Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Jeep Liberty car and truck
repair procedures including Jeep engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Jeep Liberty automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 Jeep Liberty
- 2008 Jeep Liberty Sport 3.7 V6 GAS, CID:226, Fuel Injection, Aspiration:226, Engine VIN:, Desg:K
- 2008 Jeep Liberty Limited 3.7 V6 GAS, CID:226, Fuel Injection, Aspiration:226, Engine VIN:, Desg:K
BRAKE SERVICE PROCEDURES FOR 2008 Jeep Liberty AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Jeep Liberty cars and light trucks from 1990+.
Disc Brakes -> Caliper Service -> Aspen, Dakota & Durango -> Assemble -> Caravan & Town & Country -> Commander -> Compass, Grand Cherokee, Liberty, Nitro, Patriot & Wrangler -> Disassemble -> Front -> Full Size Pickup -> Inspection -> Installation -> Pacifica -> PT Cruiser -> Rear -> Removal -> Sprinter
Vehicle: 2008 Jeep Liberty Sport 3.7 V6 GAS
Caravan & Town & Country
Refer to for caliper replacement procedures.
Disassemble
- Remove caliper from adapter and rotor as outlined under . Do not disconnect brake hose from caliper. Support caliper at all times to prevent brake hose damage.
- Position caliper away from rotor to prevent brake fluid spillage on machined surface, then place a small block of wood between caliper fingers to prevent piston damage during removal.
- Gently depress brake pedal to force caliper piston out of bore, then secure brake pedal at any position below one inch of pedal travel to prevent master cylinder br...
CLICK HERE TO GET FULL ACCESS TO 2008 Jeep Liberty BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Jeep Liberty AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Jeep Liberty cars and light trucks from 1990+.
Disc Brakes -> Brake System Bleed -> Manual -> Pressure
Vehicle: 2008 Jeep Liberty Limited 3.7 V6 GAS
Manual
- Remove reservoir filler caps and fill reservoir with proper brake fluid.
- If calipers or wheel cylinders were overhauled, open all caliper and wheel cylinder bleed screws.
- Close each bleed screw as fluid starts to drip from them.
- Fill master cylinder reservoir once more before proceeding.
- Attach one end of bleed hose to bleed screw and insert opposite end in glass container partially filled with brake fluid, Fig. . Ensure bleed hose is immersed in fluid.
- Open up bleeder, then have an assistant press down brake pedal.
- Once brake pedal is down, close bleeder. Repeat bleeding unt...
CLICK HERE TO GET FULL ACCESS TO 2008 Jeep Liberty BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Jeep Liberty AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Jeep Liberty cars and light trucks from 1990+.
Disc Brakes -> Description
Vehicle: 2008 Jeep Liberty Sport 3.7 V6 GAS
These vehicles are equipped with dual piston calipers, sliding single piston systems, single non-metallic calipers, floating caliper-single piston or single piston caliper mounted disc brake systems.
Upon brake application, fluid pressure exerted against the caliper piston increases equally in all directions, creating the same pressure in the caliper bore and on the piston.
Press...
CLICK HERE TO GET FULL ACCESS TO 2008 Jeep Liberty BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Jeep Liberty AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Jeep Liberty cars and light trucks from 1990+.
Disc Brakes -> Brake Pad Service -> Aspen, Dakota & Durango -> Caravan & Town & Country -> Commander -> Compass, Grand Cherokee, Liberty, Nitro & Wrangler -> Front -> Full Size Pickup -> Inspection -> Installation -> Pacifica -> PT Cruiser -> Rear -> Removal -> Sprinter
Vehicle: 2008 Jeep Liberty Sport 3.7 V6 GAS
Caravan & Town & Country
Front
Removal
- Raise and support vehicle.
- Remove front wheel and tire assemblies.
- Remove two caliper-to-knuckle attaching bolts, then remove caliper by sliding away from adapter and lifting off rotor, Fig. . Support caliper firmly to prevent weight of caliper from damaging flexible hose.
- Remove outboard pad by prying pad retaining clip over raised area of caliper, then sliding pad down and off of caliper.
- Pull inboard pad away from caliper piston, until springs release from piston.
Installation
- Inspect piston seal for leaks and for ruptures in piston dust boot. ...
CLICK HERE TO GET FULL ACCESS TO 2008 Jeep Liberty BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Jeep Liberty AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Jeep Liberty cars and light trucks from 1990+.
Hydraulic Brake Systems -> Adjustments -> Height Sensing Proportioning Valve -> Park Brake Cable Tensioner -> Stop Lamp Switch
Vehicle: 2008 Jeep Liberty Limited 3.7 V6 GAS
Height Sensing Proportioning Valve
On these models the proportioning valve is not adjustable. Do not attempt to make adjustments.
Stop Lamp Switch
- Push and hold brake pedal in applied position.
- Push switch forward until fully seated against bracket.
- Release brake pedal.
- Lightly pull brake pedal rearward until master cylinder pushrod bottoms against master cylinder internal stop. This action will set switch plunger at proper stroke length.
Park Brake Cable Tensioner
Tensioner adjustment is only required when the tensioner, or a cable has been replaced or disconnected for service. To avoid fa...
CLICK HERE TO GET FULL ACCESS TO 2008 Jeep Liberty BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2008 Jeep Liberty AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2008 Jeep Liberty cars and light trucks from 1990+.
Disc Brakes -> Tightening Specifications
Vehicle: 2008 Jeep Liberty Sport 3.7 V6 GAS
CLICK HERE TO GET FULL ACCESS TO 2008 Jeep Liberty BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2008 Jeep Liberty vehicle.
|
| Access the Complete guide! |
