Auto Parts Search
2006 Infiniti M45 CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Infiniti REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Section
- Component Locations
- Wiring Diagrams
- Technical Service Bulletins
- Specifications
- Fuel Filter Replacement
- Driveline, U-Joint & CV Axles Replacement
- Tire Pressure Monitoring System
- Starter & Alternator Replacement
- Cabin Air Filter Locations & Replacement
- Maintenance Lamp Reset
- Radiator & Hose Replacement
- Serpentine Belt Service
FUEL FILTER REPLACEMENT PROCEDURES FOR 2006 Infiniti M45 AUTOMOBILES
Infiniti -> Fuel Filter Replacement -> All Models -> Fuel System Pressure Relief -> Removal & Installation
Vehicle: 2006 Infiniti M45 4.5 V8 GAS
Do not smoke or allow an open flame of any type when working on or near any fuel system related components. The highly flammable vapor mixtures may ignite, resulting in serious personal injury.
Prior to disconnecting fuel lines, the fuel system pressure must be relieved to prevent accidental spray of fuel.
After the battery has been disconnected and reconnected, some abnormal driveabilty symptoms may occur. The vehicle may need to be driven 10...
CLICK HERE TO GET FULL ACCESS TO 2006 Infiniti M45 FUEL FILTER REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2006 Infiniti M45 AUTOMOBILES
DRIVESHAFT, Replace
Vehicle: 2006 Infiniti M45 4.5 V8 GAS
- Place vehicle in neutral and release parking brake.
- Raise vehicle off ground and support it with safety stands in proper locations.
- Remove exhaust front tube and center muffler.
- Remove floor reinforcement.
- Loosen center bearing bracket nuts. Do not remove center bearing bracket nuts.
- Mark companion flange on front drive. Its recommended to use paint for reference...
CLICK HERE TO GET FULL ACCESS TO 2006 Infiniti M45 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2006 Infiniti M45 AUTOMOBILES
Component Replacement -> Installation -> Removal -> Tire Pressure Sensor -> TPMS Control Unit -> TPMS Receiver
Vehicle: 2006 Infiniti M45 4.5 V8 GAS
Tire Pressure Sensor
Removal
- Deflate tire, then remove retaining nut an allow sensor to fall into tire.
- Gently bounce tire so sensor falls to bottom of tire.
- Place tire on suitable tire changing machine and break both tire beads. Ensure sensor remains at bottom of tire.
- Turn tire so valve hole is at bottom, then bounce tire so sensor is near valve hole.
- Lift tire onto turntable and position tire valve stem hole 270° from mounting/dismounting head, Fig. .
- Lubricate tire, then remove first side of tire.
- Reach inside of tire and remove sensor, Fig. .
- Remove second side of tire.
Install...
CLICK HERE TO GET FULL ACCESS TO 2006 Infiniti M45 TIRE PRESSURE MONITORING SYSTEM PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2006 Infiniti M45 AUTOMOBILES
Alternator, Replace
Vehicle: 2006 Infiniti M45 Sport 4.5 V8 GAS
- Disconnect battery ground cable.
- On models equipped with AWD, remove power steering oil reservoir tank from bracket.
- Remove wiring harness clip for power steering oil pressure sensor.
- On all models, raise vehicle on lift.
- Remove bolts for engine front undercover then remove undercover.
- Remove alternator and power steering oil pump belts by loosening idler pulley lock nut. Upon installation adjust belt tension by turning adjusting bolt. Inspect belt tension using a suitable belt tension gauge. Used belt tension 18 lbs., and new belt tension 15 lbs.
- Remove drive b...
CLICK HERE TO GET FULL ACCESS TO 2006 Infiniti M45 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES FOR 2006 Infiniti M45 AUTOMOBILES
Cabin Air Filter Service -> Infiniti -> 2006-09 M35 & M45
Vehicle: 2006 Infiniti M45 Sport 4.5 V8 GAS
Under normal operating conditions the cabin air filter should be replaced every 12 months or 15,000 miles. In dusty areas change the cabin air filter more often.
- Open the glove compartment.
- Remove the glove compartment damper pin from the lefthand side, Fig. .
- Remove the passenger side instrument panel lower cover, then the side cover, Fig. .
- Remove the glove compartment retainers, then disconnect the electrical connectors and remove the glove compartment.
- Remove ...
CLICK HERE TO GET FULL ACCESS TO 2006 Infiniti M45 CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Infiniti M45 AUTOMOBILES
Infiniti -> Tire Pressure Monitoring System (TPMS) Warning Indicator -> 2003-09 M45 -> Activation -> ID Registration -> Less Activation Tool -> Relearn -> Reset -> With Activation Tool
Vehicle: 2006 Infiniti M45 4.5 V8 GAS
Reset
The Low Tire Pressure Warning lamp will illuminate for approximately one second as a bulb check when the ignition switch is placed in the on position. This system uses radio frequency pressure sensors which monitor pressure in all 4 tires. When operating the vehicle at a speed above 20 mph the Low Tire Pressure Warning Lamp will illuminate when low tire pressure has been detected. Adjusting tires to correct pressure will turn lamp off.
Relearn
Activation
The activation procedure must be performed after replacing or rotating tire and wheels, replacing tire pressure sensor or BCM.
- Wi...
CLICK HERE TO GET FULL ACCESS TO 2006 Infiniti M45 MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2006 Infiniti M45 AUTOMOBILES
Radiator, Replace
Vehicle: 2006 Infiniti M45 Sport 4.5 V8 GAS
Do not remove radiator cap when engine is hot. Serious burns could occur from high-pressure engine coolant escaping from thermostat housing.
- Wrap a thick cloth around radiator cap. Slowly turn it a quarter of a turn to release built-up pressure. Carefully remove radiator cap by turning it all way.
- Remove following parts:
- Front engine undercover.
- Engine room cover (righthand and lefthand).
- Air duct (inlet) and air cleaner case assembly.
- Remove front grille and front grille support.
- Drain engine coolant into a suitable container.
- Do not spill engine coolant on drive belts.
- On models wit...
CLICK HERE TO GET FULL ACCESS TO 2006 Infiniti M45 RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 2006 Infiniti M45 AUTOMOBILES
Serpentine Drive Belt, Replace
Vehicle: 2006 Infiniti M45 Sport 4.5 V8 GAS
- Remove air duct inlet assembly and place it aside.
- Rotate or lift belt tensioner arm counterclockwise, using a suitable tool to relieve tension from drive belt. Do not rotate belt tensioner cloc...
CLICK HERE TO GET FULL ACCESS TO 2006 Infiniti M45 SERPENTINE BELT SERVICE PROCEDURES
COMPONENT LOCATION DIAGRAMS FOR 2006 Infiniti M45 AUTOMOBILES
Component location diagrams for most 2006 Infiniti M45 cars and light trucks sold in the U.S. from 1990+.
Front Door Harness Diagram for 2006 Infiniti M45 4.5 V8 GAS Components on diagram: |
Roof Diagram for 2006 Infiniti M45 4.5 V8 GAS Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO 2006 Infiniti M45 PARTS/COMPONENTS LOCATION DIAGRAMS!
WIRING DIAGRAMS FOR 2006 Infiniti M45 AUTOMOBILES
OEM drawn wiring diagrams for most 2006 Infiniti M45 cars and light trucks sold in the U.S.
2006 Infiniti M45 4.5 V8 GAS Wiring Diagram Components on diagram: |
2006 Infiniti M45 Sport 4.5 V8 GAS Wiring Diagram Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO 2006 Infiniti M45 WIRING DIAGRAMS!
TECHNICAL SERVICE BULLETINS FOR 2006 Infiniti M45 AUTOMOBILES
OEM TSB listings for most 2006 Infiniti M45 cars and light trucks sold in the U.S. from 1985+.
Document: INTELLIGENT KEY BATTERY REPLACEMENT AND BATTERY DISCHARGE INDICATOR RESET Vehicle: 2006 Infiniti M45 4.5 V8 GAS Auto Systems: |
Document: A/C System O-Ring Seal Leaks Vehicle: 2006 Infiniti M45 4.5 V8 GAS Auto Systems: |
CLICK HERE TO GET FULL ACCESS TO 2006 Infiniti M45 TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR 2006 Infiniti M45 AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 2006 Infiniti M45 cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 2006 Infiniti M45 cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 2006 Infiniti M45 cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 2006 Infiniti M45 cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO 2006 Infiniti M45 SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2006 Infiniti M45 vehicle. |
Access the Complete guide! |