Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2009 Dodge Nitro car and truck
repair procedures including Dodge engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2009 Dodge Nitro automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2009 Dodge Nitro
- 2009 Dodge Nitro SXT 3.7 V6 GAS, CID:226, Fuel Injection, Aspiration:226, Engine VIN:, Desg:K
- 2009 Dodge Nitro SLT 3.7 V6 GAS, CID:226, Fuel Injection, Aspiration:226, Engine VIN:, Desg:K
- 2009 Dodge Nitro R/T 4.0 V6 GAS, CC:3952, CID:241, Fuel Injection, Aspiration:241, Engine VIN:, Desg:X
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2009 Dodge Nitro AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2009 Dodge Nitro cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2009 Dodge Nitro R/T 4.0 V6 GAS
- Disconnect battery ground cable.
- Raise and support vehicle.
- On 4WD models, remove front propeller shaft.
- On all models, remove solenoid nut from mounting stud.
- After nut has been removed, pull battery cable from mounting stud while removing electrical connector from solenoid terminal.
- Remove two starter mounting bolts.
- R...
CLICK HERE TO GET FULL ACCESS TO 2009 Dodge Nitro STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2009 Dodge Nitro AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2009 Dodge Nitro cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2009 Dodge Nitro SXT 3.7 V6 GAS
- Disconnect battery ground cable.
- Remove alternator drive belt.
- Unsnap plastic insulator cap from B+ output terminal.
- Remove B+ terminal mounting nut at rear of alternator. Disconnect terminal from alternator.
- Disconnect field wire connector at rear of alternator by pushing on connector tab.
- Remove one rear vert...
CLICK HERE TO GET FULL ACCESS TO 2009 Dodge Nitro STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2009 Dodge Nitro AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2009 Dodge Nitro cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2009 Dodge Nitro SLT 3.7 V6 GAS
- Disconnect battery ground cable.
- Raise and support vehicle.
- On 4WD models, remove front propeller shaft.
- On all models, remove two heat shield bolts and remove starter heat shield.
- Remove solenoid nut from mounting stud.
- After nut has been removed, pull battery cable from mounting stud while removing electrical connector from solenoid terminal.
- Remov...
CLICK HERE TO GET FULL ACCESS TO 2009 Dodge Nitro STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2009 Dodge Nitro AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2009 Dodge Nitro cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2009 Dodge Nitro R/T 4.0 V6 GAS
- Disconnect battery ground cable.
- Remove alternator drive belt.
- Unsnap plastic insulator cap from B+ output terminal.
- Remove B+ terminal mounting nut at rear of alternator. Disconnect terminal from alternator.
- Disconnect field wire connector at r...
CLICK HERE TO GET FULL ACCESS TO 2009 Dodge Nitro STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2009 Dodge Nitro AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2009 Dodge Nitro cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2009 Dodge Nitro SLT 3.7 V6 GAS
- Disconnect battery ground cable.
- Remove alternator drive belt.
- Unsnap plastic insulator cap from B+ output terminal.
- Remove B+ terminal mounting nut at rear of alternator. Disconnect terminal from alternator.
- Disconnect field wire connector at rear of alternator by pushing on connector tab.
- Remove one rear vert...
CLICK HERE TO GET FULL ACCESS TO 2009 Dodge Nitro STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2009 Dodge Nitro AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2009 Dodge Nitro cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2009 Dodge Nitro SXT 3.7 V6 GAS
- Disconnect battery ground cable.
- Raise and support vehicle.
- On 4WD models, remove front propeller shaft.
- On all models, remove two heat shield bolts and remove starter heat shield.
- Remove solenoid nut from mounting stud.
- After nut has been removed, pull battery cable from mounting stud while removing electrical connector from solenoid terminal.
- Remov...
CLICK HERE TO GET FULL ACCESS TO 2009 Dodge Nitro STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2009 Dodge Nitro vehicle.
|
| Access the Complete guide! |
