Auto Parts Search
2009 Chrysler Town & Country CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Chrysler REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Section
- Technical Service Bulletins
- Specifications
- Driveline, U-Joint & CV Axles Replacement
- Tire Pressure Monitoring System
- Starter & Alternator Replacement
- Cabin Air Filter Locations & Replacement
- Maintenance Lamp Reset
- Radiator & Hose Replacement
- Serpentine Belt Service
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2009 Chrysler Town & Country AUTOMOBILES
DRIVESHAFT, Replace
Vehicle: 2009 Chrysler Town & Country Touring 3.8 V6 GAS
- Raise and support vehicle.
- Mark orientation of propeller shaft rear flange.
- Using suitable jack stand, support propeller shaft. Do not allow propeller shaft to hang unsupported.
- Remove propeller shaft rear mounting bolts and support end of propeller shaft.
- Mark orientation of propeller shaft front flange.
- Remove propeller shaft front mounting bolts and remove propel...
CLICK HERE TO GET FULL ACCESS TO 2009 Chrysler Town & Country DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2009 Chrysler Town & Country AUTOMOBILES
Relearn Procedures
Vehicle: 2009 Chrysler Town & Country Limited 4.0 V6 GAS
When a tire pressure sensor has been replaced, the WIN will learn and store the sensor ID when the vehicle is driven continuously above 15 mph for 10 minutes. A new sensor ID can also be programmed directly into the WCM using a suitably ...
CLICK HERE TO GET FULL ACCESS TO 2009 Chrysler Town & Country TIRE PRESSURE MONITORING SYSTEM PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2009 Chrysler Town & Country AUTOMOBILES
Alternator, Replace
Vehicle: 2009 Chrysler Town & Country Limited 4.0 V6 GAS
- Disconnect battery ground cable.
- Raise and support vehicle.
- Remove drive belt shield.
- Rotate belt tensioner arm clockwise, using a suitable tool to relieve tension from drive belt.
- Remove drive belt, then release tension. Do not allow drive belt tensioner to snap back, as damage to tensioner and/or personal injury could result.
- Unsnap plastic insu...
CLICK HERE TO GET FULL ACCESS TO 2009 Chrysler Town & Country STARTER & ALTERNATOR REPLACEMENT PROCEDURES
CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES FOR 2009 Chrysler Town & Country AUTOMOBILES
Cabin Air Filter Service -> Chrysler LLC -> 2008-09 Caravan, Grand Caravan & Town & Country
Vehicle: 2009 Chrysler Town & Country Touring 3.8 V6 GAS
The cabin air filter should be replaced every 12,000 miles.
- Open the glove compartment door.
- Push inward on both sides of the glove compartment, then lower the glove compartment door.
- Carefully pivot the glove compartment downward.
- Through the glove compartment opening, disengage the cabin air filter access door retainers from the HVAC housing, then remove the cover, Fig. .
- Through the access door opening, remove the filter element, Fig. .
- Carefully install the new cabin air filter element into position through ...
CLICK HERE TO GET FULL ACCESS TO 2009 Chrysler Town & Country CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2009 Chrysler Town & Country AUTOMOBILES
Chrysler LLC Trucks -> Tire Pressure Monitoring System (TPMS) Warning Indicator -> 2001-09 Town & Country -> Relearn -> Reset
Vehicle: 2009 Chrysler Town & Country Touring 3.8 V6 GAS
Reset
The Low Tire Pressure indicator lamp will flash slowly and sound a single tone when tire pressure is low. If tire pressure drops lower, the indicator lamp will flash rapidly and the tone will be continuous. When the tire is inflated to the proper pressure the lamp and tone will turn Off. The vehicle may need to be driven at a speed above 15 MPH for up to 10 minutes for the TPMS to receive this information. If the lamp remains On, a problem in the low tire warning system is present and the low tire warning system must b...
CLICK HERE TO GET FULL ACCESS TO 2009 Chrysler Town & Country MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2009 Chrysler Town & Country AUTOMOBILES
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 2009 Chrysler Town & Country Touring 3.8 V6 GAS
Inlet
- Drain coolant into a suitable container.
- Loosen hose clamp connecting hose to heater core inlet tube.
- Loosen hose clamp connecting hose to heat control valve.
- Remove hose from vehicle.
- Reverse proced...
CLICK HERE TO GET FULL ACCESS TO 2009 Chrysler Town & Country RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 2009 Chrysler Town & Country AUTOMOBILES
Serpentine Drive Belt, Replace
Vehicle: 2009 Chrysler Town & Country Limited 4.0 V6 GAS
Do not let tensioner arm snap back to freearm position, sever damage may occur to tensioner. Belt tension is not adjustable. Belt adjustment is maintained by an automatic belt tensioner.
- Disconnect battery ground cable from b...
CLICK HERE TO GET FULL ACCESS TO 2009 Chrysler Town & Country SERPENTINE BELT SERVICE PROCEDURES
TECHNICAL SERVICE BULLETINS FOR 2009 Chrysler Town & Country AUTOMOBILES
OEM TSB listings for most 2009 Chrysler Town & Country cars and light trucks sold in the U.S. from 1985+.
Document: Flash: Power Sliding Door Module - Overly Sensitive Obstruction Detection Vehicle: 2009 Chrysler Town & Country LX 3.3 V6 FLEX Auto Systems: |
Document: Pre Delivery - Front Brake Rotor Corrosion Inspection & Procedure Vehicle: 2009 Chrysler Town & Country LX 3.3 V6 FLEX Auto Systems: |
CLICK HERE TO GET FULL ACCESS TO 2009 Chrysler Town & Country TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR 2009 Chrysler Town & Country AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 2009 Chrysler Town & Country cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 2009 Chrysler Town & Country cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 2009 Chrysler Town & Country cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 2009 Chrysler Town & Country cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO 2009 Chrysler Town & Country SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2009 Chrysler Town & Country vehicle. |
Access the Complete guide! |