Auto Parts Search
2009 Nissan Murano CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Nissan REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Section
- Technical Service Bulletins
- Specifications
- Driveline, U-Joint & CV Axles Replacement
- Tire Pressure Monitoring System
- Starter & Alternator Replacement
- Cabin Air Filter Locations & Replacement
- Maintenance Lamp Reset
- Radiator & Hose Replacement
- Serpentine Belt Service
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Nissan Murano AUTOMOBILES
CV AXLE SHAFT, Replace -> Left Side -> Right Side
Vehicle: 2009 Nissan Murano SL 3.5 V6 GAS
Left Side
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front tire.
- Remove ABS wheel sensor from steering knuckle.
- Remove cotter pin and wheel bearing locknut. Discard old cotter pin and install new one upon installation
- Remove brake hose lock plate and remove hose from strut assembly.
- Remove strut assembly and steering knuckle bolt and nut.
- Remove driveshaft from steering knuckle. When removing driveshaft do not apply an excessive angle to driveshaft joint. Be careful not to excessively extend slide joint.
- Remove drivesh...
CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Murano DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Nissan Murano AUTOMOBILES
Description
Vehicle: 2009 Nissan Murano S 3.5 V6 GAS
The TPMS (Tire Pressure Monitor System) is controlled by the Body Control Module (BCM). The BCM receives its tire pressure signal from the remote keyless entry receiver. The remote keyless entry receiver receives i...
CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Murano TIRE PRESSURE MONITORING SYSTEM PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2009 Nissan Murano AUTOMOBILES
Starter, Replace
Vehicle: 2009 Nissan Murano SL 3.5 V6 GAS
- Disconnect battery ground and positive terminals.
- Remove air cleaner assembly and air ducts.
- Disconnect both ECM, TCM and IPDM E/R.
- Remove battery tray.
- Disconnect starter motor harness connect...
CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Murano STARTER & ALTERNATOR REPLACEMENT PROCEDURES
CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES FOR 2009 Nissan Murano AUTOMOBILES
Cabin Air Filter Service -> Nissan -> 2009 Maxima & Murano
Vehicle: 2009 Nissan Murano SL 3.5 V6 GAS
Under normal operating conditions the cabin air filter should be replaced every 12 months or 15,000 miles. In dusty areas change the cabin air filter more often.
- Push up and pull out on the cabin air filter access cover tab to remov...
CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Murano CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Nissan Murano AUTOMOBILES
Nissan -> Automatic Transmission Oil Temperature Warning Lamp ->
Vehicle: 2009 Nissan Murano LE 3.5 V6 GAS
This lamp will be illuminated when the automatic transmission fluid temperature is excessive. When...
CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Murano MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2009 Nissan Murano AUTOMOBILES
Radiator, Replace
Vehicle: 2009 Nissan Murano SL 3.5 V6 GAS
- Remove engine under cover.
- Remove righthand and lefthand radiator core support covers.
- Remove air duct (inlet).
- Remove front grille.
- Remove horn.
- Remove hood lock.
- Drain engine coolant from radiator into a suitable container.
- Disconnect reservoir tank hose from radiator pipe (upper).
- Disconnect CVT fluid cooler hoses from radiator. Install blind plug to avoid leakage of CVT fluid.
- Remove radiator cap adapter and each radiator hoses (upper) and radiator pipe (upper) assembly. Be care...
CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Murano RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 2009 Nissan Murano AUTOMOBILES
Serpentine Drive Belt, Replace
Vehicle: 2009 Nissan Murano S 3.5 V6 GAS
- Raise and support vehicle.
- Remove righthand front wheel and tire.
- Remove righthand splash guard.
- Hold hexagonal part in center of drive belt auto-tensioner pulley with a box wrench securely. Then move wrench handle in a clockwise direction (loosening direction of drive belt). Avoid placing hand in a location where pinching may occur if holding tool accidentally comes off. Never loosen hexagonal ...
CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Murano SERPENTINE BELT SERVICE PROCEDURES
TECHNICAL SERVICE BULLETINS FOR 2009 Nissan Murano AUTOMOBILES
OEM TSB listings for most 2009 Nissan Murano cars and light trucks sold in the U.S. from 1985+.
Document: A/C SYSTEM O-RING SEAL LEAKS Vehicle: 2009 Nissan Murano S 3.5 V6 GAS Auto Systems: |
Document: POWER WINDOW AUTO UP INITIALIZATION Vehicle: 2009 Nissan Murano S 3.5 V6 GAS Auto Systems: |
CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Murano TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR 2009 Nissan Murano AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 2009 Nissan Murano cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 2009 Nissan Murano cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 2009 Nissan Murano cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 2009 Nissan Murano cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Murano SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2009 Nissan Murano vehicle. |
Access the Complete guide! |