| Most Recent Recalls For INTERNATIONAL 7300 |
| Vehicle | Component | Manufacterer |
| 2007-2008 INTERNATIONAL 7300 ENGINE AND ENGINE COOLING Recall |
| 2007-2008 INTERNATIONAL 7300 | ENGINE AND ENGINE COOLING
Units affected: 34993 | INTERNATIONAL TRUCK & ENGINE CORPORATION
Report Date: 2008-02-27 |
| Summary: INTERNATIONAL IS RECALLING 34,993 MY 2006-2008 SCHOOL AND TRANSIT BUSES AND HEAVY DUTY TRUCKS/TRACTORS MANUFACTURED BETWEEN JUNE 1, 2006 AND JUNE 28, 2007, EQUIPPED WITH INTERNATIONAL DT466 OR DT570 ENGINES. THE BASE PLATE OF THE ENGINE OIL COOLER MAY CRACK ALLOWING PRESSURIZED OIL TO LEAK INTO THE ENGINE COMPARTMENT. |  |
|
| 2007-2008 INTERNATIONAL 7300 SUSPENSION:REAR:AXLE:NON-POWERED AXLE ASSEMBLY Recall |
| 2007-2008 INTERNATIONAL 7300 | SUSPENSION:REAR:AXLE:NON-POWERED AXLE ASSEMBLY
Units affected: 1172 | INTERNATIONAL TRUCK & ENGINE CORPORATION
Report Date: 2007-04-24 |
| Summary: ON CERTAIN TRUCKS, ONE OR BOTH REAR AXLE HOUSINGS MAY CONTAIN THINNER MATERIAL THAN WHAT IS NECESSARY FOR NORMAL VEHICLE OPERATION. OVER TIME, THIS THINNER MATERIAL MAY RESULT IN A FATIGUE FAILURE OF THE REAR AXLE HOUSING, POSSIBLY IN THE LOCATION OF THE BRAKE FLANGE. | |
|
| 2004-2005 INTERNATIONAL 7300 STRUCTURE Recall |
| 2004-2005 INTERNATIONAL 7300 | STRUCTURE
Units affected: 17443 | INTERNATIONAL TRUCK & ENGINE CORPORATION
Report Date: 2004-12-03 |
| Summary: ON CERTAIN TRUCKS, THE BOLTS THAT MOUNT THE FRONT OF THE CAB TO THE MOUNTING BRACKETS WERE NOT PROPERLY TORQUED AT THE MANUFACTURING PLANT. | |
|
| 2001-2004 INTERNATIONAL 7300 ELECTRICAL SYSTEM:BATTERY:CABLES Recall |
| 2001-2004 INTERNATIONAL 7300 | ELECTRICAL SYSTEM:BATTERY:CABLES
Units affected: 18545 | INTERNATIONAL TRUCK & ENGINE CORPORATION
Report Date: 2004-06-30 |
| Summary: ON CERTAIN HEAVY DUTY TRUCKS EQUIPPED WITH INTERNATIONAL DT530, CUMMINS, OR CATERPILLAR I-6 ENGINES, THE POSITIVE BATTERY CABLE BETWEEN THE BATTERIES AND THE STARTER MAY RUB AGAINST AN ELECTRICAL GROUND CABLE BETWEEN THE STARTER AND FRAME RAIL. | |
|
| 2004 INTERNATIONAL 7300 SEAT BELTS:FRONT:BUCKLE ASSEMBLY Recall |
| 2004 INTERNATIONAL 7300 | SEAT BELTS:FRONT:BUCKLE ASSEMBLY
Units affected: 1687 | INTERNATIONAL TRUCK & ENGINE CORPORATION
Report Date: 2004-04-22 |
| Summary: CERTAIN TRUCKS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 209, "SEAT BELT ASSEMBLIES." THE SEAT BELT LATCH FAILED A QUALITY REVIEW. | |
|
| 2001-2004 INTERNATIONAL 7300 POWER TRAIN:DRIVELINE:UNIVERSAL JOINT Recall |
| 2001-2004 INTERNATIONAL 7300 | POWER TRAIN:DRIVELINE:UNIVERSAL JOINT
Units affected: 2021 | INTERNATIONAL TRUCK & ENGINE CORPORATION
Report Date: 2004-03-22 |
| Summary: ON CERTAIN TRUCKS EQUIPPED WITH DT466 OR DT530 1308 STYLE ENGINES AND 4X4 OR 6X6 CAPABILITY, THE UNIVERSAL JOINT BETWEEN THE FRONT DRIVE SHAFT AND DRIVE AXLE COULD COME IN CONTACT WITH THE ENGINE OIL FILTER UNDER CERTAIN BRAKING CONDITIONS. | |
|
| 2001-2002 INTERNATIONAL 7300 VISIBILITY:WINDSHIELD WIPER/WASHER Recall |
| 2001-2002 INTERNATIONAL 7300 | VISIBILITY:WINDSHIELD WIPER/WASHER
Units affected: 15354 | INTERNATIONAL TRUCK & ENGINE CORPORATION
Report Date: 2003-04-29 |
| Summary: CERTAIN HEAVY DUTY TRUCKS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 104, ¬WINDSHIELD WIPING AND WASHING SYSTEMS.¬ DUE TO THE DESIGN OF THE WINDSHIELD WASHER PUMP MOTOR CIRCUIT, THE SYSTEM¬S ABILITY TO FUNCTION IS IMPAIRED WHEN IT IS FULL OF FROZEN WATER AND THE PUMP MOTOR SHAFT IS LOCKED OR FROZEN (CANNOT ROTATE). | |
|
| 2002-2003 INTERNATIONAL 7300 FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS Recall |
| 2002-2003 INTERNATIONAL 7300 | FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
Units affected: 1066 | INTERNATIONAL TRUCK AND ENGINE
Report Date: 2002-07-26 |
| Summary: ON CERTAIN HEAVY DUTY TRUCKS, THE FUEL LINE IS ROUTED TOO CLOSE TO A TURBO CHARGER OUTLET/EXHAUST PIPE. IF AN INTERFERENCE CONDITION OCCURS BETWEEN THE FUEL HARNESS AND THE EXHAUST PIPE, THE FUEL LINE INSIDE THE REFLECTIVE HEAT WRAP COULD MELT DUE TO EXCESSIVE HEAT. | |
|
