Auto Parts Search
We have info for following modifications of 2008 Dodge Nitro
- 2008 Dodge Nitro SXT 3.7 V6 GAS, CID:226, Fuel Injection, Aspiration:226, Engine VIN:, Desg:K
- 2008 Dodge Nitro SLT 3.7 V6 GAS, CID:226, Fuel Injection, Aspiration:226, Engine VIN:, Desg:K
- 2008 Dodge Nitro R/T 4.0 V6 GAS, CC:3952, CID:241, Fuel Injection, Aspiration:241, Engine VIN:, Desg:6
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Dodge Nitro AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Dodge Nitro cars and light trucks from 1990+
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 2008 Dodge Nitro R/T 4.0 V6 GAS
Inlet
- Drain cooling system into a suitable container.
- Reposition heater core inlet hose clamp at thermostat housing.
- Remove hose from thermostat housing.
- Reposition heater hose inlet clamp at heater core.
- Remove heater inlet hose from heater core.
- Remove hose from vehicle.
- Reverse procedu...
CLICK HERE TO GET FULL ACCESS TO 2008 Dodge Nitro RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Dodge Nitro AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Dodge Nitro cars and light trucks from 1990+
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 2008 Dodge Nitro SXT 3.7 V6 GAS
Inlet
- Drain cooling system into a suitable container.
- Reposition heater core inlet hose clamp at thermostat housing.
- Remove hose from thermostat housing.
- Reposition heater hose inlet clamp at heater core.
- Remove heater inlet hose from heater core.
- Remove hose from vehicle.
- Reverse procedu...
CLICK HERE TO GET FULL ACCESS TO 2008 Dodge Nitro RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Dodge Nitro AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Dodge Nitro cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2008 Dodge Nitro R/T 4.0 V6 GAS
If replacement of constant tension clamp is required, use only an original equipment clamp with matching number or letter.
- Drain coolant from radiator into suitable container.
- Remove front grille.
- Remove cooling fan from engine, if equipped.
- Remove two radiator mounting bolts.
- Disconnect connector for electric fan.
- Disconnect power steering cooler line from cooler.
- Disconnect radiator upper and lower hoses.
- Disconnect overflow hose from radiator.
- Lower part of radiator is equipped with two alignment dowel pins. They are located on bottom of radiator tank and fit into rubber grommets. T...
CLICK HERE TO GET FULL ACCESS TO 2008 Dodge Nitro RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Dodge Nitro AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Dodge Nitro cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2008 Dodge Nitro SXT 3.7 V6 GAS
If replacement of constant tension clamp is required, use only an original equipment clamp with matching number or letter.
- Drain coolant from radiator into suitable container.
- Remove front grille.
- Remove cooling fan from engine, if equipped.
- Remove two radiator mounting bolts.
- Disconnect connector for electric fan.
- Disconnect power steering cooler line from cooler.
- Disconnect radiator upper and lower hoses.
- Disconnect overflow hose from radiator.
- Lower part of radiator is equipped with two alignment dowel pins. They are located on bottom of radiator tank and fit into rubber grommets. T...
CLICK HERE TO GET FULL ACCESS TO 2008 Dodge Nitro RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Dodge Nitro AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Dodge Nitro cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2008 Dodge Nitro R/T 4.0 V6 GAS
Lower
- Raise and support vehicle.
- Drain cooling system into a suitable container.
- Reposition hose clamp from radiator.
- Remove radiator outlet hose from radiator.
- Reposition hose clamp from water inlet tube.
- Remove radiator outlet hose from water inlet tube and from vehicle.
- Reve...
CLICK HERE TO GET FULL ACCESS TO 2008 Dodge Nitro RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Dodge Nitro AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Dodge Nitro cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2008 Dodge Nitro SLT 3.7 V6 GAS
If replacement of constant tension clamp is required, use only an original equipment clamp with matching number or letter.
- Drain coolant from radiator into suitable container.
- Remove front grille.
- Remove cooling fan from engine, if equipped.
- Remove two radiator mounting bolts.
- Disconnect connector for electric fan.
- Disconnect power steering cooler line from cooler.
- Disconnect radiator upper and lower hoses.
- Disconnect overflow hose from radiator.
- Lower part of radiator is equipped with two alignment dowel pins. They are located on bottom of radiator tank and fit into rubber grommets. T...
CLICK HERE TO GET FULL ACCESS TO 2008 Dodge Nitro RADIATOR & HOSE REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2008 Dodge Nitro vehicle. |
Access the Complete guide! |