Auto Parts Search
We have info for following modifications of 2008 Chevrolet Tahoe
- 2008 Chevrolet Tahoe LS 5.3 V8 FLEX, CC:5328, CID:325, Fuel Injection, Aspiration:325, Engine VIN:, Desg:0
- 2008 Chevrolet Tahoe LS 5.3 V8 GAS, CC:5328, CID:325, Fuel Injection, Aspiration:325, Engine VIN:, Desg:J
- 2008 Chevrolet Tahoe LS 4.8 V8 GAS, CID:294, Fuel Injection, Aspiration:294, Engine VIN:, Desg:C
- 2008 Chevrolet Tahoe LT 5.3 V8 FLEX, CC:5328, CID:325, Fuel Injection, Aspiration:325, Engine VIN:, Desg:0
- 2008 Chevrolet Tahoe LT 5.3 V8 GAS, CC:5328, CID:325, Fuel Injection, Aspiration:325, Engine VIN:, Desg:J
- 2008 Chevrolet Tahoe LTZ 5.3 V8 FLEX, CC:5328, CID:325, Fuel Injection, Aspiration:325, Engine VIN:, Desg:0
- 2008 Chevrolet Tahoe LTZ 5.3 V8 GAS, CC:5328, CID:325, Fuel Injection, Aspiration:325, Engine VIN:, Desg:J
- 2008 Chevrolet Tahoe Hybrid 6.0 V8 ELECTRIC/GAS, CID:364, Fuel Injection, Aspiration:364, Engine VIN:, Desg:Y
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Chevrolet Tahoe AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Chevrolet Tahoe cars and light trucks sold in the U.S. from mid 1990's+.
Component Locations
Vehicle: 2008 Chevrolet Tahoe LS 4.8 V8 GAS
Refer to ...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Tahoe TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Chevrolet Tahoe AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Chevrolet Tahoe cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Installation -> Removal -> Tire Pressure Sensor (Snap In Style)
Vehicle: 2008 Chevrolet Tahoe LT 5.3 V8 FLEX
Tire Pressure Sensor (Snap In Style)
Each tire pressure sensor has an internal power supply which has a service life of 10 years.
Removal
- Loosen the lug nuts.
- Raise and support vehicle with jack stands, then remove the wheel and tire assembly.
- Prior to dismounting the tire from the wheel, note the following precautions:
- Position the bead breaking fixture 90, 180 and 270° from the valve stem when Separating the tire bead from the wheel.
- Position the wheel and tire so the valve stem is situated at the 2 o'clock position relative to the head. The tire iron or pry bar can be inserted...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Tahoe TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Chevrolet Tahoe AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Chevrolet Tahoe cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Installation -> Removal -> Tire Pressure Sensor (Snap In Style)
Vehicle: 2008 Chevrolet Tahoe Hybrid 6.0 V8 ELECTRIC/GAS
Tire Pressure Sensor (Snap In Style)
Each tire pressure sensor has an internal power supply which has a service life of 10 years.
Removal
- Loosen the lug nuts.
- Raise and support vehicle with jack stands, then remove the wheel and tire assembly.
- Prior to dismounting the tire from the wheel, note the following precautions:
- Position the bead breaking fixture 90, 180 and 270° from the valve stem when Separating the tire bead from the wheel.
- Position the wheel and tire so the valve stem is situated at the 2 o'clock position relative to the head. The tire iron or pry bar can be inserted...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Tahoe TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Chevrolet Tahoe AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Chevrolet Tahoe cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures -> Keyless Entry Transmitter Or DIC Method -> Scan Tool Method
Vehicle: 2008 Chevrolet Tahoe LTZ 5.3 V8 FLEX
Keyless Entry Transmitter Or DIC Method
- On models with standard ignition switch, place the ignition switch in the On position.
- On models with keyless ignition switch, place the ignition switch in the Accy position.
- On all models, using the keyless entry transmitters press the lock and unlock buttons at the same time until a horn chirp sounds indicating the learn mode has been actuated. The left front turn signal will also be illuminated.
- Using the DIC (Driver Information Center) press and release the Info button until the Tire Learn message is indicated on the DIC display. Depres...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Tahoe TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Chevrolet Tahoe AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Chevrolet Tahoe cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures -> Keyless Entry Transmitter Or DIC Method -> Scan Tool Method
Vehicle: 2008 Chevrolet Tahoe LT 5.3 V8 FLEX
Keyless Entry Transmitter Or DIC Method
- On models with standard ignition switch, place the ignition switch in the On position.
- On models with keyless ignition switch, place the ignition switch in the Accy position.
- On all models, using the keyless entry transmitters press the lock and unlock buttons at the same time until a horn chirp sounds indicating the learn mode has been actuated. The left front turn signal will also be illuminated.
- Using the DIC (Driver Information Center) press and release the Info button until the Tire Learn message is indicated on the DIC display. Depres...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Tahoe TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2008 Chevrolet Tahoe AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2008 Chevrolet Tahoe cars and light trucks sold in the U.S. from mid 1990's+.
Wiring Diagrams -> Wire Color Code Identification
Vehicle: 2008 Chevrolet Tahoe LT 5.3 V8 GAS
Refer to Figs. through for w...
[[table data]]CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Tahoe TIRE PRESSURE MONITORING SYSTEM PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2008 Chevrolet Tahoe vehicle. |
Access the Complete guide! |