2005 HINO NA6J RECALLS/DEFECTS & PROBLEMS

2005 HINO NA6J RECALLS/DEFECTS & PROBLEMS

Access the National Highway Traffic Safety database of 2005 HINO NA6J recalls and defects found on 2005 HINO NA6J automobiles. The National Highway Traffic Safety administration is authorized to order the 2005 HINO NA6J manufacturers to recall and repair vehicles or parts of motor vehicle equipment when its investigation indicates that they contain serious safety defects in their structure, or performance.  Look up customer problems!

Select Component (Change Vehicle)

- STEERING
- STEERING:LINKAGES
- SUSPENSION:FRONT
- VEHICLE SPEED CONTROL:ACCELERATOR PEDAL

Most Recent Recalls For 2005 HINO NA6J

Vehicle	Component	Manufacterer
2005-2008 HINO NA6J SUSPENSION:FRONT Recall
2005-2008 HINO NA6J	SUSPENSION:FRONT Units affected: 16805	HINO MOTORS SALES U.S.A., INC. Report Date: 2008-04-30
Summary: HINO IS RECALLING 16,805 MY 2005-2008 NA6J, NB6J, NC6J, ND8J, NE8J, NJ8J, AND NV8J TRUCKS. THE TWO VERTICAL RIGHT/LEFT SIDE FRONT SPRING BRACKET BOLTS WERE NOT TIGHTENED PROPERLY DURING THE ASSEMBLY PROCESS. THIS MAY CAUSE INCREASED STRESS ON THE SPRING BRACKET WHICH CAN LEAD TO CRACKING OF THE BRACKET.
2005-2007 HINO NA6J STEERING:LINKAGES Recall
2005-2007 HINO NA6J	STEERING:LINKAGES Units affected: 5072	HINO MOTORS SALES U.S.A., INC. Report Date: 2006-05-18
Summary: ON CERTAIN TRUCKS, DURING ASSEMBLY, THE DRAG LINK ATTACHMENT NUTS AT THE PITMAN ARM AND STEERING ARM MAY HAVE BEEN INCORRECTLY TORQUED. RESIDUAL GREASE AND PAINT WHICH WAS APPLIED AS A RUST INHIBITOR ON THE STEERING ARM MAY HAVE CONTRIBUTED TO A LOSS OF TORQUE AFTER ASSEMBLY.
2005 HINO NA6J STEERING Recall
2005 HINO NA6J	STEERING Units affected: 3366	HINO MOTORS SALES U.S.A., INC. Report Date: 2004-09-20
Summary: ON CERTAIN TRUCKS, WHEN THE STEERING WHEEL IS BEING TURNED, THE DUST COVER MAY TWINE WITH THE STEERING SHAFT AND COULD RESULT IN THE STEERING WHEEL OPERATION BECOMING HEAVY.
2005 HINO NA6J VEHICLE SPEED CONTROL:ACCELERATOR PEDAL Recall
2005 HINO NA6J	VEHICLE SPEED CONTROL:ACCELERATOR PEDAL Units affected: 3366	HINO MOTORS SALES U.S.A., INC. Report Date: 2004-09-13
Summary: ON CERTAIN CAB AND CHASSIS TRUCKS, WHEN EXCESSIVE FORCE IS APPLIED TO THE ACCELERATOR PEDAL, BEYOND THAT REQUIRED TO ACHIEVE FULL ACCELERATION, THE PEDAL MAY BECOME WEDGED BETWEEN THE FLOOR PANEL AND THE CARPET.
2005 HINO NA6J STEERING:LINKAGES Recall
2005 HINO NA6J	STEERING:LINKAGES Units affected: 810	HINO MOTORS SALES U.S.A., INC. Report Date: 2004-04-28
Summary: ON CERTAIN TRUCKS, THE PINCH BOLT NUT OF THE YOKE CONNECTING THE STEERING GEARBOX AND THE STEERING WHEEL SHAFT BACKED OUT.