| Peugeot Engine >> HEAD GASKET SELECTION FOR 1.9L DIESEL |
Head Gasket Selection For
1982-99 Peugeot 1.9L XUD9 Diesel Engines
The AERA Technical Committee offers the following information for the head gasket selection for the 1982-99 Peugeot XUD9 diesel engines. This information should be considered anytime head gasket replacement is occurring.
Four different head gasket thickness options are currently available and they replace all previous head gasket selections. These gaskets provide a greater variety of gasket thickness options to choose from. Selecting the correct replacement head gasket will ensure proper engine specifications are maintained during engine repairs.
Selecting a replacement head gasket requires measuring the amount of piston protrusion above the deck of the block. After determining the piston height, select the appropriate replacement gasket from the chart below. The gaskets are further identified by a different number of notches on one end of each gasket.
Note: The charts in the original service manuals are no longer valid.
Part # Piston Protrusion Gasket thickness Notches
94-8132 .56mm-.0220/ .71mm-.0279 1.48mm-.0580 2
94-8133 .71mm-.0279/ .75mm-.0295 1.52mm-.0600 3
94-8134 .75mm-.0295/ .79mm-.0311 1.58mm-.0620 4
94-8135 .79mm-.0311/ .83mm-.0326 1.62mm-.0637 5
Add this chart to older Peugeot service and overhaul manuals (if applicable) and this information should also be used on Toro Reelmaster® 335-D/3500-D and Groundsmaster® 455-D units.
The AERA Technical Committee
Looking for replacement Peugeot engines? Visit our online Rebuilt Engines Store.
Need to fix your Peugeot engine? Access here the comprehensive online repair guide for your Peugeot engine.
Click Here to find a used Peugeot engine.
|
|
