| Hyundai Engine >> HEADBOLT TIGHTING SEQUENCE FOR 2001 HYUNDAI 2.0L ENGINES |
Head Bolt Tightening Sequence For
2001 Hyundai 2.0L Engines
The AERA Technical Committee offers the following information regarding the correct cylinder head tightening sequence for 2001 Hyundai 2.0L DOHC engines. Previously published information inadvertently showed the head bolt removal sequence.
To install the head on this engine refer to the following steps and also note Hyundai does not recommend reusing any head bolt more than once.
·Clean all gasket surfaces of the cylinder block and cylinder head and blow-dry with compressed air.
·Install a new cylinder head gasket; do not use any type of sealer or lubricant.
·Place the head onto engine and install all head bolts and tighten finger tight.
·Tighten all M10 bolts = 22 ft/lbs (30 Nm) and all M12 bolts to 26 ft/lbs (35 Nm) in sequence.
·Rotate all bolts in sequence 60°.
·Rotate all bolts again in sequence an additional 60° turn.
The AERA Technical Committee
Looking for replacement Hyundai engines? Visit our online Rebuilt Engines Store.
Need to fix your Hyundai engine? Access here the comprehensive online repair guide for your Hyundai engine.
Click Here to find a used Hyundai engine.
|
|
