Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2007 Ford Edge car and truck
repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2007 Ford Edge automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2007 Ford Edge
- 2007 Ford Edge SEL 3.5 V6 GAS, CC:3496, CID:213, Fuel Injection, Aspiration:213, Engine VIN:, Desg:C
- 2007 Ford Edge SE 3.5 V6 GAS, CC:3496, CID:213, Fuel Injection, Aspiration:213, Engine VIN:, Desg:C
BRAKE SERVICE PROCEDURES FOR 2007 Ford Edge AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2007 Ford Edge cars and light trucks from 1990+.
Disc Brakes -> Adjustments -> E-250 w/Tension Limiter -> E-450 & E-550 -> E-Super Duty -> Expedition, Explorer, F-Super Duty, Mountaineer & Navigator -> Freestar & Monterey -> Parking Brake -> Rear Disc
Vehicle: 2007 Ford Edge SE 3.5 V6 GAS
Parking Brake
Expedition, Explorer, F-Super Duty, Mountaineer & Navigator
Rear Disc
- Remove rear disc brake rotor as outlined in .
- Measure inside diameter of parking brake drum using brake adjustment gauge tool No. D81L-1103-A, or equivalent, Fig. .
- Adjust parking brake shoe to .020 inch (.508 mm) less than drum measurement, Fig. .
- Reverse procedure to install.
E-Super Duty
E-250 w/Tension Limiter
- Loosen tension limiter nut to end of tension limiter threads.
- Depress brake pedal to last detent position (17 clicks).
- Measure and record exposed length of cinch strap, Fig. .
- Tighten tension limiter n...
CLICK HERE TO GET FULL ACCESS TO 2007 Ford Edge BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2007 Ford Edge AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2007 Ford Edge cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> E-Series -> Edge, Escape, Mariner & MKX -> Expedition, Explorer, Explorer Sport & Sport/Trac, F-150, Mark LT, Mountaineer & Navigator -> F-Super Duty -> Freestar & Monterey -> Less Hydro Max -> Master Cylinder -> Ranger -> With Hydro-Max
Vehicle: 2007 Ford Edge SE 3.5 V6 GAS
Master Cylinder
E-Series
- Drain brake master cylinder with suitable suction device.
- Remove coolant reservoir.
- On models equipped with Hydro Boost, remove three power distribution box bracket bolts and position box aside.
- On all models, remove speed control deactivator switch.
- Disconnect fluid level sensor connector.
- Remove and discard master cylinder mounting nuts.
- Disconnect master cylinder brake tubes.
- Remove master cylinder cylinder.
- Reverse procedure to install, noting the following:
- Torque master cylinder mounting nuts to 18 ft. lbs.
- Bleed brake system as outlined under .
F-Super D...
CLICK HERE TO GET FULL ACCESS TO 2007 Ford Edge BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2007 Ford Edge AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2007 Ford Edge cars and light trucks from 1990+.
Hydraulic Brake Systems -> Power Brake Unit Service
Vehicle: 2007 Ford Edge SEL 3.5 V6 GAS
The Hydro-Boost and Hydro-Max power brake booster...
CLICK HERE TO GET FULL ACCESS TO 2007 Ford Edge BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2007 Ford Edge AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2007 Ford Edge cars and light trucks from 1990+.
Power Brake Units -> Bendix Vacuum Brake Booster -> Power Brake Unit Service
Vehicle: 2007 Ford Edge SEL 3.5 V6 GAS
The Bendix vacuum brake booster unit is se...
CLICK HERE TO GET FULL ACCESS TO 2007 Ford Edge BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2007 Ford Edge AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2007 Ford Edge cars and light trucks from 1990+.
Disc Brakes -> Inspection -> Brake Bleed -> Brake Disc Service -> Brake Linings -> Brake Roughness -> Caliper Inspection -> General Precautions
Vehicle: 2007 Ford Edge SE 3.5 V6 GAS
Brake Linings
Remove both front wheels and inspect the brake discs, calipers and linings. (Wheel bearings should be inspected at this time and repacked if required).
Do not get any oil or grease on the linings. It is recommended that both front wheel sets be replaced whenever a respective shoe and lining is worn or damaged. Inspect and, if required, replace rear brake linings also.
If the caliper is cracked or fluid leakage through the casting is evident, it must be replaced as a unit.
Brake Roughness
The most common cause of brake chatter on disc brakes is a variation in thickness of the...
CLICK HERE TO GET FULL ACCESS TO 2007 Ford Edge BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2007 Ford Edge AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2007 Ford Edge cars and light trucks from 1990+.
Power Brake Units -> Bendix Vacuum Brake Booster -> Brake Booster, Replace -> E-Series, Expedition, Explorer, Explorer Sport & Sport/Trac, F-150, Mark LT, Mountaineer & Navigator -> Edge, Escape, Mariner & MKX -> F-Super Duty -> Freestar & Monterey -> Ranger
Vehicle: 2007 Ford Edge SEL 3.5 V6 GAS
F-Super Duty
- Remove air cleaner housing, if required.
- Remove brake master cylinder attaching nuts.
- Position brake master cylinder aside.
- Disconnect booster vacuum hose.
- Disconnect power distribution box auxiliary relay and set aside.
- Remove fuse panel cover.
- Remove brake pedal position switch self-locking pin.
- Remove brake pedal position switch and brake booster pushrod from brake pedal pin.
- Remove power brake booster nuts.
- Remove power brake booster.
- Reverse procedure to install. Torque booster mounting nuts to 16-21 ft. lbs.
Edge, Escape, Mariner & MKX
- Remove brake master cylinder a...
CLICK HERE TO GET FULL ACCESS TO 2007 Ford Edge BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2007 Ford Edge vehicle.
|
| Access the Complete guide! |
