| Popular Plymouth Engine Repair Articles |
|
| RESTORING WORN CAM GEAR THRUST SURFACES |
| Method To Restore Worn Cam Gear Thrust Area On
Some Engine Blocks
Many late model engines (Chevrolet small block and 6.5L (396
CID), Dodge & Plymouth 3.4L (225 CID), Oldsmobile 4.0 & 4...... |
| VALVE STEM SEAL INSTALLATION |
| Caution On Installing Valve Stem Seals On
Chrysler, Dodge, Plymouth 5.2, 5.5, 5.8, 6.6 & 7.2L Engines
When installing intake valve stem seals in the subject engines, often the seals are crushed if...... |
| OIL PUMP INSTALLATION |
| Oil Pump Installation On
1962-81 Chrysler (Plymouth Dodge) V-8
4.5L, 5.2L, 5.5L & 5.9L (273, 318, 340 & 360 CID) Engines
Improper oil pump installations in the subject engine shave
resulted in serious...... |
| CAUTION ON CRANKSHAFT & BEARING I.D. |
| Caution On Crankshaft & Bearing Identification On
Chrysler, Dodge & Plymouth Engines
It has been reported that many of the subject crankshafts are being improperly identified as ...... |
| BEARING KNOCK |
| Bearing Knock On
Chrysler Products Engines with Air Conditioning
Chrysler, Dodge and Plymouth vehicles equipped with air conditioning may develop a slight bearing knock due...... |
| VALVE CROSSHEAD CLEARANCE |
| Valve Crosshead To Rocker Lever Clearance On
NH, NT & V-1710 Series Cummins Engines
Valve crosshead nose to rocker lever clearance on the subject engines must be checked during engine...... |
| ENGINE BOLT TORQUE |
| Engine Bolt Torque Information On
GM (Chevrolet) 1977 L-4, L-6 & V-8 Engines
Chevette L-4 Engine Torque Bolt Specifications
Usage...... |
| CRANKSHAFTS INDUSTRIAL |
|
Crankshafts Used In Industrial Applications On
GM (Chevrolet) 5.7L (350 CID) Engines
When the GM (Chevrolet) 5.7L (350 CID) industrial engine is used in some applications such as lift trucks, the only crankshaft that is applicable has the...... |
| BURNED EXHAUST VALVES |
| Burned Exhaust Valves, Low Power & Hard Starting On
Cummins NH & NT Engines With Jacobs Brake 25B & 30
Cummins Engine Co. reported that if the following complaints are experienced in the NH and NT engines equipped with Jacobs brakes, the slave...... |
 |
