FORD BRONCO II PROBLEMS | SAFETY RECALLS & DEFECTS

FORD BRONCO II PROBLEMS | SAFETY RECALLS & DEFECTS

Access the National Highway Traffic Safety database of FORD BRONCO II recalls and defective parts found on FORD BRONCO II automobiles. The National Highway Traffic Safety administration is authorized to order the FORD BRONCO II manufacturers to recall and repair vehicles or parts of motor vehicle equipment when its investigation indicates that they contain serious safety defects in their design, structure, body, or performance.

Select Your Vehicle Year (Change Vehicle)

1990	1989	1987	1986
1984

Most Recent Recalls For FORD BRONCO II

Vehicle	Component	Manufacterer
1990 FORD BRONCO II POWER TRAIN:AUTOMATIC TRANSMISSION Recall
1990 FORD BRONCO II	POWER TRAIN:AUTOMATIC TRANSMISSION Units affected: 792000	FORD MOTOR COMPANY Report Date: 1991-11-04
Summary: WHEN THE AUTOMATIC TRANSMISSION SHIFT LEVER IS PLACED IN THE PARK POSITION, THE PARK PAWL DOES NOT ALWAYS ABUT OR ENGAGE THE PARK GEAR.
1989 FORD BRONCO II SUSPENSION:FRONT:WHEEL BEARING Recall
1989 FORD BRONCO II	SUSPENSION:FRONT:WHEEL BEARING Units affected: 25000	FORD MOTOR COMPANY Report Date: 1989-07-05
Summary: FRONT WHEEL BEARING ADJUSTING NUT RETAINING KEYS MAY BE MISSING FROM FRONT AXLE ASSEMBLIES, ALLOWING THE NUT TO LOOSEN.
1986 FORD BRONCO II SEATS Recall
1986 FORD BRONCO II	SEATS Units affected: 90000	FORD MOTOR COMPANY Report Date: 1988-09-02
Summary: WIRING FOR THE POWER LUMBAR SEAT SYSTEM WAS ROUTED DIRECTLY BENEATH THE SEAT CUSHION SPRINGS AND MAY BE ABRADED BY THE SPRINGS.
1986-1987 FORD BRONCO II FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS Recall
1986-1987 FORD BRONCO II	FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS Units affected: 3600000	FORD MOTOR COMPANY Report Date: 1987-09-04
Summary: SPRING LOCK FUEL LINE COUPLING MAY NOT BE PROPERLY ENGAGED.
1987 FORD BRONCO II EQUIPMENT:OTHER:LABELS Recall
1987 FORD BRONCO II	EQUIPMENT:OTHER:LABELS Units affected: 17420	FORD MOTOR COMPANY Report Date: 1987-05-18
Summary: STICKERS CONCERNING HANDLING AND MANEUVERABILITY WHICH ARE AFFIXED TO DRIVERS SUN VISOR SLEEVES DO NOT MEET CRITERIA FOR PERMANENT ADHESION.
1987 FORD BRONCO II WHEELS:LUGS/NUTS/BOLTS Recall
1987 FORD BRONCO II	WHEELS:LUGS/NUTS/BOLTS Units affected: 84	AVIATOR VAN CONVERSIONS Report Date: 1987-03-23
Summary: ALUMINUM WHEELS MAY HAVE BEEN INSTALLED WITH IMPROPER LUG NUTS.
1986 FORD BRONCO II FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS Recall
1986 FORD BRONCO II	FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS Units affected: 30564	FORD MOTOR COMPANY Report Date: 1985-10-18
Summary: NYLON FUEL LINES ON THE FUEL RETURN SIDE OF THE FUEL PRESSURE REGULATOR ASSEMBLY MAY CRACK. CONSEQUENCE OF DEFECT: FUEL LINE COULD LEAK AND, IF AN IGNITION SOURCE IS PRESENT, CREATE THE POTENTIAL FOR A FIRE.
1986 FORD BRONCO II ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD Recall
1986 FORD BRONCO II	ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD Units affected: 7886	FORD MOTOR COMPANY Report Date: 1985-09-24
Summary: THE ELECTRONIC ENGINE CONTROL WIRING HARNESS INSULATION MAY BE DAMAGED DUE TO COPPER SPIKES PRODUCED DURING THE WELDING OF ITS WIRES. THIS CREATES A POTENTIAL FOR A SHORT CIRCUIT BETWEEN THE WIRES WHICH ENERGIZE THE FUEL PUMP, CAUSING SOME FUEL INJECTORS TO OPEN, DISCHARGING FUEL INTO THE ENGINE. CONSEQUENCE OF DEFECT: FUEL DISCHARGED INTO THE ENGINE WOULD EVENTUALLY LEAK THROUGH THE EXHAUST SYSTEM TO THE GROUND. THIS COULD RESULT IN A FIRE IF A SOURCE OF IGNITION IS PRESENT.
1984 FORD BRONCO II WHEELS:LUGS/NUTS/BOLTS Recall
1984 FORD BRONCO II	WHEELS:LUGS/NUTS/BOLTS Units affected: 3320	FORD MOTOR COMPANY Report Date: 1984-03-06
Summary: COMPONENTS IN THE LOCKING HUBS WERE IMPROPERLY HEAT-TREATED AND MAY CRACK OR FRACTURE UPON ENGAGEMENT OF THE FRONT DRIVE AXLES. THE BROKEN COMPONENT ON THE LEFT FRONT WHEEL MAY BECOME JAMMED AGAINST THE NUT.
1984 FORD BRONCO II SEAT BELTS:FRONT:ANCHORAGE Recall
1984 FORD BRONCO II	SEAT BELTS:FRONT:ANCHORAGE Units affected: 530000	FORD MOTOR COMPANY Report Date: 1983-12-20
Summary: THE BOLTS THAT ATTACH THE D-SHAPED RING FOR THE SHOULDER BELT ARE INADEQUATELY SUPPORTED BY THE MATERIAL IN WHICH THEY ARE MOUNTED. THE ATTACHMENT DOES NOT COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 210, "SEAT BELT ASSEMBLY ANCHORAGES".