1984 GMC P35 RECALLS/DEFECTS & PROBLEMS

1984 GMC P35 RECALLS/DEFECTS & PROBLEMS

Access the National Highway Traffic Safety database of 1984 GMC P35 recalls and defects found on 1984 GMC P35 automobiles. The National Highway Traffic Safety administration is authorized to order the 1984 GMC P35 manufacturers to recall and repair vehicles or parts of motor vehicle equipment when its investigation indicates that they contain serious safety defects in their structure, or performance.  Look up customer problems!

Select Component (Change Vehicle)

- ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN
- FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP
- SEATS

Most Recent Recalls For 1984 GMC P35

Vehicle	Component	Manufacterer
1984-1985 GMC P35 SEATS Recall
1984-1985 GMC P35	SEATS Units affected: 46	GENERAL MOTORS CORP. Report Date: 1986-08-25
Summary: THREE BOLTS WHICH ATTACH THE SILL THAT SUPPORTS THE BASE OF THE SEAT WERE OMITTED; THEREFORE VEHICLES DO NOT COMPLY WITH FMVSS 210 AND FMVSS 207. CONSEQUENCE OF DEFECT: IN THE EVENT OF A CRASH, THE FLOOR PLATE COULD BUCKLE ALONG THE INBOARD SIDE CAUSING THE SEAT PEDESTAL TO BE IMBALANCED, AND INCREASING THE LIKELIHOOD OF INJURY TO THE SEAT OCCUPANT.
1982-1985 GMC P35 ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN Recall
1982-1985 GMC P35	ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN Units affected: 383	GENERAL MOTORS CORP. Report Date: 1985-10-15
Summary: THE FAN BLADE, WHEN SUBJECTED TO HIGH STRESS LEVELS, CAN FATIGUE AND BREAK APART AT THE HUB WHILE THE ENGINE IS RUNNING. CONSEQUENCE OF DEFECT: IF BREAKAGE OCCURS WHILE HOOD IS OPEN, A PERSON WORKING UNDER THE HOOD OR NEAR THE TRUCK COULD BE STRUCK BY A BLADE PART AND BE INJURED.
1984 GMC P35 FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP Recall
1984 GMC P35	FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP Units affected: 11305	GENERAL MOTORS CORP. Report Date: 1984-10-16
Summary: DUE TO A MANUFACTURING PROBLEM WITH THE FUEL TANK FILLER PIPE, THE FUEL CAP MAY IMPROPERLY SEAL THE END OF THE FILLER PIPE. THIS FAILS TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD 301, "FUEL SYSTEM INTEGRITY." IN THE EVENT OF A COLLISION, AN IMPROPERLY SEALED FILLER PIPE COULD ALLOW FUEL SPILLAGE.