Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Land Rover LR2 car and truck
repair procedures including Land Rover engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Land Rover LR2 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 Land Rover LR2
- 2008 Land Rover LR2 SE 3.2 L6 GAS, CC:3192, Fuel Injection, Engine VIN:, Desg:N
- 2008 Land Rover LR2 HSE 3.2 L6 GAS, CC:3192, Fuel Injection, Engine VIN:, Desg:N
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Land Rover LR2 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Land Rover LR2 cars and light trucks sold in the U.S. from 1990+.
Land Rover -> Stability Control System Warning Indicator ->
Vehicle: 2008 Land Rover LR2 HSE 3.2 L6 GAS
The Stability Control System warning indicator should light when the ignition switch is placed in the On position and go out when after approximately 4 seconds. If the lamp flashes contin...
CLICK HERE TO GET FULL ACCESS TO 2008 Land Rover LR2 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Land Rover LR2 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Land Rover LR2 cars and light trucks sold in the U.S. from 1990+.
Land Rover -> Active Cornering Enhancement (ACE) Indicator Lamp ->
Vehicle: 2008 Land Rover LR2 SE 3.2 L6 GAS
The Active Cornering Enhancement (ACE) indicator lamp should illuminate red for 2 seconds, then amber for 2 seconds, when the ignition switch is placed in the On position to indicate the lamp is operational. If warning lamp comes on while driving the vehicle, a fau...
CLICK HERE TO GET FULL ACCESS TO 2008 Land Rover LR2 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Land Rover LR2 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Land Rover LR2 cars and light trucks sold in the U.S. from 1990+.
Land Rover -> Electronic Traction Control (ETC) System Warning Indicator ->
Vehicle: 2008 Land Rover LR2 SE 3.2 L6 GAS
The ETC warning indicator should light when the ignition switch is placed in the On position and go out when after approximately 4 seconds. If the lamp flashes continuously, a...
CLICK HERE TO GET FULL ACCESS TO 2008 Land Rover LR2 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Land Rover LR2 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Land Rover LR2 cars and light trucks sold in the U.S. from 1990+.
Land Rover -> Tire Pressure Monitoring System (TPMS) Warning Indicator -> 2008-09 LR-2 -> Relearn -> Reset
Vehicle: 2008 Land Rover LR2 HSE 3.2 L6 GAS
Reset
This warning lamp will illuminate when tire pressure falls below a specified psi. When the warning lamp illuminates, check the air pressure of the tire and adjust it to specified pressure. When the vehicle is driven after th...
CLICK HERE TO GET FULL ACCESS TO 2008 Land Rover LR2 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Land Rover LR2 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Land Rover LR2 cars and light trucks sold in the U.S. from 1990+.
Land Rover -> Anti-Lock Brake System Warning Lamp ->
Vehicle: 2008 Land Rover LR2 SE 3.2 L6 GAS
The ABS warning lamp should light when the ignition switch is placed in the On position and go out when after approximately 4 seconds. If the lamp remains illuminated or comes on while ...
CLICK HERE TO GET FULL ACCESS TO 2008 Land Rover LR2 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Land Rover LR2 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Land Rover LR2 cars and light trucks sold in the U.S. from 1990+.
Land Rover -> Transmission Oil Temperature Indicator ->
Vehicle: 2008 Land Rover LR2 SE 3.2 L6 GAS
The transmission oil temperature lamp will turn on when ignition switch is placed in On position and should turn off after a few seconds. If lamp illuminates while driving, the vehicle should be pulled off th...
CLICK HERE TO GET FULL ACCESS TO 2008 Land Rover LR2 MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2008 Land Rover LR2 vehicle.
|
| Access the Complete guide! |
