Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2006 Lexus RX400H car and truck
repair procedures including Lexus engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2006 Lexus RX400H automobile. Try the Automotix DIY solution today!
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Lexus RX400H AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Lexus RX400H cars and light trucks sold in the U.S. from 1990+.
Lexus -> Anti-Lock Brake System (ABS)/VSA System Warning Lamp -> 1990-2006
Vehicle: 2006 Lexus RX400H 3.3 V6 ELECTRIC/GAS
The anti-lock warning lamp is used to warn of an anti-lock brake system fault. The lamp will be lit during engine start-up, but should go out when the self-diagnostic system determines that the anti-lock system is functioning properly. If the lamp remains lit, an anti-lock fault is indicated. After diagnosis and repair are complete, the lamp may be reset as follows:
- Place ignition switch in On position.
- On models except GX470, 2002-03 ES300, IS300, LS430, LX470, SC430 and 2004-06 ES330 and RX330 models, connect jumper tool No. 09843-18020, or equivalent, betwe...
CLICK HERE TO GET FULL ACCESS TO 2006 Lexus RX400H MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Lexus RX400H AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Lexus RX400H cars and light trucks sold in the U.S. from 1990+.
Lexus -> Low Coolant Lamp ->
Vehicle: 2006 Lexus RX400H 3.3 V6 ELECTRIC/GAS
This lamp will be illuminated when the coolant level in the radiator drops below a pre-determined point. To reset the lamp, bring the c...
CLICK HERE TO GET FULL ACCESS TO 2006 Lexus RX400H MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Lexus RX400H AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Lexus RX400H cars and light trucks sold in the U.S. from 1990+.
Lexus -> Lexus Ride Control (LRC) Indicator Lamp ->
Vehicle: 2006 Lexus RX400H 3.3 V6 ELECTRIC/GAS
The electronic modulated air suspension system has internal self-diagnostic capabilities. When the ignition switch is placed in the On position, the LRC indicator lamp should light for approximately 2 seconds. If the lamp flashes continuously at 1 second intervals, the Electronic Control Unit (ECU) has stored a diagnostic trouble code.
Following diagnosis a...
CLICK HERE TO GET FULL ACCESS TO 2006 Lexus RX400H MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Lexus RX400H AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Lexus RX400H cars and light trucks sold in the U.S. from 1990+.
Lexus -> Tire Pressure Monitoring System (TPMS) Warning Indicator -> 2006-08 RX400h -> Registration -> Relearn -> Reset -> System Initialization -> Tire Pressure Sensor & Transmitter -> TPMS ECU
Vehicle: 2006 Lexus RX400H 3.3 V6 ELECTRIC/GAS
Reset
The Low Tire Pressure indicator lamp will flash slowly and/or sound a chime when tire pressure is low. When the tire is inflated to the proper pressure the lamp and tone will turn Off. If the lamp remains On, a problem in the low tire warning system is present and the low tire warning system must be diagnosed and serviced to reset the warning lamp.
Relearn
Registration
TPMS ECU
If replacing the TPMS ECU, prior to removal, use a suitably programmed scan tool to read the registered transmitter identification number for all wheels and note them for registration.
- Connect a suitably p...
CLICK HERE TO GET FULL ACCESS TO 2006 Lexus RX400H MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Lexus RX400H AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Lexus RX400H cars and light trucks sold in the U.S. from 1990+.
Lexus -> Air Bag Warning Lamp -> 2006-09 RX400h
Vehicle: 2006 Lexus RX400H 3.3 V6 ELECTRIC/GAS
- Connect two service wires to terminals Tc and CG of data link connector.
- Disconnect Tc within 3-10 seconds after DTC output begins.
- SRS warning lamps will illuminate 3 seconds later. Within 2-4 seconds, connect terminals Tc and CG of DLC.
- SRS warning lamp will go off within 2-4 seconds. Within 2-4 seconds, disconnect ter...
CLICK HERE TO GET FULL ACCESS TO 2006 Lexus RX400H MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2006 Lexus RX400H AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2006 Lexus RX400H cars and light trucks sold in the U.S. from 1990+.
Lexus -> Automatic Transmission Oil Temperature Warning Lamp ->
Vehicle: 2006 Lexus RX400H 3.3 V6 ELECTRIC/GAS
This lamp will be illuminated when automatic transmission or transfer case fluid temperature exceeds 302°F. If the lamp lights, allow vehicle to operate at idle speed until fluid temperature falls below 248°F; t...
CLICK HERE TO GET FULL ACCESS TO 2006 Lexus RX400H MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2006 Lexus RX400H vehicle.
|
| Access the Complete guide! |
