2007 Chrysler Town & Country Maintenance Lamp Reset (ONLINE REPAIR MANUALS)

Electronic Vehicle Information Center is located in a overhead console, and is programmable by driver to suit his driving needs.

• Place ignition in On position.
• Depress and release menu push button to display first programmable feature.
• Momentarily depress and release step push button to step through following programmable features:
• Language.
• Display U.S. or metric.
• Service Intervals.
• Reset service distance?
• Use factory settings?
• Auto door locks.
• Remote unlock.
• Remot...

When the ignition is turned On, the lamp will light for approximately 6-12 seconds as a bulb inspection. If the lamp is illuminated with the engine running, the vehicle is usually drivable but the electronic throttle system must be diagnosed and servic...

When the ignition is turned On, the lamp will light for approximately 6-12 seconds as a bulb inspection. If the lamp is illuminated with the engine running, the vehicle is usually drivable but the electronic throttle system must be diagnosed and servic...

On models less OBD II, the Check Engine lamp should light for approximately 3 seconds after the ignition has been turned On as a bulb inspection. If improper or no signals are received by the Powertrain Control Module (PCM) from various sensors and monitored systems or if the PCM enters its Limp-In mode, the PCM will light the Check Engine lamp. On Chrysler, Dodge and Plymouth models, After diagnosing and servicing the vehicle, the PCM memory will be cleared after approximately 40 to 100 ignition key On-Off cycles or by using a suitable scan tool. ...

This lamp should light for a approximately 6-8 seconds when the ignition is turned On as a bulb check. If the warni...

When the ignition is turned On, the lamp will light for approximately 6-12 seconds as a bulb inspection. If the lamp is illuminated with the engine running, the vehicle is usually drivable but the electronic throttle system must be diagnosed and servic...