INFINITI QX56 PROBLEMS | SAFETY RECALLS & DEFECTS

INFINITI QX56 PROBLEMS | SAFETY RECALLS & DEFECTS

Access the National Highway Traffic Safety database of INFINITI QX56 recalls and defective parts found on INFINITI QX56 automobiles. The National Highway Traffic Safety administration is authorized to order the INFINITI QX56 manufacturers to recall and repair vehicles or parts of motor vehicle equipment when its investigation indicates that they contain serious safety defects in their design, structure, body, or performance.

Select Your Vehicle Year (Change Vehicle)

2010	2009	2008	2007
2006	2005	2004

Most Recent Recalls For INFINITI QX56

Vehicle	Component	Manufacterer
2004-2006 INFINITI QX56 ENGINE AND ENGINE COOLING Recall
2004-2006 INFINITI QX56	ENGINE AND ENGINE COOLING Units affected: 747480	NISSAN NORTH AMERICA, INC. Report Date: 2010-10-28
Summary: NISSAN IS RECALLING CERTAIN MODEL YEAR 2004-2006 ARMADA, TITAN, INFINITI QX56 AND MODEL YEAR 2005-2006 FRONTIER, PATHFINDER AND XTERRA VEHICLES. THE INTELLIGENT POWER DISTRIBUTION MODULE (IPDM) ASSEMBLY CONTAINS AN ENGINE CONTROL MODULE (ECM) RELAY THAT HAS A DIODE FOR ELECTRICAL CURRENT NOISE REDUCTION. THE ECM RELAY MAY ALLOW SILICON VAPOR TO FORM AND, OVER TIME, THE SILICON EVAPORATES FROM THE DIODE MOLDING WHICH CAUSES SILICON OXIDE TO DEVELOP ON THE ECM RELAY CONTACT DUE TO ARCING.
2008 INFINITI QX56 AIR BAGS:SIDE/WINDOW Recall
2008 INFINITI QX56	AIR BAGS:SIDE/WINDOW Units affected: 21	NISSAN NORTH AMERICA, INC. Report Date: 2010-07-22
Summary: NISSAN IS RECALLING MODEL YEAR 2008 NISSAN ARMADA AND INFINITI QX56 VEHICLES MANUFACTURED FROM FEBRUARY 7, 2007 THROUGH FEBRUARY 14, 2007. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 201, "PROTECTION IN INTERIOR IMPACT." AN OUT-OF-SPECIFICATION A-PILLAR FINISHER MIGHT IMPEDE THE CORRECT INFLATION OF THE SIDE CURTAIN AIR BAG NEAR THE UPPER PORTION OF THE B-PILLAR.
2010 INFINITI QX56 SUSPENSION:FRONT:CONTROL ARM:LOWER ARM Recall
2010 INFINITI QX56	SUSPENSION:FRONT:CONTROL ARM:LOWER ARM Units affected: 41649	NISSAN NORTH AMERICA, INC. Report Date: 2010-05-14
Summary: NISSAN IS RECALLING CERTAIN MODEL YEAR 2010 TITAN, ARMADA, QX56, FRONTIER, XTERRA, AND PATHFINDER VEHICLES MANUFACTURED FROM NOVEMBER 19, 2009 THROUGH MARCH 3, 2010. THE LOWER CONTROL LINK ASSEMBLY HAS TWO CYLINDRICAL COLLARS FORMING THE INBOARD ATTACHMENT POINTS TO THE CHASSIS. DUE TO AN IMPROPER WELDING PROCESS SOME COLLARS MAY CONTAIN WELDS THAT DO NOT MEET STRENGTH SPECIFICATIONS.
2005-2009 INFINITI QX56 FUEL SYSTEM, OTHER:STORAGE:FUEL GAUGE SYSTEM Recall
2005-2009 INFINITI QX56	FUEL SYSTEM, OTHER:STORAGE:FUEL GAUGE SYSTEM Units affected: 340000	NISSAN NORTH AMERICA, INC. Report Date: 2010-03-03
Summary: NISSAN IS RECALLING CERTAIN MODEL YEAR 2005-2009 TITAN, ARMADA, AND INFINITI QX56 VEHICLES. THE INSTRUMENT PANEL FUEL GAUGE MAY INACCURATELY DISPLAY THAT THE VEHICLE STILL HAS SOME FUEL, TYPICALLY ABOUT ONE QUARTER TANK, WHEN THE FUEL TANK IS EMPTY.
2008-2010 INFINITI QX56 SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES Recall
2008-2010 INFINITI QX56	SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES Units affected: 179383	NISSAN NORTH AMERICA, INC. Report Date: 2010-03-02
Summary: NISSAN IS RECALLING CERTAIN MODEL YEAR 2008-2010 TITAN, ARMADA, AND INFINITI QX56, AND MODEL YEAR 2008-2009 NISSAN QUEST VEHICLES. THE BRAKE PEDAL PIVOT PIN END WAS NOT SPIN-FORMED TO SPECIFICATION DURING THE MANUFACTURING PROCESS OF THE BRAKE PEDAL ASSEMBLY. THE PIVOT PIN COULD SLIDE AND CAUSE THE BRAKE PEDAL TO PARTIALLY DISENGAGE FROM THE BRAKE PEDAL BRACKET.
2005-2006 INFINITI QX56 EQUIPMENT:ELECTRICAL:AIR CONDITIONER Recall
2005-2006 INFINITI QX56	EQUIPMENT:ELECTRICAL:AIR CONDITIONER Units affected: 180664	NISSAN NORTH AMERICA, INC. Report Date: 2008-06-27
Summary: NISSAN IS RECALLING 180,664 MY 2005-2006 TITAN, ARMADA AND INFINITY QX56 VEHICLES MANUFACTURED AFTER MARCH 17, 2005, THAT ARE EQUIPPED WITH A VISTEON AIR CONDITIONING CONDENSER FAN MOTOR. THE FAN MOTOR MAY NOT BE PROPERLY SEALED ALLOWING EXCESSIVE WATER INTRUSION AND INADEQUATE DRAINAGE OF MOISTURE.