| Most Recent Recalls For INTERNATIONAL HARVESTER 1800 |
| Vehicle | Component | Manufacterer |
| 1977-1978 INTERNATIONAL HARVESTER 1800 SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES Recall |
| 1977-1978 INTERNATIONAL HARVESTER 1800 | SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES
Units affected: 350 | INTERNATIONAL HARVESTER
Report Date: 1981-10-22 |
| Summary: THE PUSHROD MAY HAVE BEEN INCORRECTLY MOUNTED TO THE LOWER OF TWO HOLES IN THE BRAKE PEDAL ASSEMBLY. INCORRECT MOUNTING CAN CAUSE SIDELOAD FORCES TO BE APPLIED TO THE PUSHROD, CAUSING THE PUSHROD TO FRACTURE. |  |
|
| 1978-1979 INTERNATIONAL HARVESTER 1800 VISIBILITY:WINDSHIELD Recall |
| 1978-1979 INTERNATIONAL HARVESTER 1800 | VISIBILITY:WINDSHIELD
Units affected: 3000 | INTERNATIONAL HARVESTER
Report Date: 1979-06-19 |
| Summary: THE OPENING FOR THE WINDSHIELD IN THE CAB MAY BE TOO LARGE TO PERMIT PROPER RETENTION OR SEALING OF THE WINDSHIELD. | |
|
| 1978-1979 INTERNATIONAL HARVESTER 1800 SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER Recall |
| 1978-1979 INTERNATIONAL HARVESTER 1800 | SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER
Units affected: 667 | INTERNATIONAL HARVESTER
Report Date: 1979-04-16 |
| Summary: DEFECTIVE BOLTS MAY HAVE BEEN USED TO MOUNT THE BRAKE MASTER CYLINDER TO THE CAB FIREWALL, RESULTING IN BOLT FRACTURE. FRACTURE OF ALL THE MASTER CYLINDER MOUNTING BOLTS WOULD ALLOW SEPARATION OF THE MASTER CYLINDER FROM ITS MOUNTING. | |
|
| 1978-1979 INTERNATIONAL HARVESTER 1800 SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER Recall |
| 1978-1979 INTERNATIONAL HARVESTER 1800 | SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER
Units affected: 113 | INTERNATIONAL HARVESTER
Report Date: 1979-04-02 |
| Summary: INCORRECT BOLTS MAY HAVE BEEN USED TO MOUNT THE MASTER CYLINDER TO THE BRAKE BOOSTER UNIT. THE BOLTS COULD BREAK AND ALLOW SEPARATION OF THE MASTER CYLINDER FROM ITS MOUNTING. | |
|
| 1978-1979 INTERNATIONAL HARVESTER 1800 STEERING:WHEEL AND HANDLE BAR Recall |
| 1978-1979 INTERNATIONAL HARVESTER 1800 | STEERING:WHEEL AND HANDLE BAR
Units affected: 9375 | INTERNATIONAL HARVESTER
Report Date: 1979-01-19 |
| Summary: THE DEFECT IS INSECURE CLAMPING OF THE STEERING COLUMN COUPLING TO THE STEERING GEAR INPUT SHAFT DUE TO CLAMP FAILURE. THE CLAMP WAS IMPROPERLY HEAT-TREATED AND MAY BE DEFORMED OR FRACTURED. INSECURE CLAMPING CAN CAUSE WEAR AND PROGRESSIVE LOOSENESS, WHICH IF NOT DETECTED OR NOT PROMPTLY REPAIRED COULD PROGRESS UNTIL SERRATIONS OF SHAFT AND/OR INTERNAL SPLINE TEETH OF COUPLING BECOME STRIPPED. | |
|
| 1978 INTERNATIONAL HARVESTER 1800 SERVICE BRAKES, AIR:SUPPLY:HOSES, LINES/PIPING, AND FITTINGS Recall |
| 1978 INTERNATIONAL HARVESTER 1800 | SERVICE BRAKES, AIR:SUPPLY:HOSES, LINES/PIPING, AND FITTINGS
Units affected: 750 | INTERNATIONAL HARVESTER
Report Date: 1978-12-04 |
| Summary: THE AIR SUPPLY LINES FROM THE PRIMARY AND SECONDARY AIR TANKS TO THE AIR BRAKE APPLICATION (FOOT) VALVE MAY HAVE BEEN INSTALLED IN REVERSE. IN THE EVENT OF AIR LOSS FAILURE IN THE PRIMARY SYSTEM, TOTAL LOSS OF SERVICE BRAKES COULD OCCUR. | |
|
| 1974 INTERNATIONAL HARVESTER 1800 SERVICE BRAKES, HYDRAULIC:POWER ASSIST:VACUUM:HOSES, LINES/PIPING, AND FITTINGS Recall |
| 1974 INTERNATIONAL HARVESTER 1800 | SERVICE BRAKES, HYDRAULIC:POWER ASSIST:VACUUM:HOSES, LINES/PIPING, AND FITTINGS
Units affected: 7980 | NAVISTAR INTL CORP.
Report Date: 1974-09-16 |
| Summary: | |
|
| 1970-1971 INTERNATIONAL HARVESTER 1800 SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM Recall |
| 1970-1971 INTERNATIONAL HARVESTER 1800 | SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM
Units affected: 400 | NAVISTAR INTL CORP.
Report Date: 1973-03-21 |
| Summary: | |
|
