Auto Parts Search
We have info for following modifications of 2007 Hyundai Tucson
- 2007 Hyundai Tucson GLS 2.0 L4 GAS, CC:1975, Fuel Injection, Engine VIN:, Desg:B
- 2007 Hyundai Tucson Limited 2.7 V6 GAS, CC:2656, Fuel Injection, Engine VIN:, Desg:D
- 2007 Hyundai Tucson SE 2.7 V6 GAS, CC:2656, Fuel Injection, Engine VIN:, Desg:D
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2007 Hyundai Tucson AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2007 Hyundai Tucson cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2007 Hyundai Tucson GLS 2.0 L4 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove split pin and driveshaft castle nut and washer from front hub.
- Disconnect wheel speed sensor from knuckle.
- Disconnect tie rod end ball joint from steering knuckle using suitable tool.
- Disconnect ball joint from knuckle using suitable tool.
- Remove lower arm ball joint mounting bolts.
- Disconnect driveshaft from axle hub using plastic hammer.
- Push axle hub outward and separate driveshaft from axle hub.
- Insert suitable tool between transaxle case and driveshaft a...
CLICK HERE TO GET FULL ACCESS TO 2007 Hyundai Tucson DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2007 Hyundai Tucson AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2007 Hyundai Tucson cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2007 Hyundai Tucson Limited 2.7 V6 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove split pin and driveshaft castle nut and washer from front hub.
- Disconnect wheel speed sensor from knuckle.
- Disconnect tie rod end ball joint from steering knuckle using suitable tool.
- Disconnect ball joint from knuckle using suitable tool.
- Remove lower arm ball joint mounting bolts.
- Disconnect driveshaft from axle hub using plastic hammer.
- Push axle hub outward and separate driveshaft from axle hub.
- Insert suitable tool between transaxle case and driveshaft a...
CLICK HERE TO GET FULL ACCESS TO 2007 Hyundai Tucson DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2007 Hyundai Tucson AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2007 Hyundai Tucson cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 2007 Hyundai Tucson Limited 2.7 V6 GAS
- Raise vehicle off ground and support it with safety stands in proper locations.
- Mark companion flange, flange yoke, and differential companion flange and rubber coupling with a line.
- Remove bolts securing driveline from companion flange. When removing driveline use care not to damage the boot. Insert a cloth into the boot to prevent it from being damaged.
- Separate driveline from transfer assembly.
- Remove center suppor...
CLICK HERE TO GET FULL ACCESS TO 2007 Hyundai Tucson DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2007 Hyundai Tucson AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2007 Hyundai Tucson cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 2007 Hyundai Tucson SE 2.7 V6 GAS
- Raise vehicle off ground and support it with safety stands in proper locations.
- Mark companion flange, flange yoke, and differential companion flange and rubber coupling with a line.
- Remove bolts securing driveline from companion flange. When removing driveline use care not to damage the boot. Insert a cloth into the boot to prevent it from being damaged.
- Separate driveline from transfer assembly.
- Remove center suppor...
CLICK HERE TO GET FULL ACCESS TO 2007 Hyundai Tucson DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2007 Hyundai Tucson AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2007 Hyundai Tucson cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2007 Hyundai Tucson SE 2.7 V6 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove split pin and driveshaft castle nut and washer from front hub.
- Disconnect wheel speed sensor from knuckle.
- Disconnect tie rod end ball joint from steering knuckle using suitable tool.
- Disconnect ball joint from knuckle using suitable tool.
- Remove lower arm ball joint mounting bolts.
- Disconnect driveshaft from axle hub using plastic hammer.
- Push axle hub outward and separate driveshaft from axle hub.
- Insert suitable tool between transaxle case and driveshaft a...
CLICK HERE TO GET FULL ACCESS TO 2007 Hyundai Tucson DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2007 Hyundai Tucson vehicle. |
Access the Complete guide! |