Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2010 Toyota Corolla car and truck
repair procedures including Toyota engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2010 Toyota Corolla automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2010 Toyota Corolla
- 2010 Toyota Corolla XRS 2.4 L4 GAS, CC:2362, Fuel Injection
- 2010 Toyota Corolla S 1.8 L4 GAS, CC:1798, Fuel Injection, Engine VIN:, Desg:L
- 2010 Toyota Corolla LE 1.8 L4 GAS, CC:1798, Fuel Injection, Engine VIN:, Desg:L
- 2010 Toyota Corolla 1.8 L4 GAS, CC:1798, Fuel Injection, Engine VIN:, Desg:L
- 2010 Toyota Corolla XLE 1.8 L4 GAS, CC:1798, Fuel Injection, Engine VIN:, Desg:L
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2010 Toyota Corolla AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2010 Toyota Corolla cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2010 Toyota Corolla LE 1.8 L4 GAS
- Disconnect battery ground cable.
- Remove radiator grille protector.
- Remove front bumper assembly.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Remove thermistor assembly.
- Disconnect radiator reservoir tank hose from radiator assembly.
- Disconnect No. 1 radiator hose from radiator assembly.
- Disconnect No. 2 radiator hose from radiator assembly.
- Remove two bolts and two upper radiator supports.
- Remove two support cushions from two upper radiator supports.
- Disconnect hood lock assembly.
- Separate water bypass hos...
CLICK HERE TO GET FULL ACCESS TO 2010 Toyota Corolla RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2010 Toyota Corolla AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2010 Toyota Corolla cars and light trucks from 1990+
Heater Hose, Replace -> Bypass -> Inlet -> Outlet
Vehicle: 2010 Toyota Corolla S 1.8 L4 GAS
Inlet
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at heater core.
- Remove hose from heater core.
- Reposition hose clamp at water outlet.
- Remove hose from water outlet.
- Remove hose from vehicle.
- Reverse procedure to install.
Outlet
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at heater cor...
CLICK HERE TO GET FULL ACCESS TO 2010 Toyota Corolla RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2010 Toyota Corolla AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2010 Toyota Corolla cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2010 Toyota Corolla XLE 1.8 L4 GAS
Lower
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at radiator outlet.
- Remove hose from radiator.
- Reposition hose clamp at thermostat housing.
- Remove hose from thermostat housing.
- Remove hose from vehicle.
- Reverse proc...
CLICK HERE TO GET FULL ACCESS TO 2010 Toyota Corolla RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2010 Toyota Corolla AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2010 Toyota Corolla cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2010 Toyota Corolla 1.8 L4 GAS
Lower
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at radiator outlet.
- Remove hose from radiator.
- Reposition hose clamp at thermostat housing.
- Remove hose from thermostat housing.
- Remove hose from vehicle.
- Reverse proc...
CLICK HERE TO GET FULL ACCESS TO 2010 Toyota Corolla RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2010 Toyota Corolla AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2010 Toyota Corolla cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2010 Toyota Corolla XRS 2.4 L4 GAS
- Disconnect battery ground cable.
- Remove lefthand engine under cover.
- Remove righthand engine under cover.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Remove battery.
- Remove front bumper cover.
- Remove thermistor assembly.
- Disconnect radiator reserve tank hose from radiator assembly.
- Disconnect No. 1 radiator hose from radiator assembly.
- Disconnect No. 2 radiator hose from radiator assembly.
- On models with automatic transaxle, disconnect oil cooler hose.
- On all models, remove two bolts and two upper radiator supports.
- Remove two support cushions from ...
CLICK HERE TO GET FULL ACCESS TO 2010 Toyota Corolla RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2010 Toyota Corolla AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2010 Toyota Corolla cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2010 Toyota Corolla XRS 2.4 L4 GAS
Lower
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at radiator outlet.
- Remove hose from radiator.
- Reposition hose clamp at thermostat housing.
- Remove hose from thermostat housing.
- Remove hose from vehicle.
- Reverse proc...
CLICK HERE TO GET FULL ACCESS TO 2010 Toyota Corolla RADIATOR & HOSE REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2010 Toyota Corolla vehicle.
|
| Access the Complete guide! |
