Auto Parts Search
We have info for following modifications of 2008 Chevrolet Malibu
- 2008 Chevrolet Malibu LS 2.4 L4 GAS, CID:145, Fuel Injection, Aspiration:145, Engine VIN:, Desg:5
- 2008 Chevrolet Malibu LT 3.6 V6 GAS, CID:217, Fuel Injection, Aspiration:217, Engine VIN:, Desg:7
- 2008 Chevrolet Malibu LT 2.4 L4 GAS, CID:145, Fuel Injection, Aspiration:145, Engine VIN:, Desg:5
- 2008 Chevrolet Malibu LTZ 3.6 V6 GAS, CID:217, Fuel Injection, Aspiration:217, Engine VIN:, Desg:7
- 2008 Chevrolet Malibu LTZ 2.4 L4 GAS, CID:145, Fuel Injection, Aspiration:145, Engine VIN:, Desg:5
- 2008 Chevrolet Malibu Classic LS 2.2 L4 GAS, CC:2198, CID:134, Fuel Injection, Aspiration:134, Engine VIN:, Desg:F
- 2008 Chevrolet Malibu Classic LS 3.5 V6 GAS, CC:3490, CID:213, Fuel Injection, Aspiration:213, Engine VIN:, Desg:N
- 2008 Chevrolet Malibu Classic LT 3.5 V6 GAS, CC:3490, CID:213, Fuel Injection, Aspiration:213, Engine VIN:, Desg:N
- 2008 Chevrolet Malibu Hybrid 2.4 L4 ELECTRIC/GAS, CID:145, Fuel Injection, Aspiration:145, Engine VIN:, Desg:5
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Chevrolet Malibu AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Chevrolet Malibu cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2008 Chevrolet Malibu LTZ 3.6 V6 GAS
- Remove air cleaner
- Drain cooling system into suitable container.
- Remove lefthand and righthand engine mount struts.
- Remove inlet hose from radiator and PCM harness clip from fan shroud.
- Remove transaxle oil cooler lines from retainer clip at bottom of cooling fan shroud.
- Remove fan shroud clip from condenser tubes.
- Remove fan shroud to condenser hold down bracket bolt.
- Remove air deflectors from top of radiator.
- Remove cooling fan shroud bolts and coolant reservoir hose from radiator overflow neck.
- Remove ra...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Malibu RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Chevrolet Malibu AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Chevrolet Malibu cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2008 Chevrolet Malibu Classic LS 2.2 L4 GAS
- Drain engine coolant.
- Remove lefthand headlamp assembly mounting bolts.
- Lift headlamp assembly to unseat tabs on bottom edge of fender.
- Disconnect connector and remove headlamp.
- Remove righthand headlamp assembly mounting bolts.
- Lift headlamp assembly to unseat tabs on bottom edge of fender.
- Disconnect connector and remove headlamp.
- Loop suitable rope around upper two tabs of condenser and tie rope around upper engine compartment tie bar.
- Remove upper radiator support bracket bolts and support brackets.
- Remove surge tank outlet hose from radiator.
- Remove radiator inlet hose from radiato...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Malibu RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Chevrolet Malibu AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Chevrolet Malibu cars and light trucks from 1990+
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 2008 Chevrolet Malibu LT 2.4 L4 GAS
Inlet
- Drain cooling system into a suitable container.
- Remove evaporator hose assembly.
- Remove condenser tube.
- Reposition heater hose inlet clamp at heater core using hose clamp pliers J 38185 or equivalent.
- Remove heater inlet hose from heater core.
- Reposition heater core inlet hose clamp at engine using hose clamp pliers J 38185 or equivalent.
- Remove hose from engine.
- Remove hose from vehicle.
- Reverse procedure to in...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Malibu RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Chevrolet Malibu AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Chevrolet Malibu cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2008 Chevrolet Malibu LTZ 2.4 L4 GAS
- Drain cooling system.
- Remove air cleaner outlet resonator.
- Loosen radiator inlet hose clamp at radiator, then remove hose.
- Loosen radiator outlet hose clamp at radiator, then remove hose.
- On models equipped with VTi or automatic transaxle, proceed as follows:
- Clean upper transmission oil cooler line connection point and remove line from radiator.
- Remove left front wheelhouse liner.
- Remove left engine splash shield.
- On all models, remove cooling fan assembly from radiator by pushing up on fan shroud to unsnap retainers.
- Position cooling fan assembly away from radiator and support.
- Remove...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Malibu RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Chevrolet Malibu AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Chevrolet Malibu cars and light trucks from 1990+
Heater Hose, Replace -> Inlet -> Outlet
Vehicle: 2008 Chevrolet Malibu LT 3.6 V6 GAS
Inlet
- Drain cooling system into a suitable container.
- Reposition heater core inlet hose clamp at heater pipe assembly using hose clamp pliers J 38185 or equivalent.
- Remove hose from heater pipe assembly.
- Disconnect heater inlet hose from underhood junction box retainer clip.
- Reposition heater hose inlet clamp at water pump using hose clamp pliers J 38185 or equivalent.
- Remove heater inlet hose from water pump...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Malibu RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2008 Chevrolet Malibu AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2008 Chevrolet Malibu cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2008 Chevrolet Malibu LT 3.6 V6 GAS
- Remove air cleaner
- Drain cooling system into suitable container.
- Remove lefthand and righthand engine mount struts.
- Remove inlet hose from radiator and PCM harness clip from fan shroud.
- Remove transaxle oil cooler lines from retainer clip at bottom of cooling fan shroud.
- Remove fan shroud clip from condenser tubes.
- Remove fan shroud to condenser hold down bracket bolt.
- Remove air deflectors from top of radiator.
- Remove cooling fan shroud bolts and coolant reservoir hose from radiator overflow neck.
- Remove ra...
CLICK HERE TO GET FULL ACCESS TO 2008 Chevrolet Malibu RADIATOR & HOSE REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2008 Chevrolet Malibu vehicle. |
Access the Complete guide! |