| Most Recent Recalls For ISUZU AMIGO |
| Vehicle | Component | Manufacterer |
1994 ISUZU AMIGO SEAT BELTS:FRONT:BUCKLE ASSEMBLY Recall
|
| 1994 ISUZU AMIGO | SEAT BELTS:FRONT:BUCKLE ASSEMBLY
Units affected: 14449 | ISUZU MOTORS LIMITED
Report Date: 2002-10-15 |
| Summary: ON CERTAIN SPORT UTILITY VEHICLES AND PICKUP TRUCKS, THE LATCH PLATE USED IN THE SEAT BELT BUCKLE WAS NOT MANUFACTURED ACCORDING TO DESIGN DIMENSIONS. IF THE SEAT BELT TONGUE IS INSERTED SLOWLY AT AN ANGLE INTO THE BUCKLE, THERE IS A POSSIBILITY OF PARTIAL ENGAGEMENT. |  |
|
1998-1999 ISUZU AMIGO SUSPENSION:REAR Recall
|
| 1998-1999 ISUZU AMIGO | SUSPENSION:REAR
Units affected: 213736 | ISUZU MOTORS LIMITED
Report Date: 2000-03-02 |
| Summary: VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. PAINT WAS APPLIED UNEVENLY ON THE REAR AXLES, RESULTING IN INSUFFICIENT PAINT HARDNESS. SHOULD THIS OCCUR ON THE SURFACE THAT CONTACTS THE REAR AXLE LOWER LINK BRACKET BOLT HEAD AND/OR NUT, THE NUT MAY LOOSEN. | |
|
1998 ISUZU AMIGO VISIBILITY:SUN ROOF ASSEMBLY Recall
|
| 1998 ISUZU AMIGO | VISIBILITY:SUN ROOF ASSEMBLY
Units affected: 9377 | ISUZU MOTORS LIMITED
Report Date: 1998-10-20 |
| Summary: VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH A SUNROOF SUNSHADE. THE PRIMER APPLIED TO PREPARE THE SURFACE PRIOR TO BONDING THE SUNSHADE HOLDERS TO THE SUNROOF WEAKENED THE BONDING STRENGTH OF THE ADHESIVE, RESULTING IN AN UNSATISFACTORY BOND OF THE HOLDER TO THE SUNROOF. | |
|
1998 ISUZU AMIGO ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD Recall
|
| 1998 ISUZU AMIGO | ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD
Units affected: 55475 | ISUZU MOTORS LIMITED
Report Date: 1998-07-24 |
| Summary: VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. A GROUND CONNECTION TERMINAL WAS NOT PROPERLY CRIMPED IN THE SUPPLIER'S ENGINE WIRING HARNESS MANUFACTURING LINE. THIS IMPROPER CRIMPING PROCESS CAN LEAVE AN IMPRESSION ON THE TERMINAL THAT WILL EVENTUALLY CAUSE A STRESS FRACTURE. S | |
|
1998 ISUZU AMIGO SEAT BELTS:FRONT:ANCHORAGE Recall
|
| 1998 ISUZU AMIGO | SEAT BELTS:FRONT:ANCHORAGE
Units affected: 3044 | ISUZU MOTORS LIMITED
Report Date: 1998-05-26 |
| Summary: VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THE STRENGTH OF THE REAR SEAT BELT SHOULDER ANCHORAGE IS NOT TO DESIGN SPECIFICATIONS AND DOES NOT FULLY COMPLY WITH REQUIREMENTS OF FMVSS NO. 210, "SEAT BELT ASSEMBLY ANCHORAGES." | |
|
1994 ISUZU AMIGO SEAT BELTS:FRONT:BUCKLE ASSEMBLY Recall
|
| 1994 ISUZU AMIGO | SEAT BELTS:FRONT:BUCKLE ASSEMBLY
Units affected: 36075 | ISUZU MOTORS LIMITED
Report Date: 1996-09-17 |
| Summary: THE LATCH PLATE USED IN THE SEAT BELT BUCKLE WAS NOT MANUFACTURED ACCORDING TO DESIGN DIMENSIONS. IF THE SEAT BELT TONGUE IS INSERTED SLOWLY AT AN ANGLE INTO THE BUCKLE, THERE IS A POSSIBILITY OF PARTIAL ENGAGEMENT. | |
|
