DEFECT ON CERTAIN MODEL YEAR 2008-2011 INTERNATIONAL TRUCKS EQUIPPED WITH AN OPTIONAL JUMP START STUD. CORROSION AT THE BASE OF THE STUD MAY CAUSE AN ELECTRICAL SHORT BETWEEN THE STUD AND BATTERY BOX.
2009 INTERNATIONAL 7400 ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN Recall
2009 INTERNATIONAL 7400	ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN Units affected: 7521	NAVISTAR, INC Report Date: 2009-03-30
Summary: NAVISTAR IS RECALL 7,521 MY 2009 INTERNATIONAL MODEL TRUCKS AND MY 2009 AND 2010 IC SCHOOL AND TRANSIT BUSES MANUFACTURED FROM APRIL 1, 2008 TO DECEMBER 12, 2008, EQUIPPED WITH A HORTON 2-SPEED FAN DRIVE, IDENTIFIED BY FEATURE CODE 12THT. THE FASTENERS THAT CONNECT THE MAGNET BRACKETS TO THE AIR CHAMBER HOUSING OF THE 2-SPEED ENGINE FAN COULD FAIL RESULTING IN THE MAGNET BRACKET BEING THROWN FROM THE FAN DRIVE AND THE VEHICLE AT HIGH SPEED.
2006-2008 INTERNATIONAL 7400 ENGINE AND ENGINE COOLING Recall
2006-2008 INTERNATIONAL 7400	ENGINE AND ENGINE COOLING Units affected: 34993	INTERNATIONAL TRUCK & ENGINE CORPORATION Report Date: 2008-02-27
Summary: INTERNATIONAL IS RECALLING 34,993 MY 2006-2008 SCHOOL AND TRANSIT BUSES AND HEAVY DUTY TRUCKS/TRACTORS MANUFACTURED BETWEEN JUNE 1, 2006 AND JUNE 28, 2007, EQUIPPED WITH INTERNATIONAL DT466 OR DT570 ENGINES. THE BASE PLATE OF THE ENGINE OIL COOLER MAY CRACK ALLOWING PRESSURIZED OIL TO LEAK INTO THE ENGINE COMPARTMENT.
2006-2008 INTERNATIONAL 7400 PARKING BRAKE Recall
2006-2008 INTERNATIONAL 7400	PARKING BRAKE Units affected: 10882	INTERNATIONAL TRUCK & ENGINE CORPORATION Report Date: 2007-07-24
Summary: ON CERTAIN 6X4 OR 6X6 TRUCKS WITH AIR BRAKES OR TRACTORS WITH AIR BRAKES AND EQUIPPED WITH BENDIX SR-7 SPRING BRAKE MODULATING VALVES, THE INTERNAL RUBBER CHECK VALVE MAY LEAK CAUSING A DELAY IN THE APPLICATION OF THE SPRING BRAKES TO PARK THE VEHICLE AFTER THE OPERATOR PULLS THE DASH VALVE BUTTON.
2005-2007 INTERNATIONAL 7400 SUSPENSION:REAR:AXLE:SPINDLE Recall
2005-2007 INTERNATIONAL 7400	SUSPENSION:REAR:AXLE:SPINDLE Units affected: 230	INTERNATIONAL TRUCK & ENGINE CORPORATION Report Date: 2007-06-04
Summary: ON CERTAIN TRUCKS, THE REAR-REAR AXLE BRAKE SLACK ADJUSTERS MAY CONTACT THE REAR AXLE HOUSING PREVENTING THE BRAKES FROM BEING FULLY APPLIED POSSIBLY CAUSING EXTENDED STOPPING DISTANCES.
2007-2008 INTERNATIONAL 7400 SUSPENSION:REAR:AXLE:NON-POWERED AXLE ASSEMBLY Recall
2007-2008 INTERNATIONAL 7400	SUSPENSION:REAR:AXLE:NON-POWERED AXLE ASSEMBLY Units affected: 1172	INTERNATIONAL TRUCK & ENGINE CORPORATION Report Date: 2007-04-24
Summary: ON CERTAIN TRUCKS, ONE OR BOTH REAR AXLE HOUSINGS MAY CONTAIN THINNER MATERIAL THAN WHAT IS NECESSARY FOR NORMAL VEHICLE OPERATION. OVER TIME, THIS THINNER MATERIAL MAY RESULT IN A FATIGUE FAILURE OF THE REAR AXLE HOUSING, POSSIBLY IN THE LOCATION OF THE BRAKE FLANGE.
2007 INTERNATIONAL 7400 SUSPENSION Recall
2007 INTERNATIONAL 7400	SUSPENSION Units affected: 87	INTERNATIONAL TRUCK & ENGINE CORPORATION Report Date: 2006-10-11
Summary: ON CERTAIN TRUCKS EQUIPPED WITH CHALMERS REAR SUSPENSIONS, THE ADJUSTABLE TORQUE ROD END CASTINGS MAY BE BRITTLE. A BRITTLE ROD END CASTING MAY FRACTURE WITHOUT WARNING, CAUSING THE VEHICLES' REAR AXLES TO BECOME MISALIGNED.
2007 INTERNATIONAL 7400 PARKING BRAKE:CONVENTIONAL:AIR Recall
2007 INTERNATIONAL 7400	PARKING BRAKE:CONVENTIONAL:AIR Units affected: 1401	INTERNATIONAL TRUCK & ENGINE CORPORATION Report Date: 2006-06-28
Summary: ON CERTAIN TRUCKS EQUIPPED WITH SR-7 BENDIX BRAKE VALVES, THE CHECK VALVE INSIDE THE VALVE CAVITY MAY NOT PROPERLY SET, CAUSING INTERNAL AIR LEAKAGE. IF THE CHECK VALVE DOES NOT PROPERLY SEAT, THE RESULTING LEAKAGE CAN CAUSE A DELAY IN THE APPLICATION OF THE SPRING BRAKES TO PARK THE VEHICLE AFTER OPERATOR PULLS THE DASH VALVE BUTTON.