2009 Nissan Murano Driveline, U-Joint & CV Axles Replacement (ONLINE REPAIR MANUALS)

Auto Parts Search


Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!
Help me findSearch
Get Full Access Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2009 Nissan Murano car and truck repair procedures including Nissan engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your 2009 Nissan Murano automobile. Try the Automotix DIY solution today!
DIY REPAIR SAMPLES > CONTINUE EXPLORING >

We have info for following modifications of 2009 Nissan Murano

  • 2009 Nissan Murano S 3.5 V6 GAS, CC:3498, Fuel Injection, Engine VIN:, Desg:A
  • 2009 Nissan Murano SL 3.5 V6 GAS, CC:3498, Fuel Injection, Engine VIN:, Desg:A
  • 2009 Nissan Murano LE 3.5 V6 GAS, CC:3498, Fuel Injection, Engine VIN:, Desg:A

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Nissan Murano AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Nissan Murano cars and light trucks from 1990+.

CV AXLE SHAFT, Replace -> Left Side -> Right Side
Vehicle: 2009 Nissan Murano SL 3.5 V6 GAS

Left Side

  • Raise and support vehicle and support it with safety stands in proper locations.
  • Remove wheel nuts and front tire.
  • Remove ABS wheel sensor from steering knuckle.
  • Remove cotter pin and wheel bearing locknut. Discard old cotter pin and install new one upon installation
  • Remove brake hose lock plate and remove hose from strut assembly.
  • Remove strut assembly and steering knuckle bolt and nut.
  • Remove driveshaft from steering knuckle. When removing driveshaft do not apply an excessive angle to driveshaft joint. Be careful not to excessively extend slide joint.
  • Remove drivesh...

CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Murano DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Nissan Murano AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Nissan Murano cars and light trucks from 1990+.

DRIVESHAFT, Replace
Vehicle: 2009 Nissan Murano SL 3.5 V6 GAS

  • Place vehicle in neutral.
  • Release parking brake.
  • Raise and support vehicle and support it with safety stands in proper locations.
  • Place reference mark on front driveline shaft flange yoke and companion flange of front final driveline. Paint is recommended for match marks. Never damage flange yoke and companion flange of front final drive.
  • Loosen mounting nuts of center bearing mount brackets with suitable tool.
  • Remove bolts and nuts from driveline com...

CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Murano DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Nissan Murano AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Nissan Murano cars and light trucks from 1990+.

CV AXLE SHAFT, Replace -> Left Side -> Right Side
Vehicle: 2009 Nissan Murano S 3.5 V6 GAS

Left Side

  • Raise and support vehicle and support it with safety stands in proper locations.
  • Remove wheel nuts and front tire.
  • Remove ABS wheel sensor from steering knuckle.
  • Remove cotter pin and wheel bearing locknut. Discard old cotter pin and install new one upon installation
  • Remove brake hose lock plate and remove hose from strut assembly.
  • Remove strut assembly and steering knuckle bolt and nut.
  • Remove driveshaft from steering knuckle. When removing driveshaft do not apply an excessive angle to driveshaft joint. Be careful not to excessively extend slide joint.
  • Remove drivesh...

CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Murano DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Nissan Murano AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Nissan Murano cars and light trucks from 1990+.

DRIVESHAFT, Replace
Vehicle: 2009 Nissan Murano LE 3.5 V6 GAS

  • Place vehicle in neutral.
  • Release parking brake.
  • Raise and support vehicle and support it with safety stands in proper locations.
  • Place reference mark on front driveline shaft flange yoke and companion flange of front final driveline. Paint is recommended for match marks. Never damage flange yoke and companion flange of front final drive.
  • Loosen mounting nuts of center bearing mount brackets with suitable tool.
  • Remove bolts and nuts from driveline com...

CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Murano DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Nissan Murano AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Nissan Murano cars and light trucks from 1990+.

DRIVESHAFT, Replace
Vehicle: 2009 Nissan Murano S 3.5 V6 GAS

  • Place vehicle in neutral.
  • Release parking brake.
  • Raise and support vehicle and support it with safety stands in proper locations.
  • Place reference mark on front driveline shaft flange yoke and companion flange of front final driveline. Paint is recommended for match marks. Never damage flange yoke and companion flange of front final drive.
  • Loosen mounting nuts of center bearing mount brackets with suitable tool.
  • Remove bolts and nuts from driveline com...

CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Murano DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Nissan Murano AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2009 Nissan Murano cars and light trucks from 1990+.

CV AXLE SHAFT, Replace -> Left Side -> Right Side
Vehicle: 2009 Nissan Murano LE 3.5 V6 GAS

Left Side

  • Raise and support vehicle and support it with safety stands in proper locations.
  • Remove wheel nuts and front tire.
  • Remove ABS wheel sensor from steering knuckle.
  • Remove cotter pin and wheel bearing locknut. Discard old cotter pin and install new one upon installation
  • Remove brake hose lock plate and remove hose from strut assembly.
  • Remove strut assembly and steering knuckle bolt and nut.
  • Remove driveshaft from steering knuckle. When removing driveshaft do not apply an excessive angle to driveshaft joint. Be careful not to excessively extend slide joint.
  • Remove drivesh...

CLICK HERE TO GET FULL ACCESS TO 2009 Nissan Murano DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

Shop online for auto body parts, engines, wheels, lights...

More parts
Help me findSearch
Auto Repair Quick Search
Help me find
Search DIY repair manuals by VIN...
Vehicle Identification Number is a unique serial number used by the automotive industry to identify individual motor vehicles

Find out what info we have for your vehicle

Get the Complete Technical Service Bulletins!
Get the Complete Technical Service Bulletins!Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2009 Nissan Murano vehicle.
Access the Complete guide!
Need To Fix Your Car or Truck?
Save Money With Free Car Insurance Quote
FREE car insurance quote
Enter Zip Code:
Auto Repair Quick Search
Help me find