| Most Recent Recalls For DODGE ASPEN |
| Vehicle | Component | Manufacterer |
1980 DODGE ASPEN SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS Recall
|
| 1980 DODGE ASPEN | SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
Units affected: 6617 | CHRYSLER CORPORATION
Report Date: 1979-09-11 |
| Summary: THE FRONT BRAKE HOSE ROUTING ON THE INVOLVED VEHICLES MAY ALLOW INTERFERENCE BETWEEN THE HOSES AND THE FRONT TIRES DURING EXTREME TURNING ANGLES. |  |
|
1979 DODGE ASPEN FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS Recall
|
| 1979 DODGE ASPEN | FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
Units affected: 13 | CHRYSLER CORPORATION
Report Date: 1978-09-06 |
| Summary: ON THE INVOLVED VEHICLES, THE FUEL FILTER INLET, OUTLET, AND VAPOR RETURN FUEL LINE HOSES MAY DETERIORATE IF CONTINUOUSLY EXPOSED TO UNDERHOOD TEMPERATURES GENERATED DURING VEHICLE OPERATION. IF HOSES FAIL, FUEL LEAKAGE COULD OCCUR. | |
|
1976-1978 DODGE ASPEN SUSPENSION:FRONT:CONTROL ARM:UPPER ARM Recall
|
| 1976-1978 DODGE ASPEN | SUSPENSION:FRONT:CONTROL ARM:UPPER ARM
Units affected: 1100000 | CHRYSLER CORPORATION
Report Date: 1978-05-01 |
| Summary: POSSIBLE FATIGUE FAILURE CAN OCCUR IN THE FRAME SUPPORT PLATES (FRONT SUSPENSION PIVOT BAR SUPPORT PLATE) THAT CONNECTS A PORTION OF THE FRONT SUSPENSION TO THE VEHICLE FRAME ON THE INVOLVED VEHICLES. | |
|
1976-1978 DODGE ASPEN LATCHES/LOCKS/LINKAGES:HOOD:LATCH Recall
|
| 1976-1978 DODGE ASPEN | LATCHES/LOCKS/LINKAGES:HOOD:LATCH
Units affected: 1207458 | CHRYSLER CORPORATION
Report Date: 1977-12-28 |
| Summary: ON THE INVOLVED VEHICLES, THE HOOD SECONDARY CATCH SYSTEM MAY BE MISALIGNED WHICH MAY CAUSE THE SECONDARY CATCH TO MALFUNCTION. CONSEQUENTLY, THE HOOD MAY NOT BE SECURELY LATCHED. | |
|
1975-1977 DODGE ASPEN FUEL SYSTEM, GASOLINE:CARBURETOR SYSTEM Recall
|
| 1975-1977 DODGE ASPEN | FUEL SYSTEM, GASOLINE:CARBURETOR SYSTEM
Units affected: 1300000 | CHRYSLER CORPORATION
Report Date: 1977-12-28 |
| Summary: ON THE INVOLVED VEHICLES, THE CARBURETOR ACCELERATOR PUMP SEAL CAN BECOME DISTORTED DUE TO CONTACT WITH CERTAIN TYPES OF GASOLINE. NORMALLY, WHEN THE ACCELERATOR PEDAL IS DEPRESSED, THE ACCELERATOR PUMP IS ACTIVATED TO PROVIDE ADDITIONAL GASOLINE REQUIRED FOR ACCELERATION. A DISTORTED SEAL HOWEVER, MAY PREVENT THE PUMP FROM DELIVERING THE PROPER AMOUNT OF FUEL. | |
|
1978 DODGE ASPEN STEERING:WHEEL AND HANDLE BAR Recall
|
| 1978 DODGE ASPEN | STEERING:WHEEL AND HANDLE BAR
Units affected: 22000 | CHRYSLER CORPORATION
Report Date: 1977-11-28 |
| Summary: THE COLUMNS MAY CONTAIN STEERING SHAFTS IN WHICH THE STEERING COLUMN COUPLING ROLL PIN RETAINING NOTCH WAS MACHINED TOO DEEP. THIS MAY CAUSE THE STEERING WHEEL SHAFT TO BECOME DISENGAGED FROM THE REST OF THE STEERING ASSEMBLY. | |
|
1976-1978 DODGE ASPEN SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS Recall
|
| 1976-1978 DODGE ASPEN | SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
Units affected: 1225000 | CHRYSLER CORPORATION
Report Date: 1977-10-25 |
| Summary: ON THE INVOLVED VEHICLES, DAMAGE TO THE FRONT WHEEL BRAKE HYDRAULIC SYSTEM COULD OCCUR DUE TO FRONT WHEEL BRAKE LINE TUBE CORROSION. FRONT WHEEL BRAKE HOSES MAY BECOME BRITTLE AND CRACK DUE TO PROLONGED OPERATION IN COLD TEMPERATURES. | |
|
1978 DODGE ASPEN FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS Recall
|
| 1978 DODGE ASPEN | FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
Units affected: 241 | CHRYSLER CORPORATION
Report Date: 1977-10-14 |
| Summary: THE INVOLVED VEHICLES MAY HAVE BEEN BUILT WITH A FUEL SUPPLY TUBE, ROUTED IN SUCH A WAY THAT IT INTERFERES WITH THE FRAME CROSSMEMBER BRACKET. THIS TUBE IS LOCATED BETWEEN THE FUEL PUMP AND THE FUEL FILTER. | |
|
1977 DODGE ASPEN ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE Recall
|
| 1977 DODGE ASPEN | ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE
Units affected: 250 | CHRYSLER CORPORATION
Report Date: 1977-03-15 |
| Summary: THE REQUIRED MUFFLER TO FLOOR PAN HEAT SHIELDS WERE OMITTED FROM THE INVOLVED VEHICLES. THESE HEAT SHIELDS ARE NECESSARY TO PROTECT THE PASSENGER COMPARTMENT INTERIOR MATERIALS, INCLUDING SEAT BELT WEBBING, FROM HEAT DAMAGE. | |
|
1976 DODGE ASPEN EQUIPMENT:OTHER:LABELS Recall
|
| 1976 DODGE ASPEN | EQUIPMENT:OTHER:LABELS
Units affected: 2967 | CHRYSLER CORPORATION
Report Date: 1977-02-09 |
| Summary: THE INVOLVED VEHICLES MAY NOT COMPLY WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS". THE TIRE PRESSURE PLACARDS INCORRECTLY SPECIFY THE FRONT TIRE PRESSURE FOR MAXIMUM LOAD CONDITIONS. AS A RESULT, TIRES COULD FAIL DUE TO OVERLOADING. | |
|
