ISUZU HOMBRE PROBLEMS | SAFETY RECALLS & DEFECTS

ISUZU HOMBRE PROBLEMS | SAFETY RECALLS & DEFECTS

Access the National Highway Traffic Safety database of ISUZU HOMBRE recalls and defective parts found on ISUZU HOMBRE automobiles. The National Highway Traffic Safety administration is authorized to order the ISUZU HOMBRE manufacturers to recall and repair vehicles or parts of motor vehicle equipment when its investigation indicates that they contain serious safety defects in their design, structure, body, or performance.

Select Your Vehicle Year (Change Vehicle)

2000

1998

1997

1996

Most Recent Recalls For ISUZU HOMBRE

Vehicle	Component	Manufacterer
1996-1997 ISUZU HOMBRE VISIBILITY:REAR WINDOW WIPER/WASHER:MOTOR Recall
1996-1997 ISUZU HOMBRE	VISIBILITY:REAR WINDOW WIPER/WASHER:MOTOR Units affected: 14860	ISUZU MOTORS LIMITED Report Date: 2003-06-02
Summary: ON CERTAIN PICKUP TRUCKS WITH CERTAIN MODEL-ENGINE COMBINATIONS, THE WINDSHIELD WIPER MOTOR MAY FAIL DUE TO CRACKED SOLDER JOINTS ON THE CONTROLLER CIRCUIT BOARD. THE WINDSHIELD WIPERS COULD WORK INTERMITTENTLY OR NOT AT ALL.
2000 ISUZU HOMBRE EQUIPMENT:OTHER:LABELS Recall
2000 ISUZU HOMBRE	EQUIPMENT:OTHER:LABELS Units affected: 3672	ISUZU MOTORS LIMITED Report Date: 2000-09-08
Summary: VEHICLE DESCRIPTION: LIGHT DUTY PICKUP TRUCKS AND SPORT UTILITY VEHICLES. SOME OF THESE VEHICLES WERE BUILT WITH INCORRECT PAYLOAD INFORMATION ON THE VEHICLE CERTIFICATION LABEL. THE PAYLOAD SHOWN ON THE LABEL IS GREATER THAN THE MAXIMUM VALIDATED PAYLOAD. IF THE VEHICLE WERE LOADED TO THE INCORRECTLY LABELED PAYLOAD, IT MAY NOT RIDE AND HANDLE IN THE MANNER THAT THE DRIVER EXPECTS.
1996 ISUZU HOMBRE VISIBILITY:WINDSHIELD WIPER/WASHER Recall
1996 ISUZU HOMBRE	VISIBILITY:WINDSHIELD WIPER/WASHER Units affected: 8925	ISUZU MOTORS LIMITED Report Date: 1998-07-01
Summary: VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES, 2 AND 4-WHEEL DRIVE. SOLDER JOINTS NEAR THE WIRING HARNESS CONNECTOR CAN CRACK CAUSING THE WINDSHIELD WIPERS TO WORK INTERMITTENTLY.
1998 ISUZU HOMBRE ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD Recall
1998 ISUZU HOMBRE	ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD Units affected: 1299	ISUZU MOTORS LIMITED Report Date: 1997-11-25
Summary: VEHICLE DESCRIPTION: LIGHT DUTY PICKUP TRUCKS AND MULTI-PURPOSE VEHICLES. AN ENGINE ELECTRICAL WIRING-HARNESS CLIP CAN MELT AND DRIP ONTO THE EXHAUST MANIFOLD.
1997 ISUZU HOMBRE SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS Recall
1997 ISUZU HOMBRE	SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS Units affected: 684	ISUZU MOTORS LIMITED Report Date: 1997-09-11
Summary: VEHICLE DESCRIPTION: LIGHT DUTY PASSENGER PICKUP TRUCKS EQUIPPED WITH 4.3L ENGINES. THE FRONT BRAKE LINE CAN CONTACT THE LEFT-HAND SIDE OF THE ENGINE OIL PAN CAUSING THE BRAKE LINE TO WEAR TO THE POINT OF BRAKE FLUID LOSS DURING BRAKE APPLICATION.
1997 ISUZU HOMBRE SEAT BELTS Recall
1997 ISUZU HOMBRE	SEAT BELTS Units affected: 3106	ISUZU MOTORS LIMITED Report Date: 1997-06-12
Summary: VEHICLE DESCRIPTION: EXTENDED CAB PICKUP TRUCKS EQUIPPED WITH 60/40 FRONT BENCH SEATS AND EXTENDED CAB PICKUP TRUCKS AND 2-DOOR UTILITY VEHICLES EQUIPPED WITH MANUAL LOCKING RECLINER BUCKET SEATS. THE OUTBOARD SAFETY BELT WEBBING ON THE DRIVER'S AND/OR PASSENGER'S SEAT CAN SEPARATE DURING A FRONTAL IMPACT.
1996 ISUZU HOMBRE VISIBILITY:WINDSHIELD Recall
1996 ISUZU HOMBRE	VISIBILITY:WINDSHIELD Units affected: 8	ISUZU MOTORS LIMITED Report Date: 1997-01-29
Summary: THE TOP COAT PAINT SEVERELY PEELS DUE TO OVERBAKING OF THE POWDER PRIMER PRIOR TO THE TOP COAT APPLICATION. SINCE THE WINDSHIELD PRIMER AND ADHESIVE ADHERE TO THE TOP COAT PAINT ONTHE WINDSHIELD OPENING FLANGE, THE WINDSHIELD DOES NOT COMPLY WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 212, "WINDSHIELD MOUNTING."
1996 ISUZU HOMBRE EXTERIOR LIGHTING:HEADLIGHTS Recall
1996 ISUZU HOMBRE	EXTERIOR LIGHTING:HEADLIGHTS Units affected: 1547	ISUZU MOTORS LIMITED Report Date: 1996-04-03
Summary: A BRAZILIAN DOMESTIC HEADLAMP WAS INADVERTENTLY INSTALLED ON THESE VEHICLES INSTEAD OF THE REQUIRED U.S. DOMESTIC ASSEMBLY. THIS DOES NOT MEET THE REQUIREMENTS OF FMVSS NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."