Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2007 Hyundai Entourage car and truck
repair procedures including Hyundai engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2007 Hyundai Entourage automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2007 Hyundai Entourage
- 2007 Hyundai Entourage SE 3.8 V6 GAS, CC:3778, Fuel Injection, Engine VIN:, Desg:3
- 2007 Hyundai Entourage Limited 3.8 V6 GAS, CC:3778, Fuel Injection, Engine VIN:, Desg:3
- 2007 Hyundai Entourage GLS 3.8 V6 GAS, CC:3778, Fuel Injection, Engine VIN:, Desg:3
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2007 Hyundai Entourage AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2007 Hyundai Entourage cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2007 Hyundai Entourage GLS 3.8 V6 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Loosen drain plug and drain transmission fluid into suitable container.
- Unstake driveshaft lock nut using suitable tools.
- Remove driveshaft castle nut from front hub.
- Disconnect tie rod end ball joint from steering knuckle using suitable tool.
- Remove split pin an lower arm bolt and nut.
- Tap on driveshaft front hub assembly using plastic hammer.
- Remove bolts driveshaft heat protector.
- Remove inner shaft bearing bracket assembly mounting bolts.
- Insert suitable tool bet...
CLICK HERE TO GET FULL ACCESS TO 2007 Hyundai Entourage DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2007 Hyundai Entourage AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2007 Hyundai Entourage cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2007 Hyundai Entourage SE 3.8 V6 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Loosen drain plug and drain transmission fluid into suitable container.
- Unstake driveshaft lock nut using suitable tools.
- Remove driveshaft castle nut from front hub.
- Disconnect tie rod end ball joint from steering knuckle using suitable tool.
- Remove split pin an lower arm bolt and nut.
- Tap on driveshaft front hub assembly using plastic hammer.
- Remove bolts driveshaft heat protector.
- Remove inner shaft bearing bracket assembly mounting bolts.
- Insert suitable tool bet...
CLICK HERE TO GET FULL ACCESS TO 2007 Hyundai Entourage DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2007 Hyundai Entourage AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2007 Hyundai Entourage cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2007 Hyundai Entourage Limited 3.8 V6 GAS
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Loosen drain plug and drain transmission fluid into suitable container.
- Unstake driveshaft lock nut using suitable tools.
- Remove driveshaft castle nut from front hub.
- Disconnect tie rod end ball joint from steering knuckle using suitable tool.
- Remove split pin an lower arm bolt and nut.
- Tap on driveshaft front hub assembly using plastic hammer.
- Remove bolts driveshaft heat protector.
- Remove inner shaft bearing bracket assembly mounting bolts.
- Insert suitable tool bet...
CLICK HERE TO GET FULL ACCESS TO 2007 Hyundai Entourage DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2007 Hyundai Entourage vehicle.
|
| Access the Complete guide! |
