Auto Parts Search
2009 Hyundai Genesis CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Hyundai REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Section
- Technical Service Bulletins
- Specifications
- Driveline, U-Joint & CV Axles Replacement
- Tire Pressure Monitoring System
- Starter & Alternator Replacement
- Cabin Air Filter Locations & Replacement
- Maintenance Lamp Reset
- Radiator & Hose Replacement
- Serpentine Belt Service
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Hyundai Genesis AUTOMOBILES
DRIVESHAFT, Replace
Vehicle: 2009 Hyundai Genesis 3.8 3.8 V6 GAS
- Raise and support vehicle.
- Remove wheel lug nuts.
- Remove brake caliper mounting bolts, and then place brake caliper assembly with wire.
- Remove split pin, then remove castle nut and washer from front hub.
- Washer should be assembled with convex surface outward when installing castle nut and split pin.
- Remove rear brake lining.
- Loosen trailing arm mount bolt & nut and than remove trailing arm.
- Loosen assist arm mount nut and than disconnect assist arm.
- Remove lower arm mount bolt and than remove lower arm.
- Remove wheel speed se...
CLICK HERE TO GET FULL ACCESS TO 2009 Hyundai Genesis DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Hyundai Genesis AUTOMOBILES
Relearn Procedures -> Tire Pressure Sensor Initiation -> TPMS Receiver
Vehicle: 2009 Hyundai Genesis 4.6 4.6 V8 GAS
Tire Pressure Sensor Initiation
- Using Hyundai TPMS exciter tool, or equivalent, read the four tire pressure sensor IDs starting with sensor 1 the LH front wheel.
- Read the remaining sensors in the following order:
- Sensor 2, RH front wheel.
- Sensor 3, LH rear wheel.
- Sensor 4, RH rear wheel.
- Connect the Hyundai exciter tool, or equivalent, to the DLC (Data Link Connector) located under the LH side of the instrument panel.
- Using the tool, register the four sensor IDs to the TPMS receiver.
- Disconnect the tool from the DLC.
- Place the ignition switch in the Off position for 4 minutes, then tu...
CLICK HERE TO GET FULL ACCESS TO 2009 Hyundai Genesis TIRE PRESSURE MONITORING SYSTEM PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2009 Hyundai Genesis AUTOMOBILES
Alternator, Replace
Vehicle: 2009 Hyundai Genesis 4.6 4.6 V8 GAS
- Disconnect battery ground terminal first, then positive terminal.
- Remove engine cover.
- Remove air duct and air cleaner assembly.
- Turn tensioner counterclockwise using a suitable wrench and loosen. Remove drive belt.
- Remove oil dipstick and tube.
- Disconnect alte...
CLICK HERE TO GET FULL ACCESS TO 2009 Hyundai Genesis STARTER & ALTERNATOR REPLACEMENT PROCEDURES
CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES FOR 2009 Hyundai Genesis AUTOMOBILES
Cabin Air Filter Service -> Hyundai -> 2009 Genesis
Vehicle: 2009 Hyundai Genesis 3.8 3.8 V6 GAS
Under normal operating conditions the cabin air filter should be replaced every 12 months or 10,000 miles. In dusty areas change the cabin air filter more often.
- Open the glove compartment door.
- Disconnect the glove compartment damper.
- Remove the two glove compartment stoppers, then lower the glove compartment, Fig. .
- Remove the filter cover by pushing the cover knob, Fig. .
- Remove the cabin air filter e...
CLICK HERE TO GET FULL ACCESS TO 2009 Hyundai Genesis CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Hyundai Genesis AUTOMOBILES
Hyundai -> Check Engine/Malfunction Indicator Lamp (MIL) Lamp ->
Vehicle: 2009 Hyundai Genesis 4.6 4.6 V8 GAS
The Check Engine/MIL lamp will be illuminated for approximately 5 seconds when the ignition switch is placed in the On position without starting the engine. When the engine is started, the lamp should go out. If it remains lit, a diagnostic trouble code has been stored by the electronic control system. On models less OBD II, after diagnosis and repair are complete, place ignition switch in Off position, then clear diagnostic trouble codes by disconnecting the battery ground cable or the ECM connector for at least 15 seconds. On models equipped with OBD II, following diagnosis ...
CLICK HERE TO GET FULL ACCESS TO 2009 Hyundai Genesis MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2009 Hyundai Genesis AUTOMOBILES
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2009 Hyundai Genesis 4.6 4.6 V8 GAS
Lower
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at radiator outlet.
- Remove hose from radiator.
- Reposition hose clamp at water inlet.
- Remove hose from water inlet.
- Remove hose from vehicle.
- Reverse procedure t...
CLICK HERE TO GET FULL ACCESS TO 2009 Hyundai Genesis RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 2009 Hyundai Genesis AUTOMOBILES
Serpentine Drive Belt, Replace
Vehicle: 2009 Hyundai Genesis 3.8 3.8 V6 GAS
- Disconnect battery ground cable.
- Rotate tensioner counterclockwise using suit...
CLICK HERE TO GET FULL ACCESS TO 2009 Hyundai Genesis SERPENTINE BELT SERVICE PROCEDURES
TECHNICAL SERVICE BULLETINS FOR 2009 Hyundai Genesis AUTOMOBILES
OEM TSB listings for most 2009 Hyundai Genesis cars and light trucks sold in the U.S. from 1985+.
Document: STOP LAMP Z01 DIODE INSPECTION PROCEDURE Vehicle: 2009 Hyundai Genesis 3.8 3.8 V6 GAS Auto Systems: |
Document: ALARM SELF ACTIVATES - HOOD SWITCH PAD REPLACEMENT Vehicle: 2009 Hyundai Genesis 3.8 3.8 V6 GAS |
CLICK HERE TO GET FULL ACCESS TO 2009 Hyundai Genesis TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR 2009 Hyundai Genesis AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 2009 Hyundai Genesis cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 2009 Hyundai Genesis cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 2009 Hyundai Genesis cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 2009 Hyundai Genesis cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO 2009 Hyundai Genesis SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2009 Hyundai Genesis vehicle. |
Access the Complete guide! |