Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Saturn Aura car and truck
repair procedures including Saturn engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Saturn Aura automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 Saturn Aura
- 2008 Saturn Aura Green Line 2.4 L4 ELECTRIC/GAS, CID:145, Fuel Injection, Aspiration:145, Engine VIN:, Desg:5
- 2008 Saturn Aura XE 2.4 L4 GAS, CID:145, Fuel Injection, Aspiration:145, Engine VIN:, Desg:5
- 2008 Saturn Aura XE 3.5 V6 GAS, CC:3490, CID:213, Fuel Injection, Aspiration:213, Engine VIN:, Desg:N
- 2008 Saturn Aura XR 3.6 V6 GAS, CID:217, Fuel Injection, Aspiration:217, Engine VIN:, Desg:7
BRAKE SERVICE PROCEDURES FOR 2008 Saturn Aura AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Saturn Aura cars and light trucks from 1990+.
Hydraulic Brake Systems -> Diagnosis & Testing
Vehicle: 2008 Saturn Aura XE 3.5 V6 GAS
Refer to...
CLICK HERE TO GET FULL ACCESS TO 2008 Saturn Aura BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Saturn Aura AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Saturn Aura cars and light trucks from 1990+.
Anti-Lock Brakes -> Delco/Bosch Type 7.2 -> System Service -> Aura & Malibu -> Auto Bleed -> Brake Pressure Modulator Valve (BPMV) -> Brake System Bleed -> Component Replacement -> Corvette -> Electronic Brake Control Module (EBCM) -> Hydraulic System Flush -> Lateral Accelerator -> Manual Bleed -> Pressure Bleed -> STS -> Wheel Speed Sensor -> XLR -> Yaw Rate Sensor -> Yaw Rate Sensor/Lateral Accelerometer
Vehicle: 2008 Saturn Aura Green Line 2.4 L4 ELECTRIC/GAS
Brake System Bleed
Auto Bleed
Perform manual or pressure bleeding as outlined in "Manual Bleed" or "Pressure Bleed" before auto bleeding system.
- Turn ignition switch to Off position.
- Raise and support vehicle, then remove tire and wheel assemblies.
- Inspect brake system for leaks and damage.
- Connect a suitably programmed scan tool to Data Link Connector (DLC), DLC is located in lefthand side of instrument panel below steering column.
- Turn ignition switch to On position. Do not start engine.
- Establish scan tool communications by selecting ABS/TCS, Special Functions and Automate Bleed Procedure...
CLICK HERE TO GET FULL ACCESS TO 2008 Saturn Aura BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Saturn Aura AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Saturn Aura cars and light trucks from 1990+.
Hydraulic Brake Systems -> Tightening Specifications
Vehicle: 2008 Saturn Aura XE 2.4 L4 GAS
CLICK HERE TO GET FULL ACCESS TO 2008 Saturn Aura BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Saturn Aura AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Saturn Aura cars and light trucks from 1990+.
Disc Brakes -> GM Single Piston -> Brake System Bleed -> Bleed Sequence -> Manual -> Pressure
Vehicle: 2008 Saturn Aura XR 3.6 V6 GAS
Brake fluid is corrosive to painted surfaces. Care must be taken not to allow brake fluid to come in contact with painted surfaces on vehicle.
When bleeding the brake system, always bleed righthand rear wheel circuit first, followed by the lefthand front, lefthand rear and, finally, righthand front.
Manual
Pressure bleeding is recommended for all hydraulic systems. However, if a pressure bleeder is unavailable, use the following procedure. Brake fluid damages painted surfaces. Immediately clean any spilled fluid.
- Remove vacuum reserve by pumping brakes several times with engine o...
CLICK HERE TO GET FULL ACCESS TO 2008 Saturn Aura BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Saturn Aura AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Saturn Aura cars and light trucks from 1990+.
Disc Brakes -> GM Single Piston -> Adjustments -> AURA & Malibu -> Cobalt & G5 -> Parking Brake -> Solstice & SKY
Vehicle: 2008 Saturn Aura XE 3.5 V6 GAS
Parking Brake
AURA & Malibu
- Apply and release park brake several times. Ensure lever is released completely.
- Turn ignition to On position and ensure red BRAKE lamp is not illuminated. If lamp is illuminated, verify following:
- Park brake lever is in released position and against stop.
- There is no slack in park brake cable.
- Raise and support vehicle.
- With parking brake pedal fully released, check parking brake levers on rear calipers. The levers should be against stops on caliper housings.
- Apply and release parking three to five times, this will allow cable tensioner to take up slack in the p...
CLICK HERE TO GET FULL ACCESS TO 2008 Saturn Aura BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Saturn Aura AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Saturn Aura cars and light trucks from 1990+.
Anti-Lock Brakes -> Delco/Bosch Type 7.2 -> Precautions -> ABS Service -> Connect -> Disconnect -> Hybrid Battery Service
Vehicle: 2008 Saturn Aura XE 2.4 L4 GAS
ABS Service
Before performing any repairs on the ABS system, note the following precautions:
- Before using electric welding equipment, disconnect EBTCM.
- Carefully note routing, position and mounting ABS and TCS wiring, connectors, clips and brackets. ABS and TCS are extremely sensitive to electromagnetic interference.
- Do not use a fast charger when battery is connected. Never disconnect battery from system with engine running.
- Ignition switch must be in Off position when disconnecting EBTCM.
- Many ABS system components are non-serviceable and must be replaced as assemblies. Do not disassemb...
CLICK HERE TO GET FULL ACCESS TO 2008 Saturn Aura BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2008 Saturn Aura vehicle.
|
| Access the Complete guide! |
