Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2009 Toyota Tacoma car and truck
repair procedures including Toyota engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2009 Toyota Tacoma automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2009 Toyota Tacoma
- 2009 Toyota Tacoma 2.7 L4 GAS, CC:2694, Fuel Injection
- 2009 Toyota Tacoma 4.0 V6 GAS, CC:3956, Fuel Injection
- 2009 Toyota Tacoma PRE Runner 2.7 L4 GAS, CC:2694, Fuel Injection
- 2009 Toyota Tacoma PRE Runner 4.0 V6 GAS, CC:3956, Fuel Injection
- 2009 Toyota Tacoma X-RUNNER 4.0 V6 GAS, CC:3956, Fuel Injection
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2009 Toyota Tacoma AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2009 Toyota Tacoma cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2009 Toyota Tacoma PRE Runner 4.0 V6 GAS
Lower
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at radiator outlet.
- Remove hose from radiator.
- Reposition hose clamp at water inlet housing.
- Remove hose from water inlet housing.
- Remove hose from vehicle.
- Reverse pr...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Tacoma RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2009 Toyota Tacoma AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2009 Toyota Tacoma cars and light trucks from 1990+
Heater Hose, Replace -> Bypass -> Inlet -> Outlet
Vehicle: 2009 Toyota Tacoma X-RUNNER 4.0 V6 GAS
Inlet
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at heater core.
- Remove hose from heater core.
- Reposition hose clamp at water outlet.
- Remove hose from water outlet.
- Remove hose from vehicle.
- Reverse procedure to install.
Outlet
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at ...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Tacoma RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2009 Toyota Tacoma AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2009 Toyota Tacoma cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2009 Toyota Tacoma 4.0 V6 GAS
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Disengage nine clips, then remove radiator support to lefthand frame seal.
- Disconnect hose from radiator reserve tank.
- On models with automatic transaxle, remove two cooler hoses from clamp.
- On all models, remove four nuts from fan pulley.
- Remove fan and generator V b...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Tacoma RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2009 Toyota Tacoma AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2009 Toyota Tacoma cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2009 Toyota Tacoma PRE Runner 2.7 L4 GAS
Lower
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at radiator outlet.
- Remove hose from radiator.
- Reposition hose clamp at water inlet housing.
- Remove hose from water inlet housing.
- Remove hose from vehicle.
- Reverse pr...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Tacoma RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2009 Toyota Tacoma AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2009 Toyota Tacoma cars and light trucks from 1990+
Heater Hose, Replace -> Bypass -> Inlet -> Outlet
Vehicle: 2009 Toyota Tacoma PRE Runner 2.7 L4 GAS
Inlet
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at heater core.
- Remove hose from heater core.
- Reposition hose clamp at water outlet.
- Remove hose from water outlet.
- Remove hose from vehicle.
- Reverse procedure to install.
Outlet
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at ...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Tacoma RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2009 Toyota Tacoma AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2009 Toyota Tacoma cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2009 Toyota Tacoma 2.7 L4 GAS
- Disconnect battery ground cable.
- Remove four bolts, then remove engine under cover sub-assembly No. 1.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Disengage nine clips, then remove radiator support to lefthand frame seal.
- Loosen four nuts on fan pulley.
- Remove fan and generator V belt.
- Disconnect radiator reserve tank hose from radiator.
- On models with automatic transaxle, disconnect oil cooler inlet and outlet hoses from fan shroud.
- On all models, remove two fan shroud mounting bolts.
- Remove four nuts, then ...
CLICK HERE TO GET FULL ACCESS TO 2009 Toyota Tacoma RADIATOR & HOSE REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2009 Toyota Tacoma vehicle.
|
| Access the Complete guide! |
