Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Dodge Charger car and truck
repair procedures including Dodge engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Dodge Charger automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 Dodge Charger
- 2008 Dodge Charger R/T 5.7 V8 GAS, CID:345, Fuel Injection, Aspiration:345, Engine VIN:, Desg:H
- 2008 Dodge Charger SXT 3.5 V6 GAS, CC:3497, CID:215, Fuel Injection, Aspiration:215, Engine VIN:, Desg:G
- 2008 Dodge Charger SE 3.5 V6 GAS, CC:3497, CID:215, Fuel Injection, Aspiration:215, Engine VIN:, Desg:G
- 2008 Dodge Charger SE 2.7 V6 GAS, CC:2700, CID:167, Fuel Injection, Aspiration:167, Engine VIN:, Desg:R
- 2008 Dodge Charger SRT8 6.1 V8 GAS, CC:6059, CID:370, Fuel Injection, Aspiration:370, Engine VIN:, Desg:W
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Dodge Charger AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Dodge Charger cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 2008 Dodge Charger SE 2.7 V6 GAS
- Raise and support vehicle on hoist.
- Mark transmission and axle flanges and rubber couplers for installation alignment.
- Remove crossmember, rear exhaust system and heat shield.
- Remove propeller shaft front and rear coupler-to-flange bolts.
- Remove center bearing mounting bolts.
- Remove propeller shaft with aid of helper. Never allow propeller shaft to hang from center bearing, or while only connected to transmission or rear axle flanges.
- Remove three couple...
CLICK HERE TO GET FULL ACCESS TO 2008 Dodge Charger DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Dodge Charger AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Dodge Charger cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 2008 Dodge Charger SXT 3.5 V6 GAS
- Raise and support vehicle on hoist.
- Mark transmission and axle flanges and rubber couplers for installation alignment.
- Remove crossmember, rear exhaust system and heat shield.
- Remove propeller shaft front and rear coupler-to-flange bolts.
- Remove center bearing mounting bolts.
- Remove propeller shaft with aid of helper. Never allow propeller shaft to hang from center bearing, or while only connected to transmission or rear axle flanges.
- Remove three couple...
CLICK HERE TO GET FULL ACCESS TO 2008 Dodge Charger DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Dodge Charger AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Dodge Charger cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 2008 Dodge Charger SXT 3.5 V6 GAS
Front
Halfshaft inner and outer boots are not serviceable separately. Boot replacement requires entire shaft assembly replacement.
Lefthand halfshaft is shorter than right. Identify and tag halfshafts upon removal to ensure proper installation.
- Raise and support vehicle, then remove tire and wheel assembly.
- While holding link ball joint stem from rotating, remove stabilizer link to shock clevis bracket nut.
- Slide link ball joint stem from clevis bracket.
- Remove clevis bracket to bottom of shock nut and pinch bolt.
- Remove shock clevis bracket to lower control arm nut and bolt.
- Pul...
CLICK HERE TO GET FULL ACCESS TO 2008 Dodge Charger DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Dodge Charger AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Dodge Charger cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 2008 Dodge Charger SE 3.5 V6 GAS
- Raise and support vehicle on hoist.
- Mark transmission and axle flanges and rubber couplers for installation alignment.
- Remove crossmember, rear exhaust system and heat shield.
- Remove propeller shaft front and rear coupler-to-flange bolts.
- Remove center bearing mounting bolts.
- Remove propeller shaft with aid of helper. Never allow propeller shaft to hang from center bearing, or while only connected to transmission or rear axle flanges.
- Remove three couple...
CLICK HERE TO GET FULL ACCESS TO 2008 Dodge Charger DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Dodge Charger AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Dodge Charger cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 2008 Dodge Charger R/T 5.7 V8 GAS
Front
Halfshaft inner and outer boots are not serviceable separately. Boot replacement requires entire shaft assembly replacement.
Lefthand halfshaft is shorter than right. Identify and tag halfshafts upon removal to ensure proper installation.
- Raise and support vehicle, then remove tire and wheel assembly.
- While holding link ball joint stem from rotating, remove stabilizer link to shock clevis bracket nut.
- Slide link ball joint stem from clevis bracket.
- Remove clevis bracket to bottom of shock nut and pinch bolt.
- Remove shock clevis bracket to lower control arm nut and bolt.
- Pul...
CLICK HERE TO GET FULL ACCESS TO 2008 Dodge Charger DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2008 Dodge Charger AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2008 Dodge Charger cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 2008 Dodge Charger SE 2.7 V6 GAS
Front
Halfshaft inner and outer boots are not serviceable separately. Boot replacement requires entire shaft assembly replacement.
Lefthand halfshaft is shorter than right. Identify and tag halfshafts upon removal to ensure proper installation.
- Raise and support vehicle, then remove tire and wheel assembly.
- While holding link ball joint stem from rotating, remove stabilizer link to shock clevis bracket nut.
- Slide link ball joint stem from clevis bracket.
- Remove clevis bracket to bottom of shock nut and pinch bolt.
- Remove shock clevis bracket to lower control arm nut and bolt.
- Pul...
CLICK HERE TO GET FULL ACCESS TO 2008 Dodge Charger DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
 | 1987 Dodge Charger Door Handle, Front, Driver Or Passenger Side, Without keyhole; A high quality, OE replacement door handle; Backed by 1-year, unlimited-mileage warranty.. | $10.79 |
 | 2010 Dodge Charger Mirror, Passenger Side. | $75.37 |
 | 2013 Dodge Charger 20" X 9" Alloy Wheel, ALLOY WHEEL, 20 X 9, 5 STUDS/LUGS, 4.5" BOLT DIA, 5 SPOKES, 25.5MM OFFSET, BLACK POLISHED HAND MASKED, HAS ALCOA STAMP IN WINDOW, , . | $337.45 |
 | 1978 Dodge Charger Special Edition V8, 5.9 L, 360 CID Rebuilt Engine, With smog, passenger car and light truck application, flat lifters., Warranty: 7-Year/70,000 Mile, . | $1,442.00 |
 | 2007 Dodge Charger Used Oil Pan, 3.5L, AWD, REMANUFACTURED. | $232.00 |
| 2012 Dodge Charger Used Alternator, 5.7, AUTO, AWD 5.7, Very Good. | $135.00 |
| More parts | ||
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2008 Dodge Charger vehicle.
|
| Access the Complete guide! |
