| Most Recent Recalls For ISUZU FTR |
| Vehicle | Component | Manufacterer |
2006 ISUZU FTR PARKING BRAKE:CONVENTIONAL:AIR Recall
|
| 2006 ISUZU FTR | PARKING BRAKE:CONVENTIONAL:AIR
Units affected: 1184 | GENERAL MOTORS CORP.
Report Date: 2006-07-13 |
| Summary: CERTAIN MEDIUM DUTY TRUCKS EQUIPPED SR-7 BENDIX BRAKE VALVES, THE CHECK VALVE INSIDE THE VALVE CAVITY MAY NOT PROPERLY SET, CAUSING INTERNAL AIR LEAKAGE. IF THE CHECK VALVE DOES NOT PROPERLY SEAT, THE RESULTING LEAKAGE CAN CAUSE A DELAY IN THE APPLICATION OF THE SPRING BRAKES TO PARK THE VEHICLE AFTER OPERATOR PULLS THE DASH VALVE BUTTON. |  |
|
1999-2000 ISUZU FTR POWER TRAIN:CLUTCH ASSEMBLY Recall
|
| 1999-2000 ISUZU FTR | POWER TRAIN:CLUTCH ASSEMBLY
Units affected: 1368 | ISUZU MOTORS LIMITED
Report Date: 2002-02-12 |
| Summary: CERTAIN MEDIUM DUTY TILT CAB TRUCKS EQUIPPED WITH MANUAL TRANSMISSIONS HAVE A CONDITION IN WHICH THE CLUTCH MASTER-CYLINDER PUSHROD END THAT ATTACHES TO THE CLUTCH PEDAL PIN CAN WEAR PREMATURELY. THE FIRST NOTICEABLE EFFECT OF THIS WEAR COULD BE THE CLUTCH PEDAL NOT RETURNING COMPLETELY TO THE FULL-UP POSITION. | |
|
1999-2000 ISUZU FTR STEERING:LINKAGES:TIE ROD ASSEMBLY Recall
|
| 1999-2000 ISUZU FTR | STEERING:LINKAGES:TIE ROD ASSEMBLY
Units affected: 203 | ISUZU MOTORS LIMITED
Report Date: 2001-06-15 |
| Summary: VEHICLE DESCRIPTION: COMMERCIAL VEHICLES EQUIPPED WITH TIE ROD ASSEMBLIES CONTAINING 24-DL MODEL BALL SOCKETS AND MANUFACTURED BY TRW. CERTAIN OF THE TIE ROD BALL-SOCKET BEARINGS HAVE A BELOW-SPECIFICATION CASE DEPTH AND/OR HARDNESS, WHICH CAN LEAD TO PREMATURE WEAR OF THE SOCKET. | |
|
1999-2000 ISUZU FTR STEERING:LINKAGES:LINK:DRAG:CONNECTION Recall
|
| 1999-2000 ISUZU FTR | STEERING:LINKAGES:LINK:DRAG:CONNECTION
Units affected: 203 | ISUZU MOTORS LIMITED
Report Date: 2001-06-15 |
| Summary: VEHICLE DESCRIPTION: COMMERCIAL VEHICLES EQUIPPED WITH AXLE ASSEMBLIES WHICH MAY HAVE BEEN MANUFACTURED WITH TRW MODEL 20EDL BALL SOCKETS/DRAG LINKS. THE TIE ROD BALL-SOCKET BEARINGS HAVE A BELOW SPECIFICATION CASE DEPTH AND/OR HARDNESS WHICH CAN LEAD TO PREMATURE WEAR OUT OF THE SOCKET IN SOME APPLICATIONS. | |
|
1991 ISUZU FTR POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT Recall
|
| 1991 ISUZU FTR | POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT
Units affected: 324 | ISUZU MOTORS LIMITED
Report Date: 1991-02-15 |
| Summary: BEARINGS USED IN THE REAR AXLE HUBS ON THESE VEHICLES ARE IMPROPERLY MACHINED; BEARING COULD SEIZE AT LOW MILEAGES BEFORE SUFFICIENT RUN IN IS ACHIEVED. | |
|
