Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2008 Dodge Caliber car and truck
repair procedures including Dodge engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2008 Dodge Caliber automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2008 Dodge Caliber
- 2008 Dodge Caliber R/T 2.4 L4 GAS, CC:2360, CID:144, Fuel Injection, Aspiration:144, Engine VIN:, Desg:K
- 2008 Dodge Caliber SXT 1.8 L4 GAS, CC:1798, CID:110, Fuel Injection, Aspiration:110, Engine VIN:, Desg:C
- 2008 Dodge Caliber SXT 2.0 L4 GAS, CC:1998, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:B
- 2008 Dodge Caliber SE 1.8 L4 GAS, CC:1798, CID:110, Fuel Injection, Aspiration:110, Engine VIN:, Desg:C
- 2008 Dodge Caliber SE 2.0 L4 GAS, CC:1998, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:B
- 2008 Dodge Caliber SRT-4 2.4 L4 GAS, CC:2360, CID:144, Fuel Injection, Aspiration:144, Engine VIN:, Desg:F
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Dodge Caliber AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Dodge Caliber cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Cars -> Tire Pressure Monitoring System (TPMS) Warning Indicator -> 2007-09 Caliber -> Relearn -> Reset
Vehicle: 2008 Dodge Caliber SRT-4 2.4 L4 GAS
Reset
The Low Tire Pressure indicator lamp will flash slowly and sound a single tone when tire pressure is low. If tire pressure drops lower, the indicator lamp will flash rapidly and the tone will be continuous. When the tire is inflated to the proper pressure the lamp and tone will turn Off. The vehicle may need to be driven at a speed above 15 MPH for up to 10 minutes for the TPMS to receive this information. If the lamp remains On, a problem in the low tire warning system is present and the low tire warning system must be d...
CLICK HERE TO GET FULL ACCESS TO 2008 Dodge Caliber MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Dodge Caliber AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Dodge Caliber cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Cars -> Air Bag Warning Lamp ->
Vehicle: 2008 Dodge Caliber SXT 1.8 L4 GAS
This lamp should light for a approximately 6-8 seconds when the ignition is turned On as a bulb check. If the Air B...
CLICK HERE TO GET FULL ACCESS TO 2008 Dodge Caliber MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Dodge Caliber AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Dodge Caliber cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Cars -> Power Loss/Limit Lamp -> Chrysler, Dodge & Plymouth
Vehicle: 2008 Dodge Caliber SXT 2.0 L4 GAS
The Power Loss/Limit lamp should light for approximately 3 seconds after the ignition has been turned On as a bulb inspection. If improper or no signals are received by the logic module from various sensors, the logic modul...
CLICK HERE TO GET FULL ACCESS TO 2008 Dodge Caliber MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Dodge Caliber AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Dodge Caliber cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Cars -> Check Engine Lamp -> 2007-09 Caliber
Vehicle: 2008 Dodge Caliber SRT-4 2.4 L4 GAS
The Powertrain Control Module (PCM) monitors a variety of sensors and systems. Each time the ignition is turned On, the instrument panel Malfunction Indicator Lamp (MIL) should light for approximately 2 seconds and then go out. If the PCM senses a fault condition with a monitored circuit or if the PCM enters Limp-In mode, a Diagnostic Trouble Code (DTC) in is stored in the PCM memory. After diagnosing and servicing the vehicle, use a suitable scan tool to erase DTCs and to reset the MIL.
The lamp illuminates when the ignition is first turned to the on position to check the bulb ...
CLICK HERE TO GET FULL ACCESS TO 2008 Dodge Caliber MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Dodge Caliber AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Dodge Caliber cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Cars -> Anti-Lock Brake System (ABS) Warning Lamp -> 2007-09 Caliber
Vehicle: 2008 Dodge Caliber SE 2.0 L4 GAS
This lamp should light when the ignition is turned On. The lamp may light for as long as 30 seconds as a bulb and system inspection. If the lamp remains lit or lights while operating the vehicle, a fault condition in the anti-lock brake system is indicated. When the lamp is lit, turn ignition Off, then start the engine again. If the lamp still remains lit, the anti-lock brake system should be serviced. The brake system will ...
CLICK HERE TO GET FULL ACCESS TO 2008 Dodge Caliber MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2008 Dodge Caliber AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2008 Dodge Caliber cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Cars -> Low Coolant Warning Lamp ->
Vehicle: 2008 Dodge Caliber SXT 1.8 L4 GAS
The Low Coolant warning lamp should light whenever coolant level in the coolant reservoir is ...
CLICK HERE TO GET FULL ACCESS TO 2008 Dodge Caliber MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2008 Dodge Caliber vehicle.
|
| Access the Complete guide! |
