| Most Recent Recalls For HARLEY DAVIDSON 1000 |
| Vehicle | Component | Manufacterer |
1979 HARLEY DAVIDSON 1000 SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER Recall
|
| 1979 HARLEY DAVIDSON 1000 | SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER
Units affected: 21970 | HARLEY-DAVIDSON MOTOR CO.
Report Date: 1979-07-09 |
| Summary: THE REAR BRAKE MASTER CYLINDER PLASTIC PISTON EMPLOYS A NON-SPECIFIED MATERIAL WHICH MAY ALLOW EXCESSIVE WATER ABSORPTION. AS A RESULT, THE PLASTIC PISTON MIGHT STICK IN THE MASTER CYLINDER PISTON BORE AND CAUSE BRAKE DRAG. |  |
|
1978-1979 HARLEY DAVIDSON 1000 SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES Recall
|
| 1978-1979 HARLEY DAVIDSON 1000 | SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES
Units affected: 27546 | HARLEY-DAVIDSON MOTOR CO.
Report Date: 1979-07-09 |
| Summary: BECAUSE THE REAR BRAKE PEDAL IS MADE OF ALUMINUM CASTINGS IT COULD BREAK AT THE PEDAL ARM OR CLAMPING HOLE. | |
|
1979 HARLEY DAVIDSON 1000 SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES Recall
|
| 1979 HARLEY DAVIDSON 1000 | SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES
Units affected: 635 | HARLEY-DAVIDSON MOTOR CO.
Report Date: 1979-05-11 |
| Summary: THE REAR BRAKE FREE TRAVEL ADJUSTING BOLT AND NUT INSTALLED DURING VEHICLE ASSEMBLY MAY HAVE BEEN INCORRECTLY TIGHTENED. THIS COULD CAUSE THE BRAKE PEDAL TO BECOME JAMMED DURING BRAKE OPERATION. | |
|
1977-1978 HARLEY DAVIDSON 1000 SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER Recall
|
| 1977-1978 HARLEY DAVIDSON 1000 | SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER
Units affected: 3074 | HARLEY-DAVIDSON MOTOR CO.
Report Date: 1979-05-10 |
| Summary: THE INVOLVED CYCLES WERE PRODUCED WITH A REAR BRAKE MASTER CYLINDER PUSH ROD WHICH HAS INSUFFICIENT CONTACT AREA WITH THE REAR BRAKE MASTER CYLINDER PISTON. THIS COULD RESULT IN THE ROD PENETRATING THE PISTON DURING EXTREMELY HIGH PEDAL EFFORT. | |
|
1979 HARLEY DAVIDSON 1000 SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER Recall
|
| 1979 HARLEY DAVIDSON 1000 | SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER
Units affected: 370 | HARLEY-DAVIDSON MOTOR CO.
Report Date: 1979-04-17 |
| Summary: CERTAIN VEHICLES MAY HAVE BEEN EQUIPPED WITH FRONT BRAKE MASTER CYLINDERS WHICH HAVE FISSURES IN THE CYLINDER BODIES. THIS WOULD ALLOW BRAKE FLUID LEAKAGE THROUGH THE FISSURED SECTION. | |
|
1975-1977 HARLEY DAVIDSON 1000 SERVICE BRAKES, HYDRAULIC Recall
|
| 1975-1977 HARLEY DAVIDSON 1000 | SERVICE BRAKES, HYDRAULIC
Units affected: 79056 | HARLEY-DAVIDSON MOTOR CO.
Report Date: 1977-03-01 |
| Summary: ON THE INVOLVED VEHICLES, ONE OR BOTH OF THE FRONT BRAKE CALIPER BOLTS MAY BREAK. THIS COULD ALLOW THE BROKEN PORTION OF THE BOLT TO DRIFT INTO THE ADJACENT ROTATING WHEEL SPOKES. SHOULD BOTH CALIPER BOLTS BREAK, THE INNER CALIPER HALF MAY BECOME DETACHED FROM THE MOTORCYCLE. | |
|
