Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2006 Honda CR-V car and truck
repair procedures including Honda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2006 Honda CR-V automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2006 Honda CR-V
- 2006 Honda CR-V EX 2.4 L4 GAS, CC:2354, Fuel Injection
- 2006 Honda CR-V LX 2.4 L4 GAS, CC:2354, Fuel Injection
- 2006 Honda CR-V SE 2.4 L4 GAS, CC:2354, Fuel Injection
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2006 Honda CR-V AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2006 Honda CR-V cars and light trucks from 1990+
Radiator, Replace -> Japan-produced models -> U.S.A. produced models
Vehicle: 2006 Honda CR-V EX 2.4 L4 GAS
Japan-produced models
- Drain engine coolant into a suitable container.
- Remove hood support rod, then use it to prop hood in wide-open position.
- Remove bulkhead cover.
- Remove coolant reservoir hose and upper radiator hose.
- Raise vehicle on lift to full height.
- Remove splash shield.
- Disconnect engine coolant temperature (ECT) sensor 2 connector, and remove harness clip.
- Remove lower radiator hose.
- On models with automatic transaxles, remove automatic transmission fluid (ATF) cooler hoses, then plug hose and line.
- On all models, lower vehicle on lift.
- Disconnect fan motor connectors and hood...
CLICK HERE TO GET FULL ACCESS TO 2006 Honda CR-V RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2006 Honda CR-V AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2006 Honda CR-V cars and light trucks from 1990+
Heater Hose, Replace -> Bypass -> Inlet -> Outlet
Vehicle: 2006 Honda CR-V SE 2.4 L4 GAS
Inlet
- Disconnect negative cable from battery terminal.
- Drain engine coolant into a suitable container.
- Reposition hose clamp with suitable tool.
- Remove hose from heater core tube.
- Reposition hose clamp with suitable tool.
- Remove hose from thermostat housing tube.
- Reverse procedure to install.
Outlet
- Disconnect negative cable from battery terminal.
- Drain engine coolant into a suitable container.
- Reposition hose clamp wi...
CLICK HERE TO GET FULL ACCESS TO 2006 Honda CR-V RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2006 Honda CR-V AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2006 Honda CR-V cars and light trucks from 1990+
Heater Hose, Replace -> Bypass -> Inlet -> Outlet
Vehicle: 2006 Honda CR-V EX 2.4 L4 GAS
Inlet
- Disconnect negative cable from battery terminal.
- Drain engine coolant into a suitable container.
- Reposition hose clamp with suitable tool.
- Remove hose from heater core tube.
- Reposition hose clamp with suitable tool.
- Remove hose from thermostat housing tube.
- Reverse procedure to install.
Outlet
- Disconnect negative cable from battery terminal.
- Drain engine coolant into a suitable container.
- Reposition hose clamp wi...
CLICK HERE TO GET FULL ACCESS TO 2006 Honda CR-V RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2006 Honda CR-V AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2006 Honda CR-V cars and light trucks from 1990+
Heater Hose, Replace -> Bypass -> Inlet -> Outlet
Vehicle: 2006 Honda CR-V LX 2.4 L4 GAS
Inlet
- Disconnect negative cable from battery terminal.
- Drain engine coolant into a suitable container.
- Reposition hose clamp with suitable tool.
- Remove hose from heater core tube.
- Reposition hose clamp with suitable tool.
- Remove hose from thermostat housing tube.
- Reverse procedure to install.
Outlet
- Disconnect negative cable from battery terminal.
- Drain engine coolant into a suitable container.
- Reposition hose clamp wi...
CLICK HERE TO GET FULL ACCESS TO 2006 Honda CR-V RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2006 Honda CR-V AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2006 Honda CR-V cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2006 Honda CR-V LX 2.4 L4 GAS
Lower
- Drain engine coolant into a suitable container.
- Reposition hose clamp and remove hose from thermostat housing.
- Reposition hose clamp and remove hose from radiator outlet.
- Remove hose from vehicle.
- Reverse pr...
CLICK HERE TO GET FULL ACCESS TO 2006 Honda CR-V RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2006 Honda CR-V AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2006 Honda CR-V cars and light trucks from 1990+
Radiator, Replace -> Japan-produced models -> U.S.A. produced models
Vehicle: 2006 Honda CR-V SE 2.4 L4 GAS
Japan-produced models
- Drain engine coolant into a suitable container.
- Remove hood support rod, then use it to prop hood in wide-open position.
- Remove bulkhead cover.
- Remove coolant reservoir hose and upper radiator hose.
- Raise vehicle on lift to full height.
- Remove splash shield.
- Disconnect engine coolant temperature (ECT) sensor 2 connector, and remove harness clip.
- Remove lower radiator hose.
- On models with automatic transaxles, remove automatic transmission fluid (ATF) cooler hoses, then plug hose and line.
- On all models, lower vehicle on lift.
- Disconnect fan motor connectors and hood...
CLICK HERE TO GET FULL ACCESS TO 2006 Honda CR-V RADIATOR & HOSE REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2006 Honda CR-V vehicle.
|
| Access the Complete guide! |
